Thank you for this . I have 94 Chevy step side and sat she just would not crank and no fuel after a ton of checking on the electrical system . Was going to cut a hatch in the bed but maybe not now
@aldohernandez4332 ай бұрын
Thanks for video, I need to replace my 1993 C1500 pump as well, pump is allowing backflow when parked and makes it hard to start, gotta click that switch multiple times to prime or give it shots of starter fluid.
@bigdaddy9864 Жыл бұрын
Tanks are cheep, I would just replace the hole thing .These trucks are low presser (15 to 25 psi) you can use rubber fuel line or big metal brake line trucks after 1994, The 1995 and up (VOR-TECH) engines are 60psi and you should use hard lines " In Line Tubing Co" sell inexpensive kits for these trucks. p.s. : did you know you can put a 25 gallon tank in a long box 88-98 c/k but you can't put a 34 gallon in a short bed .I Put a 25 gal in my K1500 st/cab long box I like it more room to work under the truck cheaper to fill up too ****
@FIXANDREPAIR7 ай бұрын
That is exactly what I did. kzfaq.info/get/bejne/etaae7eqlp2saI0.htmlsi=hE12YSCIheYIUjpA
@gordeymixer54948 ай бұрын
Just finished my 91 Chevy 1500. I found it a lot easier to put the truck on on a jack stand on the rear frame.. then let the tank drop slow with a jack. The driveshaft stayed in and was helpful guiding the tank back in. Took my a day but not that hard.
@enricoderojassarson55965 ай бұрын
When using a floor jack to lower and raised the tank, put a piece of plywood on the floor jack arm to spread the tank weight and keep the tank more level
@robertmckinnon7245 Жыл бұрын
I just finished my 93 c1500 a few days ago. My truck had a double whammy, head gasket blew,and the fuel pump only had 5lbs of pressure...
@luisgarza4502 Жыл бұрын
Tks bro!👍
@SwiftyMcVeigh851 Жыл бұрын
Thanks man, were those quarter inch compression fittings for those feed and return lines? I subbed.
@HotrodShane Жыл бұрын
Appreciate bro! Return line was a 1/4 and the feed was 3/8
@jeffro221 Жыл бұрын
Nice job getting it back on the road! I'm going to be replacing the fuel pump on my '94 Chevy pickup soon also. I see your US Motor Works pump is about $71 today and the Delphi is $154 on Rockauto. Is your USMW pump still running ok? I'm leery of the low cost chinese pumps. Seems like a fair number of people online say they don't last, fail in months. But I noticed your box did say "OEM Qualty." And we know those chic-comms would not lie, right? 😁
@HotrodShane Жыл бұрын
Haha well as of right now the pump is still going strong i figured there's always that chance of getting bad parts so i just went ahead and got the cheaper one lol
@deanyanko33269 ай бұрын
I had an old ford pick up with a mechanical fuel pump $14.99 and two bolts you are smart to rig up those lines they overcharge for every thing these days so they can make the$800.00 a month payment on the new H.D. truck HA HA HA I'm driving a 95 silverado that keeps on going with over 200,000 miles those are good trucks except for the cracking frame issue . mines not there yet min'es maroon I'd like to find a hunter green one 4x4 3/4 ton. I did have a 79 bronco that was the color of your truck back in the day ..
@stevepooran22406 ай бұрын
Don’t that burn the pump out with no gas to lubricant it ?
@deanyanko33269 ай бұрын
guess I better get the strap hooked up on the ol sierra ,before the snow flies,I got a heavy hold down ratchet strap on it now .3/4 ton plow truck getting to old to be plowing with the atv. I don't want to be found like the frozen mountain man in Jeremia Johnson ha ha ..
@SULLIEDASP9 ай бұрын
Maybe better to raise the truck bed but still need to put wood blocks so the bed doesn't fall.
@HotrodShane9 ай бұрын
Yeah ill prob try the raise the bed method next go around lol