Replacing Rear Fog On My WRX With Noble F1 Light

No video

Replacing Rear Fog On My WRX With Noble F1 Light

Рет қаралды 14,919

Күн бұрын

In this video I'm installing a new rear F1 Brake Light from Noble Performance. This fixes all my complaints about my current setup with a darker appearance and running light functions!
Link To The One I Have: www.importimag...
They also make them for the 11-14 wrx/sti also!
MOD LIST (Catagorized)
PERFORMANCE:
- Cobb Accesport
- Mishimoto Cold Air Intake
- Deatschworks 300c Fuel Pump
- Cobb Flex Fuel Kit
- Perrin TGV Deletes
- PRL EGR Delete
- Grimmspeed EBCS
- Grimmspeed FMIC
- Boomba BPV
- 1320 Catted Downpipe
- Single Exit 3" Catback
- Radium Dual Baffled Catch Cans
- Phatbotti Protune (E65)
- 372WHP/374lbft On Standard Map
- 403WHP/381lbft On Send-It Map
ENGINE BAY DRESS UP
- Perrin Fender Shrouds
- Perrin Radiator Shroud
- Perrin Pully Cover
- IBR Vacum Pump Cover
- Painted All Yellow Caps
- Custom Battery Cover
- Cobb Radiator Cap
- Superstick Dipstick
- Grimmspeed Oil Cap
SUSPENSION/TRANSMISSION/Mounts
- Brembo Brakes (Factory)
- DSS Carbon Fiber Driveshaft
- Rev9 Coilovers
- Boomba Short Shifter Plate
- Perrin Shifter Bushings
- Perrin Shifter Stop
- Perrin Front Strut Brace
- Aluminati Solid Transmission Mount
- Aluminati Solid Carrier Bushings
- Torque Solutions Pitch Stop
- DFJ Short Shifter
- Weighted Shift knob
- Titan 15mm Spacers
- Cosmis FlowFormed XT206R 18x9.5+38
- Muteki Lug Nuts
- Dunlop Sportmax 245/40/R18
EXTERIOR & AERO
- Custom Painted Tail Lights
- Custom Painted Fender Badges
- Custom Painted Rear Emblem
- Window Tint 20%
- Vortex Generator
- STI Spoiler
- Perrin Spoiler Stabilizers
- Perrin Front Plate
- S207 Rear Bumper Vents
- S209 Fender Flares
- OEM Style Front Lip
- OEM '20 STI Fog Bezels
- Bayson R Front Grill
- OEM Style Rain Guards
- OEM Style Turn Signal Mirrors
INTERIOR
- Recaro Seats (Factory)
- JDM Leather Shifter Trim
- OLM Carbon Dash Trim
- OLM Carbon Shifter Trim
- Accesport Vent Mount
- Suede Wrapped A-Pillars
- Customized OEM Shiftknob
LIGHTING
- Vland Headlights
- Diode Dynamics Tail/Turn Module
- Diode Dynamics Smart Tap Relay
- Diode Dynamics Reverse LEDs
- Diode Dynamics LED Tag Lights
- Diode Dynamics Interior LED Kit
- Red LED Strips (Under Dash/Seats)
- Noble Rear Fog / 4th Brake Light
- Alpena LED Underglow
- Alpena LED Engine Bay Lighting
OTHER
- Made Side Fender Vents Functional
- Made Rear Bumper Vents Functional
- Perrin Hella Horn Bracket
- 6 Hella Horns (2 visible, 4 hidden)
- Urethane Exhaust Hangers (Raises Stock Muffler 2" to fill gap)
- Perrin Window Vents
- Painted Shift Knob To Match Seats
- Painted Pinstripes On Carbon Dash Trim To Match Seats
- Raptor Liner On Lip Kit
- Custom Intercooler Shroud

Пікірлер: 25

@Jtruongg 3 жыл бұрын

Such a beautiful subie man! You killed it with all the DIYs!

@StreetInspired1 3 жыл бұрын

Thank you!

@kangshi12 3 жыл бұрын

i literally JUST bought the exact same color design 2mins ago after trying to see online what'd it look like. it looks good so im relaxed now 😂

@MoJoNinjaGarage 3 жыл бұрын

Car is looking good big dawg, and you picked a good light for the rear, it brings the other light mods together!

@StreetInspired1 3 жыл бұрын

Thanks man! I really like the smoked lense. It only really draws attention when it's lit up!

@trustebuddha307 6 ай бұрын

Very helpful

@samriijack 2 жыл бұрын

Bro you can make a new seal if you use this sugru with your old rubber seal in place

@jeremyjackson8643 Жыл бұрын

Is there any way around that 5 second delay in between braking? Thanks

@beeeri8979 2 жыл бұрын

Where can I find a dynamic harness??

@Clay1jz 3 жыл бұрын

Looks good man

@WRXJVCE 3 жыл бұрын

I really like ur vinyl tail light cover. Where did u find the one with the cut outs on the side of it. Every one that I’ve found is black all on the side

@StreetInspired1 3 жыл бұрын

I get asked that alot on Instagram lol these aren't vinyl. I Custom Painted them long before premium did the vinyl design. Lol Here's All 3 times I did it. kzfaq.info/get/bejne/bNyVrcp4r8XFqXk.html kzfaq.info/get/bejne/edOUaq5p3suXeWw.html kzfaq.info/get/bejne/Z9uGgL14zrHSip8.html

@rmat9023 2 ай бұрын

on ur specs list, why did u buy 9.5 wide wheels if you are still going to run 245 wheels, what the sense in that?

@StreetInspired1 2 ай бұрын

It was temporary. I ended up switching to 255

@rmat9023 2 ай бұрын

@@StreetInspired1 that's only 1 size up? couldnt you go at least 265?

@StreetInspired1 2 ай бұрын

@rmat9023 265 would probably be fine but it might Rub. I rubbed on the 255 occasionally.

@S1xsho0ter 2 жыл бұрын

Hi are you able to replace the bulb when the lights die out?

@SuzukiKid400 2 жыл бұрын

LEDs typically don’t burn out. If they do you’d have to solder in a new bulb or replace the entire lamp assembly.

@danielBarnweezy 2 жыл бұрын

How is the tape for the body kit holding up?

@StreetInspired1 2 жыл бұрын

Out of all the panels so far only one is having issues. The driver side quarter panel has a little bit of lifting. But im going to take it off and re install it with the Black 3m tape which is much stronger than they grey stuff they gave with the kit

@jamesbarnachea3390 3 жыл бұрын

those tailight vinyl from premiumauto?

@StreetInspired1 3 жыл бұрын

@RIVIMAX 3 жыл бұрын

Since when do you have that exhaust?

@StreetInspired1 3 жыл бұрын

Was waiting for someone to catch that lol. I installed it about a month ago. I was test fitting it for a company but the exhaust isn't released yet so I can't post the video or say what brand or anything just yet.

@RIVIMAX 3 жыл бұрын

@@StreetInspired1 looks like a mix of a greddy single mix with a tomei lmao