I'm sorry I missed your comment from the other day. I am so pleased the video was useful and you got great results of your own, it really boost your confidence when things turn out as they should. Good luck with future projects.

Thank you for your comment. I taught this subject so I try to think of the questions people asked and make sure that I have covered most of them in my videos. Good luck with your project.

Thank you for your comment. I was in for a huge culture shock when I first move from the UK to Houston. In the UK I had sometimes a 6-month waiting list for my work, here I had to change my approach as people want it now and many do not understand the quality so long as it looks the part. I remember one of my first projects in the UK was to remake some rather long, velvet curtains that were 80+ years old into shorter ones. The main fabric was still in good shape, slightly sun-bleached, and worn along the bottom hem. Here in the US, they would have been trashed after a number of years as they were not usable anymore. Always strive to do the best work even though it will not be seen by others.

Thank you for your comment. I am glad this video was of use. Good luck with your project.

Another trick you can use to get the pillow back inside is to sandwich the foam between two flat sheets of plastic film with a vaccum hose to vacuum the air to make the foam flattened. The suction and static friction will cause the two sheets of plastic film to stick together while the foam is compressing, and then once you get the foam inside the cover, you can pull the plastic sheets out from each side.

@@OptimusSatanas Thank you for this tip. I used this method in the past, and depending on the thickness of the plastic can dictate whether you can pull all the plastic out or leave some behind. For exterior cushions, it can sometimes be better to leave the plastic in place as it helps preserve the foam from rotting out too soon.

Thank you for the comment. It is far cheaper to make them yourself, good luck with your project.

Thank you for your comment. I'm originally from the Portsmouth area in Hampshire, although I left the UK in '96 for a little globe-trotting/living. I make a point of not boring people with my nonsense so cut most of it out as I edit the films. Good luck with your project.

Thank you. This is the way I was taught in college to wrap the foam and have learnt over the years to get things right the first time as it saves time in the long run. I wish you luck with your projects.

Thank you for your comment. I was taught by a number of people who would remind me that quality was in the little things that are not always seen. Good luck with your project.

Thank you for your feedback, I am so pleased that you found the video interesting and captivating too. I try to keep my videos short and to the point, although a few are rather long as there was so much information to put into them. It helps having taught people the subject to try to imagine them asking me questions, so I can give the answers as I work on these projects. Good luck with your future projects

Thank you for your comment, good luck with your project.

Thank you for your feedback. I have been teaching these subjects for a very long time and have learnt so much on my journey. I try to imagine all the questions that would be raised for each project and give reasons, show how or talk about alternative ways for doing things. I also realize when editing the things I miss out, so try to remember for the next project. Good luck with your projects, it is so much cheaper when you can do them yourself.

Thank you for your nice comment. I believe that one should share knowledge so others can benefit.

Thank you for your feedback. The lady was very pleased with her new seat cushions.

Thank you for your feedback. I am glad this video has inspired you. Good luck with your project.

Thank you for your comment. Having taught for a number of years, I try to think of the questions I would be asked when I put my videos together. Good luck with your project.

Thank you for your compliment and good luck with your project.

Thank you for your comment, good luck with your project.

Thank you for your feedback. Not that you asked my opinion on your couches, I will suggest keeping them a bit longer until you really fall in love with something better, move to somewhere you need to change them for something bigger or smaller, or they start falling apart.

Thank you for your comment. I used to teach at college and now I can teach by giving my knowledge away for free. Good luck with your project.

@@beinspired1487 It surely shows that you enjoy what you do! Even though you are retired, local craft schools could surely use your expertise. If know if you had classes here I would surely take them!

@@nataliew9174 Thank you. I have tried to make the videos along the lines of classes so that I have as much information on them with explanations too, then you can start and stop them when you need to. My daughter has suggested I should go back to school/college and teach even if it is only sewing. Like most retired people I have so much to do and not enough hours in the day to do it in.

Thank you for your feedback. The projects do take quite some time to film, but the magic of editing does take all the "Uhmm's and ahh's" as well as the silent moment out giving the illusion that I whip things out really quick. Good luck with your projects.

Thank you for your comment. I try to imagine people being in class with me and asking questions about the project at hand. This helps when I make the videos and I hope for the most part they are easy to follow. Good luck with your project.

Thank you for your lovely comment. A few years back I decided to video my work, as I will not be able to work forever and with my years of working both in the UK and the US, I felt that I have a lot of knowledge to pass on to othesr. Good luck with your project. Blessings back to you and your family.

Thank you for your feedback and good luck with your projects.

Thank you for your feedback. Good luck with your projects.

Thank you for your feed back, good luck with your projects

Thank you for the information. I am often asked where I get my foam from so I can add that to the list I give. Good Luck with your project.

Thank you for your comment and good luck with your project.

Thank you for your feedback, it is nice to know this video is of use to so many people. Good luck with your projects.

Thank you for your comment. I am pleased that the video was of use and with luck solved the problem with the cushion for some time to come,. Good luck with further projects

Thank you for your lovely comment, good luck with your project.

Thank you for your feedback.

Thank you for your feedback. I hope your projects turn out well.

Thank you for your comment. Good luck with your project.

Thank you for your comment. Living in the States does have its drawbacks for taking on some people's projects. Maybe I could work my way around the world one-day helping people with interior decorating items. I am like you and am busy with various personal works that pay the bills and then helping friends with their decorating problems too. I try to set a Sunday just to renovate my house otherwise it will never get finished and sold. I wish you luck on finding the time and these can be done one at a time not all in one go to get the project finished.

Thank you for taking the time to watch the video. Good luck with your project

Thank you. I recently had to make some really high seat cushions for a friend as she had purchased a dining table and chairs. The seat cushions sunk so low when sat on she said it reminded her of being too little to reach the table. It does make a huge difference if you can make the required alterations when or as needed. Good luck with yur project.

Thank you. Mx

Thank you for your comment. I try to make my videos easy to follow. Good luck with your projects

Thank you for your comment. Years of teaching practice have paid off. Good luck with your project.

Thank you for your comment, and good luck with your project.

Thank you. Good luck with your projects.

I haven't shown a sofa, because I feel if you follow the instructions for a chair it is very similar. You should be able to pick and mix from my videos and find a couple that fit the bill I am hoping to get a sofa in later next month and be able to show that once I have it edited. Good luck with your project

Thank you. I honestly didn't realise how useful this film would be to so many people. Good Luck with your project.

@@beinspired1487 huge help! I am so grateful for you making this video. Thank you so much

@@jennlynn5761, I have managed to put a few useful videos together over the past few years. I would much rather share my knowledge for free, so people can either save money or learn a new hobby.

Thank you for your feedback. I used to teach and remember that some students needed to be shown each step and others would get the idea after being told. I hope to have whole lessons in my videos to help all kinds of students Good luck with your projects.

@@beinspired1487 Thank you so much for taking the time to make these videos! I am one of those visual learners and your videos are the best on You Tube! You really show in your videos exactly what to do step by step! am going to tackle re- upholstery my older leather couch! The arms on the sofa are worn down and I can feel the wood coming through! I want to replace it with a blue chenille velvet and use diamond crystal head tacks! I know I can it especially with the help of your videos! Thanks once again!

@@jillberry2066 Thank you for the lovely complement regarding my videos. I have a couple of videos regading chairs that I had to replace the foam on the arms. Use a medium density foam as it has the body to keep the shape, just not the stiffness that the denser foam has which would not fold over the arm of the chair in the same way. If you have any quiries please do not hesitate to ask and I will see how I can help you. Your project sounds really classy and fun.

@@beinspired1487 Wow, thank you so much! I will keep you updated.

@@jillberry2066 It will be my pleasure to help you when you need it.

Thank you for your nice comment. I have not thought of ASMR as some I often have a lot of background noise in them. I work from home so there are often things going on such as dogs barking or my son playing music. I become so focused on the project at hand I do not notice till I am editing When I have a quieter place, I will look into the ASMR videos for subject matter, as I have often been told my voice is quite relaxing. Thank you for your suggestion. Good Luck with your projects. I also have a cooking channel that I am working on called Culinary Skool Reject if you are interested. I am just building it up at the moment.

Thank you for your feedback. and good luck with your projects.

Thank you for persisting in the search. Many times it is not the cover that needs to be replaced, and I do not believe in wasting money when there are more important things to spend it on. I hope you get the comfiness you require with this video as a guide. Good luck with your project, and happy camping home away from home.

@@beinspired1487 Thank you💕💜🙋🏼‍♀️

Gracias por su comentario, me alegro de que el video haya sido útil. Buena suerte con tu proyecto.

Thank you for your feedback, good luck with your projects.

Thank you for your comment. I try to give as much information as I can in my videos and think of the types of questions my students used to ask me. Good luck with your project.

Thank you for your feedback. I wish you luck with your project.

Thank you for your comment, I wish you luck with your projects.

Thank you for your kind words. I view your suggestions as positive feedback on these videos as well as future ideas, which other views will find informative too. May I ask which country or city you watch these videos from?

Thank you for your feedback. I'm sure you will do very well.

thank you so much. how do I find you on you tube .just look under cushion covers

@@patriciahoeft8911 I should think that if you subscribe on the video you watched should with luck get you to my channel. Then look on my sewing, upholstery or interior decorating play lists you should be able to find them. I have over 70 videos so it might take a little while to shuffle through them. I have quite a variety of projects to look through Good luck.

I have a video on "How to make a boxed pillow or cushion" All you need to do is leave off the piping and replace the zip border with an extended length of the plain border. When putting the top/bottom of the cushion cover on leave enough space to put the cushion in and hand sew the open side shut. Remember to make the inside cover a good 1"/2cm larger than the outside cover as this allowed the new cushion to fill out the new exterior cover. I also have a video on how to make a T cushion as well. I hope that these videos might be of use to you. Best of luck with your projects

Danke

Thank you for your question and I am very sorry that I somehow missed it. I do have a few videos that cover making up cusions covers. This one is very easy and doesn't have pipping on it, you don't have to put pipping onto seat or back cushions. kzfaq.info/get/bejne/gqt2ZdmAyZaxon0.html and kzfaq.info/get/bejne/ZtVpdreCppeqqps.html If you feel that you are quite adventurous this this one has pipping on and and the boarder that goes all the way around the cushion. kzfaq.info/get/bejne/o7xkgqd5ueC4oJs.html and kzfaq.info/get/bejne/d69xm8R6yMexYmw.html I hope these will be of assistance with your cushion making. Good luck with your projects.

Thank you for your question and your feedback on the video. I had the opportunity of swapping out feather back seat cushions for foam and wrap, this is the video I put together for it kzfaq.info/get/bejne/quBpaJOCrLS8fGg.html My friend was really pleased with the results. You can pack a loose filling around foam, but I feel this doesn't give a nice finish. The method in the film shows an added layer of dacron on the front and sides, you could add another layer if you wanted a fuller look. I hope this is of use to you, good luck with your project.

Thank you for your comment. I feel to show people a good way of doing something will help them achieve the best results. Good luck with your projects.

Thank you for your feedback. I do use this method for most outdoor/patio furniture, as it gives the best results. The cushions last longer if you bring them into the garage for storage when not being used. In the area I live in, the squirrels tear the cushions apart for the dacron to make their dreys/nests. Good luck with your project.

Thank you for your comment. I do use quilting cotton for many things, so do not just throw it away as it is often really quite useful for bulking up thin fabrics. I usually use a thick Dacron 2cm/1" thick is perfect for chair seats and seat cushions. I am sure you will have great results now that you have found this video to follow. Keep the Dacron a little tight over the foam and if there is already Dacron on the foam just put the new layer over the top, and you will do fine. I would love to know how you get on. Good luck with your project.

@@beinspired1487 Thank you for getting back to me! 🙂 I understand and appreciate the guidance. I will be buying the Dacron today.

Like everything that needs attention, take you time and do not rush.

Thank you for your feedback. I would have thought you can use the memory foam got these items. Use a carving /bread knife with a serrated blade to cut it if you do not have an electric carving knife or if you do use one and the blade gets residue stuck to it, or it is awkward to cut through. I have not used memory foam in a long time. As to the rest of the question, yes you can wrap it just like the rest of the video shows. Good luck with your projects.

@@beinspired1487 Thank you for your prompt response. Going to try out on a chair tomorrow. Will let you know how this turns out.

@@lindahosse8774 I would love to hear about your success. Just take your time, draw out your pattern and keep the knife at rightangles to the foam so your edges are as straight as poddible - even my cuts wonder a little and the batting hides the wonky cuts. Good luck.

@@beinspired1487 This is my first attempt at a complete upholstery project. I think I have everything purchased that I need. I just have a question. If I wrap the cushions with Dacron do I need any other batting (for tops or side edges ETC). IF I do what type do you recommend. I am using Dropcloths for the fabric for a true Farmhouse look. Since these are in the kitchen what can I use to make sure spills don't get through to the cushions.

@@lindahosse8774 Just wrap the foam as I have shown in the video, you don't need to add anything else to it. As for preventing stains, use Scotch Guard. That is what I have been advised works the best from many clients over the years.

Thank you for your feedback. The foam in the center could easily go up to 4 1/2" if you want the seat cushion to look plumper otherwise, your plan will give you a nice foam base for your seat cushion. As to the dacron/batting wrap, I tend to use a 1" thick for my seats and seat cushions as it gives more resistance. I seem to think that it is the 45 that I use more often. It is what every my supplier cuts for me so there is never a tag on it. I hope this is of use, good luck with your project.

Here in Houston, I use the Foam Store,. I believe they might be a franchise as I have seen other areas around the US. I also had another lady suggest Esty, apparently, there is a site called Global foam or something like that where she had ordered her foam from. She must have been delighted else she wouldn't have made the comment. The reference might be a little further down in this feed of comments. I would suggest spritzing the cats with water when they get on the furniture and also the furniture itself with diluted vinegar to help neutralize the smell. The cats don't like the spray and it does them no harm, if they're scratching up the sides of the furniture hit that with some hairspray. Good luck with your projects and the cats.

Thank you for your question. This video should be able to help you, as it gives more structure to the back seat cushions kzfaq.info/get/bejne/os2ijc9-rZ6yZWg.html Good luck with your project.

Thank you for your comment. I use The Foam Store, which I believe is a franchise here in the US for all my foam purchases. I found moving from the UK to Houston, I got frustrated looking for the types of foam I had used at home. I decided to for the sake of my videos keep it simple and not go into the large varieties of foams available. I have viewers from all over the world, and their foams might be labeled differently.

Thank you for your feedback. Yes, as a general rule. You will find that the quality of the fabric and furniture is usually better. Cheaper furniture only has the outer cover over the cushions, which means the integrity of the dacron will eventually degrade and tear apart due to the friction of the fabric against the danron

I personally have always tried to keep the quality of my work high, no matter the project. That's how I get more projects to film, for all of you to watch and learn from.

@@beinspired1487, your welcome. It is over 100 year old Stickley rocker with a loose cushion my Grandmother in the mid century reupholstered in stark white mid century style fabric. She was one who enjoyed the nicer things in life, so makes sense higher quality re-upholstering. Trouble is due to circumstances out of my control, was soiled and despite all my efforts, not coming out. Shame, as no one ever sat in it (probably because so low to the floor). Even got to the under cover, thankfully not to the Dacron, foam is in fantastic shape, however did sun each side for a day. Mr. Stickley design intent was the craft and rustic, therefore, Modern fabric was really the wrong choice. Been about three, four months and still haven't found a suitable fabric for the chair.

@@beinspired1487, agree, best to high quality so lasts a long time and enjoyable. Thought had a grey zipper for the trouser I am tailoring, have other colors, though be the wrong choice and bother me, so waiting for a proper grey to come in the post. Good thing I am Autistic so don't have clients. LOL

@@adrielrowley I have OCD tendencies, so often have to remind myself not to overthink some projects. Sometimes, I take a day or two just working out how I shall get the best results out of the fabric I have been given. I do have a video on how to make a boxed cushion, which might be of help to you. Good luck with your project.

Thank you. I suggest asking your family and friends, or going on Nextdoor/Facebook for your town and asking people in the community whom they use for sewing or upholstery needs. I'm in Houston and do not advertise what I do, the best advertisement is often word of mouth. Look up local upholsterers or sewing services and read the reviews, if there are no personal recommendations. Good luck finding someone for your project

Thank you for your question. I usually use the 1" dacron to wrap cushions with as it fills out any problems with the old cushion and new cover. I would suggest putting a muslin/curtain lining cover over the sewn dacron as it does help the dacron last much longer. I used to wait till my husband had left for working trips abroad so I could get the projects I wanted done without any interference. Good luck with your project.

I hope it was helpful. Good luck with your project

Thank you for the question. I use the 2cm/1" thick Dacron for my projects as it gives the most resistance and hides most imperfections. If I have to go much thinner I will double up on the Dacron if needed. Good luck with your project.

Thank you for your feedback on the video. The dacron I use to wrap the seat cushions and to cover projects is usually 3/4"/2cm thick as it gives enough resistance and makes seat covers look plump and inviting to sit on. I sometimes use the thinner quilting batting for the area that only needs a little filler here and there. I hope this is helpful and good luck with your projects.

@@beinspired1487 Thank you so much for your prompt reply! I have not found anywhere to buy some locally ( Northern Scotland) so I have been looking on line and it gives a weight per metre rather than a thickness. Now that I know what thickness to look for, I may wait until I can actually see and measure it.

@@susiep6190 I lived in Aberdeen for a couple of years and seem to remember having to order my materials then. I certainly remeber having to ordering materials when I first stared out in this business when I lived in the south of England. I would go for a mid weight and if needed double it over. You can later order the heavier weight, I just find it easier to make the depth up as it doesn't split very easily if you get the deeper dacron and want to make it thinner.

@@beinspired1487 That’s where I live! I think I will order a couple of metres initially and try one cushion to see how it works. Thanks again!

@@susiep6190 I lived in Rose Cottage toward at the top of the hilll by the football stadium, also in a flat near Tesco and Union Street as well as another place which I can not remember off hand. I really enjoyed living there as you could walk everywhere and not need a car. Winters were a bit cold for me as I was used to the tropical weather.

Thank you for your comment and question. I prefer to use the 1-inch thick Dacron. Most fabric/craft stores should keep a variety of Dacron and a limited range of foam. The Foam Store is my go-to place of choice to buy foam as they will cut it to size and shape if I send them a template. I did have a lady on this thread say she had ordered hers online and was pleased with what she was sent. Good luck with your project.

Thank you for the question. This method will work just fine and I also have this other video which might also be of help to you. kzfaq.info/get/bejne/quBpaJOCrLS8fGg.html You can use staples to close the dacron around the foam. I just feel it is the lazy person's way (in the industry) and it is really annoying if you have to take them out to replace the foam insert underneath. As it is for an outside project you really need to think about the staples rusting and leaching the colour through the fabric. This is your project and your way of making them and either way of sewing or stapling will work, it is after all the foundation, and will not be inspected by others. Good luck with your project.

@@beinspired1487 thank you! ❤️

Here in the US from The Foam Store - I think there might be outlets all over the country. I just send an order in with the sizes and density required then it is cut to the size or shape (if I post a pattern to them) and I pick it up a few days later. Good luck with your project

Thank you for your comment. I have used this method, but getting the plastic out afterwards is not that easy. Although for patio furniture it is a good idea as it helps prevent the foam from going funky from the rain and pollen. I do offer to make interior covers out of cotton to go over the foam, this helps the cushions slide in easily. The cotton cover is 2cm/1" larger on all dimensions (as this keeps the cushion together and the exterior cover is still tight over the interior foam) than the outer cover. I hand sew them shut. This is extra and many people do not bother with them. Most people work with a budget. I hope this is of use to you and good luck with your projects.

Thank you, good luck with your project.

Thank you for your question. I find that once the foams are put together it seems to not have too much of an odor. Then when the dacron is wrapped around and the cover on it really isn't a problem. In general, with a well-ventilated area, it dissipates quite quickly. I work with it quite often and I am probably quite used to the smell, but my kids don't comment on it when coming into the house. You could try using a mask and see if that helps. Good luck with your project.

@@beinspired1487 Thank you very much! Happy Holidays!

@@ginnialveymusicstudio843 Not a problem, I hope you have a great New Year.

@@beinspired1487 Thank you!

I shall have that video put together in March for you. Have found a project that can incorporate them.

I am working on some kind of overhead boom or stand so I can get really good shots. I have been watching sewing shows on TV, to get some idea as to how this might be achieved. As this needs to be adjustable and then I could have two or three cameras working. This would really make a difference in the production and quality of the videos.

Good question. I would advise you to glue it as it holds the foams together. When I first started out, we didn't glue them together although we did wrap them as I show you in the video. Sometimes the foams would slip against each other as we were folding them into their covers and then they would look a little off along the edges. The glue just helps to stabilize them when being manhandled into place. The 3M spray glue is the best one for the job, although I have used other ones. It doesn't set up straight away, it is the combination of the whole process that keeps everything together. The wrap just helps the foam to slide into place a little better than just the foam. There is often too much friction between some fabrics and the foam. It can be quite a workout. Good luck with your project.

No, I am still quite new to this and am becoming quite self-critical. I am refilming a little of the cushions again today with a makeshift boom and will edit it into the existing film later today. You will be able to see how well I do with the new and obviously footage. I will be pleased to hear your feedback once it is uploaded.

I had planned to do a basic how to use your machine for beginners. I have been thinking back on how often I had to teach my students this, so they got the best results for their project.

Thank you for your feedback and the questions. I would use the same materials if you are replacing them I have a video on "Making an L or T Cushion - Professional Tips and Tutorial for all Levels" kzfaq.info/get/bejne/Z6p4e9KJnbGpiJc.html. This shows you how to construct these cushions. If you have The Foam Store or equivalent near you they will cut all the pieces to size according to the parts list you need. I send the shapes to them that I require and they cut them for me, or else I use an electric carving knife to cut my foam when needed. Good luck with your projects.

Thank you for your feedback. I am so very sorry to hear of your son's passing. I would be heart broken to lose one of my children. As to dogs that were strays, I have one that I have had to really work hard with as she was a total mess when she was left on my door step. The other thinks she is the diggingest do and the garden I have no problem with, my sofa she has trashed and for some reason really likes the cotton stuffing in the seats. They have both had turns in shredding my bedding - but they do keep me warm at night. Dogs are like children you have to keep an eye on them. As to the foam you will need to measure you seat cushions, front to back, side to side and then the height. Look up for a local Foam Store that will take orders and cut the foam for you, as they will have access to the various deinsities of foam. If you need help with working out your order let me know the dimentions for your seats and I will help you.

@@beinspired1487 Thank you so very much for offering your advice .. Yes dogs are so much like children . They are getting better . One day at a time 🤣. I will call tomorrow as soon as I can find a store to offer the foam . Again Thank you ! 💕

Thank you for your feedback, it is much appreciated. My suggestion for replacement seat cushions is a the center of the cushion is an extra firm foam sandwiched between layers of 1" super-soft foam on either side. As for replacing the foam on dining chairs and benches, I use the extra firm foam for the base with a layer of 1" super soft on top. Remember the dacron as that smoothes everything out. My clients are really pleased with this combination. Good luck with your projects.

@@beinspired1487 Thank you so much for the reply.

@@dnel7203 Not a problem. It is nice to be asked questions as I am sure I do not cover everything in one video.

@@beinspired1487 I've been wanting to fix two chairs forever & I finally pulled the trigger thanks to you. They're really good quality but the foam is shot. I'm even going to recover them😍

@@dnel7203 Well done you. Sometimes we just need to find the confidence to try new projects. I know I do. Please let me know how you get on. It will be nice to know if my video tuition is comparable to in class. I have various videos on making up seat cushion covers .

Thank you for your question. If there is leather on both sides of the cushion then no. If there is only one side of the cushion done in leather and velcro on the underside to keep the cushion in place, then yes. You only need to do the top side of the foam seat cushion with the softer foam and increase the harder foam by 2cm/1" to compensate for the missing layer. I hope this makes sense. Good luck with your project.

Thank you for your question. Having just watched the video, I think you are asking about the fabric around the interir springs base. I am not quite sure what they call that as it has been many years since I've had to use it and what they call it here in the states is sometimes different from other countries. I would suggest you use a calico/plain cotton to sew onto an original spring base if you can not find something similar. Using materials that you have available to you for most repairs as long as it is a similar weigh are perfect for most projects. The fabric looks more flimsy than is really was, having just worn through in areas giving it a more delicate look. Good luck with your projects.

Thank you for your question. I am sorry to say that you might find replacing the seat cushions with better-quality foam as well as Dacron, or just adding an extra layer of the Dacron to the existing ones will do the trick. Unfortunately, the price paid for new furniture doesn't reflect the quality of foam they use for the seating. I make new seat cushions for new furniture more often than I like to admit. Try the extra wrap on one seat cushion and see what you think before doing them all, although you can take the wrap off and reuse it on new foam if required. Good luck with your troubleshooting.

Thank you for your question. I am located just north of Houston, Texas. I work alone on projects as I no longer work full-time or have a company. I do this to show people how to do the work so they get a nice finished look when their projects are completed. I would suggest either going back to where you purchased the bench and asking them to sort the problem out or ordering a better-quality foam from your local Foam Store, I think they are a franchise or an upholstery business close to you and take your seat cushion into them they can help you.

Thank you for your question. I order the foam I use from my local Foam Store, which I believe is a franchise as I have seen adverts for them in various cities throughout America. I advise people to order from a company that deals with foam rather than picking it up at your local craft shop as it is usually overpriced for the quality you are paying for. I did have a lady say she ordered hers online, so Google for suppliers and see what comes up, or even visit your local upholsterers, they might be able to help as they will be local to you. Good luck with your project.

Thank you for your question. The price of the foam is about the same, so no huge savings or expenditures there. I do it this way as the extra firm foam takes a while to break down and soften up. The supersoft gives a little cushioning and the illusion of giving to the new seat cushion. And so far the cushions I have made like this over the past 6 or 7 years have not been complained about or upgraded. I used to make them in medium-density foam and wrap the dacron around them and would find that clients would want new seat cushions a lot earlier. Although I like earning money I do really prefer giving Value for money. Good luck with your projects.

@@beinspired1487 You are amazingly kind! Thank you ❤

Thank you for the question. The thicker piece of foam in the center is high-density/extra firm foam and the thinner one on each side is low-density/super soft foam. I am sure there are numbers that go with them, but those are the labels I have been given in the UK and over here in the US. I hope that helps. Good luck with your project.

Thank you for your question. I used to do my cushions in the medium density and found that the foam tended to give after a while so swapped for the firmer foam with the softer on either side if you can flip the cushions, otherwise just on the one side of the seat cushion if it can only be used one way. My ladies and gents seem to prefer the firmness of their new seat cushions. The softer foam, along with the dacron just makes them feel like there is a little give as you sit down. The seat cushions seem to last a little longer too. As the foam is cellular in its makeup the cell walls eventually breakdown and the foam loses its durability and will need to be replaced at some point I hope this answers your question and good luck with your projects.

Thank you for your question. I order my foam from The Foam Store here in Houston, I believe they are part of a franchise so there should be more of them throughout the States. Otherwise, you will have to look up a local company close to you that can offer more variety than a craft store can. As for the depth of the cushions, if it is a double-sided cushion then I would put in a 3 1/2" center of extra firm/high-density foam with a layer of 1" super soft/low-density foam on either side as shown in the video. If the cushion can only be used one way then I would advise you to use 4" extra firm/high-density with a layer of 1" super soft/low-density foam on top, but still wrap the dacron all the way around the seat cushion as shown in the video. Good luck with your project.

Thank you so much! Is the dacron 1 inch thickness also?

@@charlottegasperlin3992 I prefer to use the 1" thick Dacron as it is more forgiving. If there is a problem with lining up the foam sides or if the original cover has stretched a bit the dacron will fill out and smooth the edges a bit better.

To be honest, I invariably don't wash the covers I put on, mainly because they are given to me by the client and so if I wash them and I damage them then I have a problem on my hands. For newly cut fabric I don't wash them either as it takes the newness out of the fabric and people might not like that either. I will however ask my clients to wash the dropcloths if that is their choice of fabric for a project. Dropcloths do shrink up quite a bit. I do however suggest that when you do wash seat cushions. Wash them and let them spin out, then put them back on the seat/back cushion and let them dry overnight, before putting them on the chair or sofa. Place them on the front border so that the zipper and two sides get dry. The front border can dry once the cushion is back in place. I have been known to wash fabric very occasionally and on one of my remake videos on here I did actually need to do just that. Use your own judgment, although if you are using old covers and they belong to you then wash them.

@@beinspired1487 I agree.... I'm using "Drop Cloth" for my material... I have to share with you something I did and it came out Fantastic... On the Big RV I'm refurbishing... I wanted to match the Curtains with the Fabric... but couldn't find the right shade of Turquoise that I had custom made for the exterior of the RV (YES, I had painted the exterior of the Vintage Travel Trailer, a true 1950s Turquoise...) Sooooo I thought, well, I'm using a Latex House Paint... I will dilute it, 20/80 (20% latex paint to 80% water).... and put the Cotton Cloth which was Tea Towels in the solution... left it in for about 15 min. then rinsed it really good with clear water... hung it out to dry on the fence, (do I sound country or what?) This was a sample piece. After it dried really good... I washed it in the machine, put a lot of softner. in.. and it turned out BEAUTIFUL... Perfect color match, and it was soft to the touch! This is really good with the Drop Cloth after I Bleach them first to make them white, then dye them with the house paint.... Tea Towels (double cotton gauze), they're cheap, and make beautiful little curtains.

@@judichristopher4604 That is a really good idea for the dyeing of the fabric. I have seen people paint their fabric and it tends to go rock hard and is most upleasant. I wouldn't have thought to use the latex paint over here, although the water to paint ratio and the fabric softeners would certainly make a big difference to the finished fabric. Light tea towels and table cloths make lovely curtains and are a good way to repurpose fabrics. Your projects sound fun

@@beinspired1487 It is... and the fact that I could match the color is exciting... and cheaper.

@@judichristopher4604 I am going to suggest that to one of my clients who is trying to match up some fabric that she has ordered to some drop cloths she is going to dye. She could use a tester pot size of paint as they could match the colour at the DIY store. I think, you having written about it on here, might inspire other people to have a go at making their own fabrics.

Thank you for your question. Dacron is used as a filler and smooths out most imperfections there might be on a chair, seat/back cushion, or chair seat. It puffs out the cover a little making the chair look more inviting and comfortable. Sometimes I am only replacing the seat cushion and because the older cover might have stretched I can shred some Dacron or use Polifil to fill out any corners. You will find putting the cover on a lot easier with a Dacron wrap as some fabrics have fire retardancy sprayed on them creating more friction with uncovered foam, it also holds the foam together when manipulating it into the cover. I use it on the arms and back of chairs when I am re-upholstering them too. I hope this answers your question, good luck with your project

@@beinspired1487 thank you so much ! all the best!

@@filitsaroca2436 Thank you

Thank you for your question. I usually get The Foam Store to cut the foam to order, they are kind enough to accept templates for shaped projects. If I am cutting foam I will use an electric carving knife, although a serrated bread knife will work just as well. Just keep the knife blade at right angles to the line you are following. Good luck with your project

Thank you for the question. I get mine from The foam store, which I think is a franchise here in the US. I am sure there must be something similar elsewhere. They just deal with foam and will cut it to size or shape (if you send a template) for you. I suggest doing s search and see what is close to you. Personally, I do not recommend buying from a craft store as the foam is often overpriced and they do not have the same variety available. Good luck with your search and project.