Replacing Audi A3 coolant temperature sensor. P0116 P2181
Пікірлер: 23
@gootballe5836 ай бұрын
That's a brilliant video. All the salient info including part number. Clearly and concisely explained. Well filmed. Subscription well earned sir. Keep up the great work
@caymanfrederick11 ай бұрын
Thanks dude! Just what I was looking for
@kylegeorge2119Ай бұрын
Thank you 🙏
@FitAndWellness11 ай бұрын
Thanks 🙏
@lydiap51534 ай бұрын
Thank you
@zorbcck7 ай бұрын
did this fix your issue?
@Mr_Fix_It7 ай бұрын
Yes
@brandonwilson4407Ай бұрын
So my Audi is reading code p2185 will replacing this fix it?
@poodle__21 күн бұрын
do you need to put the o ring on it? i replaced mine but i didn’t put the o ring it came with
@Mr_Fix_It20 күн бұрын
@@poodle__ You should always replace the O rings/gaskets when replacing any parts. It is a cheap replacement that can save you from catastrophic failures or leaks down the line and having to redo your work.
@Runner222 ай бұрын
hey I have a question, I have 2017 Audi a4 I’m getting code p2556 but my car is running good not overheating and the temp gauge is working fine. I change that sensor but I’m still getting that same code. Could it be the other sensor on the engine?
@Mr_Fix_It2 ай бұрын
Yes. I made the same mistake. I believe both sensors are the same so if you have the old one just replace the second one with the one you just took off.
@DaisyMiMami2 ай бұрын
Where is the other sensor located ?
@renzoplays93327 ай бұрын
No codes for me but the temp reading gauge stuck at one light bar maybe same issue?
@renzoplays93327 ай бұрын
Fyi i have a cheap fault code reader so might not read the codes properly
@avivinesh4937 ай бұрын
I have the same problem. Temp reader going down and back to normal
@renzoplays93327 ай бұрын
@@avivinesh493 mine just stays at cold doesn’t move around
@Mr_Fix_It7 ай бұрын
There’s 2 sensors. So you have to make sure you replace the right one. Or you can just replace both. I believe the other sensor is located on or near the thermostat housing.
@Mr_Fix_It7 ай бұрын
Also I highly recommend you’re using OEM parts because if you don’t it might not read correctly and still cause issues.
@afifhasbullah71352 ай бұрын
My A3 8V was having the coolant low level warning. But upon checking coolant level was normal. Does this gonna solve my issue?
@Mr_Fix_It2 ай бұрын
Yes, there are 2 sensors and they both look the same. Make sure to test them both and you’re replacing the correct one.