Wow 53 minutes of fun filled Capacitor info This ought to really get the "Replace the capacitors and it fixes everything community" Really going!

A great refresher but I am sure newbies will really be able to use this. This kind of video is excellent for people who have never worked on electronics.

Great video Bryan. Never hurts to have a big collection of terminal strips to securely attach replacement capacitors to a chassis. Never ceases to amaze me how many times I have seen new stuff flopping around with electrical tape wrapped around the soldered connections.

A wealth of knowledge earned over many years - Thank you for sharing

Very thorough and well done. I know this took a long time to make, but it should help many newbies with capacitor basics for many years to come.

After reading through most of the qeustions posted I get the idea that a lot of people do not listen fully to what they are being told. Right now I have got that off my chest I would like to thank you for a great video showing how to go about restoring equipment that would other wise likley end up has scrap. I started repairing radio/electrical gear when I was able to handle a soldering iron. (The type that had to be heated in a gas burner or on the red embers of an open fire) A long time ago. My first test aids were sight, smell and touch. If I could see that a component was faulty I would replace it with a known good one of the same type, so I had to learn the colour codes for resistors and capacitors at an early age. Reading from library books taught me a lot. I did silver soldering at school as a teenager in metalwork. That was very useful for me when I went on to take take exams as a "Boy Soldier" for education class 1 cert. Best regards de John-G0WXU.

Thank you so much for creating this video. I started restoring a Bogen RP-235 last month and you covered about half a dozen questions I had just by walking through this process.

Another classic video by a true legend in his field.

I like how you layed out the schematic for what you were doing. - you've unstuffed the mysteries of can caps for me - and revealed the simplicity of terminal strips. THANKS!

I looked around for a day and a half trying to find the accurate information I needed to replace some caps on a old Magnavox amp. I found all the info here that I needed many thanks for putting all your expertise on video.

This was excellent Bryan. I'm sure it cleared a lot up for many beginners as well as some older techs. Thanks, Carl

Thank you for all the details you go into. This is a great educational video for the next generation of Vintage Electronics Repair hobbyist!!!

That was perfect! I now feel I can finally get into some of these old record players and radios I have sitting around. You cleared up so many questions in this excellent, concise video. Thank you!

Thank you so much. You taught me more in the first nine minuets of you video than watching hours of video has. i really enjoyed your training material and I would love to learn from you in a video school situation. You a very clear and concise in your information and make me feel as if I actually can learn electronics without the math. Thank you again. I joined for the first time, just to leave a comment for you because you impressed me so much. Thank you for sharing. Heathkit SB220 Capacitor replacement.

Thank you for the last part of the video where you mention how to mount those replacement caps for the wax two cap tubes, I was trying to decide if I should rig up a terminal strip or just ziptie it to the clamp!

Hi, 'Thanks so much for this video. I have an old 1946 Philco radio-phonograph that I have been struggling over. I have never repaired one before. I was confounded with the "capacitors." You answered all my questions. I am listening to music right now. Thanks.

I wouldn't call this a crude video. It's quite useful for the novice hobbyist.

I like this video because I can watch it over and over again so I can refresh my memory as to the procedure of properly changing can type electrolytic caps. will you eventually show us how to properly use a multi tester to check circuits, voltage, and good or bad capacitors and resistors?

I kinda groaned when I saw the length of the video, but theres not a second wasted - chock full of capacitor goodness - a million awesome tips...

Excellent video and tutorial on replacing capacitors in old radios. Thank you!

*5* STAR tutorial on Multisectional Capacitors and what can be used to replace them. Thank you sir.

Thanks very much for going though all the effort in producing this definitive video on electrolytic capacitor replacement.

I would like to thank you for all your helpful information, in restoring antique radios.

Update. I just replaced the multi-section capacitor in a 1954 RCA AM table radio using the information in this video. I knew it was bad, but was not completely clear on how to replace it, and this video cleared things up a lot!

I always appreciate your thoroughness and clear explanations. Thank you for sharing with us.

Fantastic job. Always a pleasure to view your work and explanations. Love you editorials (rants) too!

Thanks for your direction! I had no idea what those words on the capacitor meant and how to replace it.

Thanks for covering this. Got an old Fisher console I need to tackle. Great job.

Great video. EXACTLY what I was looking for. How to replace an old multicap with several new ones. Excellent tutorial.

Glad you still making videos, they help a lot.

Excellent video. Thanks for explaining everything.

Lots of good advice in here; especially for people just starting out replacing cap cans.

Good video. I have been doing this since 1970 and I still learned some new ideas!

Very fine lesson on a key subject...Thank You!

Very clear and detailed explanations, one of the best guides on the tube! Thanks for sharing your knowledge.

Excellent explanations, just what I was looking for regarding multi-section can capacitor.

good general info on caps, thanks for uploading!

great layout and plan much appreciated

Thanks for the video. I've been missing them.

Excellent video. Thanks look forward to seeing more.

Thanks for the Video! covers allot of good points! 73!

Thank you SO much for doing this video! I really needed a tutorial on caps. I am not an expert, I am learning. This will help me alot.

Thank You, always look forward to your video .

Great advice. It's tempting for a manufacturer to cut corners by going with a cheaper cap--they're buying a million of them. For those of us buying a few, it's no problem spending a little more.

I never thought you could make an hour long tutorial on how to change a cap, but I have been proven wrong.

Excellent video. I know its 4 years old, but well worth the time to look at and learn. Thank you.

Great video! please keep them coming!One note about radial capacitors: the positive lead is longer than the negative one.Best Regards,Moshe.

That was a very helpful video for me Nice work and thanks for sharing your knowledge :)

Thank you for this video. I was looking for some answers and i found them in your tutorial.

Worth every minute, thank you.

Thanks for the great information! I will have to do this on my old Heathkit amature radio equipment that uses the old metal can capacitors. I prefer to leave them in place so the chassis looks original as viewed from the topside.

Thank you Bryan! Great teaching.

This was very helpful. I have a 1956 Realist FM tuner that had a 40/40/40 MF can and the cheapest I could find was $50 so I'll be doing your method with 3 seperate caps

Lots of information here. Well done!

Thanks for the video. I had been looking for etched in symbols on the bottom of a can capacitor and didn't even think to look at the cuts in the phenolic where the leads come through and there they were.

absolutely outstanding video. this is exactly what i needed!!! thanks!!!!!

Because modern caps are a lot smaller than the old ones with similar ratings, it's a simple matter to cut off the top of the old cap, pull out the guts, and use the can to house the replacements. The cut off top can be epoxied back on, or for a more solid sealing back up, make a plug from a wood dowel and epoxy it in place. This technique retains the original appearance, and doesn't take up any space. With a little creativity, the repaired cap can be made to look identical to its original appearance, which may be important to collectors of old gear.

Excellent video. Thanks for the tips. Learned many things. 73, YS1RS.

Very complete, well done!!

Don't always assume that a can-style multi-section capacitor has a common negative terminal. I recently re-capped an old Zenith AM/SW export set. It had a 2-section cardboard insulated can capacitor with 3 terminals on the bottom along with a insulated metal can terminal. The markings indicated it had 2 caps which were both 10 uF / 450V but there were 3 terminals on the bottom. The radio had wires & components connected to all 3 terminals as well as the insulated metal can terminal. What was the 3rd terminal used for? It turned out, that 3rd unmarked terminal was the negative terminal for one of the caps. The other cap used the insulated metal terminal for negative. So in essence, the can housed 2 independent capacitors. The part in question was a Zenith part number 22-1056C. In this same radio there was also a domino-style component with 3 colored dots (blue-red-black). What I thought was a 62 pF cap turned out to be a 62 ohm wirewound resistor. Lesson learned: Never assume what appears to be obvious.

Thank you very much for your time and help.

Thank you for the information, I'm new at this and trying to get a 1946 Stewart Warner radio to stop humming.

Very helpful. 👍 I'm restoring a 1947 Firestone radio-phono and was wondering how to replace the multi-section can capacitor. The amp works amazingly well with all the original parts, but after 75+ years since all the capacitors were made it would be good to replace them so the radio-phono can be used another 75 years.

Great video, I need all the help I can get.

Thank you for sharing your wonderful knowledge on how to replace multi-section electrolytic capacitor. I found your information very useful, especially while working on my vintage Sylvania Record Player.

You teach me a lot, thank you!

Very informative video with lots of info on multi section can capacitors. I'll definitely be watching this several times. I question how easy any future maintenance of that four cap section would be. It's seems quite cramped for space in there.

thanks for making this video!

about 7 years ago I was looking to sell a Univox 60watt head. It worked fairly well except when the volume was turned down it had a hum. I think, from watching your videos that it was likely a capacitor, perhaps a filter capacitor. It was a 3 or 4 tube unit. The guy who was buying it told me the hum meant the power transformer was bad. I think I was only asking $35. Thinking back, if it was the power transformer, how could it hum? Anyway, it went to someone who apparently wanted it bad enough to lie and I only wanted it to go to a good home. I had been using it to power my monitor. I'm a drummer.

Yes this was very helpful thanks.

Great video !!!!

I try to steer clear of negativity....unless it's electronics.

Excellent .... a lot learned ! :-)

Thank you for the information...

Good advice

really appreciate! Thank you.

would you know how to remove the amplifier out of a magnovox console stereo model pf 6354? it's a dual knob volume control and also is equipped with a eight track

Wonderful video for beginners like me.

Great video. cheers

Awesome Man

Thank you, great video.. for me being a newbie, it seems there is no way to test a capacitor while it is hooked up to other pieces of the equipment...?

Very interesting!!!! What do you do if the originals were 6 volts, and vary from 5-50 uF?

Wow. Now I can magically fix anything by changing the capacitors!

Thank you! Regards Lee.

Great video. Thanks! Last year I struggled through figuring this stuff out on my first restoration project, a Silvertone 1483. I did get it done but picked up more tips from your video. Should be easier on my next project a pair of Altec Lansing 1569a power amplifiers with EL 34's Thanks again.

Thanks, my first radio I'm going to repair has this problem.

I don't know why I am watching this. I am closer to death than starting to repair old radios again.

The working voltages of a cap can be considerably higher in the older tube and discrete transistor stuff but for modern switching power supplies like in flat TV sets, computers, and modern 2-way radios you want them to match what came out and this is due to the ESR values and the circuits designs. You go too high your can cause the circuit to become unstable and unreliable... Also it is important to pay attention to the temperature rating also and you want to match that up as well..

Once again thank you

I have a 3 part capacitor 100/300 75/300 and 50/24 I've tried to find nichicon capacitors I can't find any in those values help

hi my name is ted, i like your video a lot this is pointing me in the correct direction i am very new at this at least now i understand how capicators work with the values and voltage i thank you very much for explaining it perfectly, i do have one question for you to answer for me the can capicators do all the values need to be the same for example i have a 1941 GE radio phonograph with the audio filter can capicator the values are 30MFD 350VDC half circle 30MFD 350VDC square 15MFD 250VDC triangle and a 20MFD 25VDC with no symbol if i need to replace this do the values need to stay the same as on the original?? please let me know thanks ted

Where is your favorite place to find old tube radios.

Ty for this video....

Good sir, I was wondering if you had a source for any Singer TV schematics. I have an Singer H8 101 in need of repair, but I an unable to find documentation online.

Three wire power cord big no-no in vintage tube amps. Just a polarized two wire only. You’ll have a annoying little hum when you are done!

Thank you for sharing your brain stuff. Mr. Pete 222 as Tubalcain has done the same. He even sounds like you. Check out his stuff as he has over 600 videos about metal shop knowledge. Note his camera, mounting, movement, and other techniques as he has practiced so much. Remember the obvious: my grandchildren haven't got a clue what's in your hands. History that is. Electronics as well. I note the many spiders who shit all over the braided cloth wires that today's ribbon cable has done away with. (Like my grandfather telling about how to care for his horse before and after going to town.) MAKE MORE!

Hi, have you ever heard of Cellgrave receivers? If so do you know anythin about them and are worth savin.

Do you use heat sinks when soldering?

Thanks bro

as a cathode bypass capacitor where does the capacitor actually send the current?