roadkill guys actually hate rust and when they want it gone i get the call. this time it was the red duster which needed a new floor pan and it would be my first time doing floors on an A body
Пікірлер: 145
@BillyJoeJimBob285 ай бұрын
YeeHaw!! Rockin & Rollin in the Rusty Duster wif brandy new floors. Atta boy Chris! Plus the birds were singin while the tires were Smokin! 😂 😎👍
@drew77675 ай бұрын
I can watch you do metal work over and over. you have taught us a ton. appreciate it, don’t ever think we are bored of it always learning something from it
@jerry23brown5 ай бұрын
Dang you made me feel old when you said I wish I was old enough to have watched day’s of thunder when it was in theaters lol I remember I was 10 years old I can still remember going to the movies and watching .
@lonniem97285 ай бұрын
Same
@georgekaritzis23745 ай бұрын
Derek... chillest geezer on utube
@marcusa80075 ай бұрын
There is absolutely nothing more labor intensive as major rust repair, love youre channel, every panel replacement video, i learn something new
@robertmungo54285 ай бұрын
Awesome work on the Roadkill Duster. Love the Charger medal donated to the repair!
@juice19995 ай бұрын
I tune in for you Chris and I love Derick (he is 1975) but the real star is Bolt lol Keep up the good work !
@chrisolson9685 ай бұрын
If I had 1.25% of the skill he has, I would be happy. Always impressed! Cool guy.
@STAY-GOLD-VINYL5 ай бұрын
Dude just get out there and give it a go. You got this
@mightymikethebear5 ай бұрын
Skills are developed with a lot of practice. Chris B. has had many years of practice.
@garyballinger73725 ай бұрын
Love your videos. You mopar guys are a special breed.
@sadiejustin5 ай бұрын
20:15 the wizz wheel sped up is the air guitar solo from the OG "Bill and Ted's Excellent Adventure"! 😂
@Mark-vd8oi5 ай бұрын
ALL YOUR CARS N ROAD KILLS CARS N TRUCKS R ALWAYS KOOL. THANKS FOR ALL THE GREAT CONTENT.
@travelingtech32515 ай бұрын
Great to see another metal work / panel replacement video again from Chris
@sykwookiee5 ай бұрын
To capture a street sign in the wild...1) use your truck 2)back up truck, aligning the hitch with signpost 3) reverse until sign touches the ground 4) remove sign from post 5) haul ass before Johnny law gets your ass 6) you're welcome....
@jmuduke995 ай бұрын
Always impressed with your work, Chris!
@kendrataylor73215 ай бұрын
Absolutely love the show, keep going bro . I gave up trying to find the car I've always wanted. I've been looking hard for a G- body car for about a year. Not much luck. Keep building em man , All of your shows are awesome.
@g.o.b.25585 ай бұрын
Dang, only a year. You give up way too easily... It took me over 10 to get my Charger, and it will probably take me another 5+ years to get it where I want it to be...
@kendrataylor73215 ай бұрын
Yeah, my dream car . I've got 2 and I've spent 12 or 13 years looking for them and unfortunately I had to realize that it just wasn't going to happen. So I've spent a year now looking for a G-body car , now I found a couple but there were total garbage. So we'll see what happens there. My dream cars which are 2 are a duster or a Nova. I've spent quite a while looking for either one, 12 or 13 years man , it's been nuts. So , now I figured I'd cut my losses and try to get a G-Body car . It's been a year this month looking, I never thought that finding one of them would be this hard .
@philb3865 ай бұрын
Man your neighbours must love you. Nothing like a smoke run to meet and greet the neighbourhood
@Cyberdinemechatron5 ай бұрын
Finally some new content, thanks Chris!
@metalbeast835 ай бұрын
I remember going to see Days of Thunder when it came out as a little kid
@svenwallmark45715 ай бұрын
like your content.the best.
@martind7015 ай бұрын
You are very talented Chris.
@kaimihedemark83945 ай бұрын
It is easy following your videos, you make excellent content and you teach a lot as you work. Great job buddy. Aloha 🤙🏽
@stevejones66475 ай бұрын
You have the best intro of any car based yt channel by a mile. Love that you beat on your cars
@2koolchris2915 ай бұрын
Chris birdsong, master of mopar. Can turn a rusty turd into a respectable machine. I always love the work you do, very good work. Hope to one day do quality work like you.
@daveb50165 ай бұрын
Great work as per usual.
@timothyballinger62804 ай бұрын
Well I was old enough to watch Days of Thunder at the drive inn which isn't there anymore! Man I'm old lol!
@stewartkarol7575 ай бұрын
Nice repair on the red ruster👍
@Greg383BB5 ай бұрын
Chris I had no idea all of the work involved change floors wow! Great job
@MikeJBlues5 ай бұрын
Superb job, sweet Duster
@mightymikethebear5 ай бұрын
Your videos may inspire others to try to repair classic cars.
@anthonyshelton67865 ай бұрын
fun little watch nice work on making floor pan install look fun and the full on blues Brothers moment
@bigsexymuthashutyomouth25465 ай бұрын
Just imagine what Chris could do with a large shop and fancy tools like they have on TV shows! The only guy that I would want to work on my Mopar other than Chris would be Mark at Graveyard Cars!!!
@wjb1115 ай бұрын
I never miss a new video!
@brettemerich32375 ай бұрын
Chris you probably had a time frame to have the floor done. You are a great metal worker and know how to get it done the fastest with quality. I remember that you have done work roadkill before. You took one car and put wheel tubs back in put the rear seat frame back in. Fryburver knows your work. Have good day
@perryanderson23765 ай бұрын
Chris your th man when it comes to panels
@scottsmith68465 ай бұрын
Hey Chris thank you for the video and great job 👍
@dusterowner99785 ай бұрын
man you do great work . Wish you were in in topeka to work on my 71 Duster 👍👍👍👍👍
@donpatillo36005 ай бұрын
Hello 😊, en français le titre du film c'est; jour de tonnerre . Bon travail sur la voiture 👍.
@mikebrown80655 ай бұрын
At least it didn't fall short of a typical "Roadkill" moment and end up on the side of the road 😂😂😂. Even if it was only out of gas! 😂😂 Great video!! Thanks for sharing 👍 😎🇺🇲🇺🇲🇺🇲🇺🇲
@AmateurHourRestorations5 ай бұрын
Another great video! Keep it up!
@TheUser665 ай бұрын
damn, its nice to see a job this good!
@shanewright69585 ай бұрын
Looking good 👍👍
@chadvetter81905 ай бұрын
Nice, you make it look easy.
@mr_paw_t5 ай бұрын
as always, good job.
@Rockriverboarder5 ай бұрын
Amazing work as always. They really need to get some sort of finish on the roof or that’ll be fill of pinholes soon. Be a shame to wreck that roof skin.
@tbd-15 ай бұрын
Mopar only made 1 floor pan for A Body cars. They too cut a hole in the floor for the shifter hump and it wasn't their proudest work. Mine was held in more by the seam sealer than by any welds they applied and the cutout was rough as hell.
@1080sucks5 ай бұрын
Nice work. Both the floor and "Testing" after
@rodypma60515 ай бұрын
Great job Chris, now go let the smoke outta them tires!
@egodeathplease5 ай бұрын
Roadkill car. Right on. Means it has a new gearstar 4l80, blueprint engine, QA1 suspension, Mosier axles and pawns like yourself to do the work. So "Fry n burger?" can show up with his timing light n be the hero. Your like a mechanic Hollywood stunt man. 😂
@lt.columbo59195 ай бұрын
Yes...Roadkill and many channels are just front men for big corporations who want to "sell the dream" to working class shlubs who CAN'T AFFORD all the whizzy, expensive parts they are being convinced that they need.
@viktorhardindyrvold42345 ай бұрын
Like he says himself: way too nice parts on way to crappy cars ...and I'm here for it! At least RK cars have character!
@joebacarella28295 ай бұрын
Chris I can`t believe you pulled out the interior again to paint it red, it`s getting carpet right. I thought poor Derik flew out of the car when you did the burnout, nope camera man, the floor looks great.
@raywagner80165 ай бұрын
Man, where I'm from, those are good floors. BTW, Johnny, AJ & Sue said "Hi".
@auteurfiddler87065 ай бұрын
The Road Kill guys had the best video about tuning a Holley carb. It was on a very old Ford pickup truck as I recall. They used a fuel mixture gauge and changed primary jets, secondary jets, accelerator pump cams, squirters, etc. I may be forgetting a few. Secondary springs, maybe. There is a scene where they lurch forward in the truck but forgot the tailgate was open and the jet kit open and had to spend a bit of time digging them out of the dust.
@EliTheMechanic5 ай бұрын
Trying to watch this in class is hard I’ve been yelled at twice already
@edvisme5 ай бұрын
Bet those rusted out fronts are from not just the windshield seal but the windshield wiper arm seals.
@marklottero53455 ай бұрын
Love a car like that, nice but not too nice to have fun with
@JustMoparJoe5 ай бұрын
Livin the dream
@TrashcanGarage5 ай бұрын
Fun to watch. More fun than actually replacing floorboards. BTW - whose weld through primer did you use on this?
@roycervantes13415 ай бұрын
Yeee Yeee 🙂
@Guns_N_Gears5 ай бұрын
Flex seal the new INEXPENSIVE alternative to DynoMat!!!!😅 I kinda had to chuckle, as soon as you said cheapAss, a commercial came on😂
@sadiejustin5 ай бұрын
Derek llokin like the Geico caveman in the passenger's seat! 😂
@valricogarcia5 ай бұрын
With all those water bottles, you could sell genuine Freiburger and Dulcich backwash to Roadkill fanatics on ebay.
@jamesdamron20655 ай бұрын
Lol I remember days of thunder,,i was living in Daytona at that time it came out,,& i actually used to mow the grass at the track & i worked at a shell station next to the track & we'd watch the twin 125 races from the roof of the station!!😂😂
@jaysho54615 ай бұрын
You should start selling those water bottles as Roadkill Memorabilia. Hell, maybe some weirdo will even use it to clone Freiburger.
@marionarthur66295 ай бұрын
The days of thunder ride at Kings Island was pretty awesome
@1gatomon5 ай бұрын
LOL Great job.
@jamesmiller15625 ай бұрын
Chris If you ever come to Washington with your modified I will wrench for free for the weekend
@sprintcarsandguitars9595 ай бұрын
desert driver.
@SuperSportstudio5 ай бұрын
👍 ✌ Nice
@tims72demon5 ай бұрын
Saw something that looked really handy & useful. What is that flat steel bar you use to cut between the sheet metal ? Is that something you made or something you can buy ? I’m redoing my 72 Demon and that looks better than what I’m trying. Good video, & great work. 👍
@josephwakefield65895 ай бұрын
Nice
@UnfinishedProjectDartSport5 ай бұрын
I like it!! Now paint it blue.
@user-KrackerJack5 ай бұрын
👍🏼
@DaPenceman5 ай бұрын
Time for a 440 powered Delorean?
@garytallard23215 ай бұрын
Pro level 10
@messylaura5 ай бұрын
those cheap 55amp Chinese plasma cutters are excellent for cutting out the floors,
@jdfmfb035 ай бұрын
Wah Wah Wah
@bluescelt53175 ай бұрын
Chris, I thought an A Body with a magnum w/ stock power steering interfered with the battery tray.
@gilbert6325 ай бұрын
? Why not go in from the passenger side ? Take that pop out window ? Just curious
@KennethDevine-hg4cbАй бұрын
It's a lot easier to get road signs if you take a battery operated sawzall with you you just cut the post off
@cdoublejj5 ай бұрын
what about the harbor freight spot welder with mondo exdendo tongs?
@steveash98315 ай бұрын
I like to use a burr bit in a drill on spot welds. The bit lasts forever. However, it does throw a million tiny steel slivers everywhere. Umm, nevermind.
@anunnakielohim27275 ай бұрын
After seeing you do a frame graft on a charger frame I don't know whether to call you Dr. Dodge or Mr.Moper but you need to get with your neighbors and rename a local street "Burnout Blvd." Keep a '68 Charger on the ready in case I win the lotto!!!
@roywhitman71095 ай бұрын
Like going to sheet metal school! 👍
@lennardlennard4145 ай бұрын
👍
@g.o.b.25585 ай бұрын
👍👍
@edberry785 ай бұрын
Dammit, Dave! lol
@MrWoodshoes5 ай бұрын
Have you ever tried a Roto Zip for the spot welds ? I sympathize with you having to deal with the weather, you really need a shop to work in !
@mightymikethebear5 ай бұрын
A dry, warm shop would actually make the work easier and may speed up the process. However, it is none of my business how Chris chooses to work.
@hansblooeyribbon42075 ай бұрын
How do you fix stripped out sheet metal screw holes? Like inside door panel or armrest screws?
@chucktaylor27725 ай бұрын
Grab a MIG and put a weld on it , replacing some metal. May need to drill to size, depending on weld nugget size.
@volvowagon705 ай бұрын
Jared at the questionable garage had to pop a window out of his duster to do his floors too.
@johngartner67105 ай бұрын
Whenever I see an accelerator arm froze like that it's the check valve is stuck under the nozzles
@motoroney5 ай бұрын
how long does it take to do a job like this?
@dave36575 ай бұрын
I wonder if people who replace the pans might not remove the steering wheel and front windshield, and put the pan in from the front? 🤷🏻♂️
@Chevchild5 ай бұрын
😊
@russellregnier58115 ай бұрын
I noticed you didn't use the copper welding primer. Is it not available any more
@junkerup5 ай бұрын
I bought wrong box
@petecrabtree67345 ай бұрын
🦅🇺🇸💪😎👍
@danpatterson80095 ай бұрын
General Dee Lorean?
@NowonBeauty5 ай бұрын
What happened to Black Mamba??? Does anyone know?
@steveash98315 ай бұрын
Wow! A '70 Duster that is not triple crap green!
@440Nichole5 ай бұрын
Your buddies fried burger and dullchise left you with another clapped out mopar to fix 😂
@monsterkxf5 ай бұрын
I hope you threw all his water bottles and junk back on the floor behind the seats 😂😂
@TheGforcead5 ай бұрын
What Is up my brother and fellow "run what ya brung" guy, one question, does the driver's side rear have all anti-theft lug bolts or are my KZfaq eyes deceiving me? Little known fact, in the Original Gravedigger the driver's seat was school bus bench seat!
@ultimatejay5 ай бұрын
Wouldn't it be easier to put the floor in from the passenger side so you don't have the steering wheel in the way?
@Robrt32Ай бұрын
I thought he gave it back to you? Or is that not the 1? I’m bad with colors but I thought it was that color and about that rusty