Replacing the Regulator on my Craftsman Air Compressor

Рет қаралды 15,286

Жыл бұрын

The regulator valve on my craftsman air compressor has been leaking for a long time. I am finally getting around to replacing it.
_____________________________________________
Affiliate Links --- As an Amazon Associate I earn from qualifying purchases.
AC-0007 Regulator - amzn.to/3S0vVim
Extended Tank Drain Assembly - amzn.to/3DopsJK
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting my channel so I can continue to provide you with free content each week!
_____________________________________________

Пікірлер: 34

@jamesdv9936 16 күн бұрын

Great video! Thanks for including the part number. Just ordered one.

@TheFixitShed 16 күн бұрын

Glad I could help!

@frederickneal4781 Жыл бұрын

Man you did a fantastic job! I was impressed.

@TheFixitShed Жыл бұрын

Thanks! I am glad you enjoyed it

@ChevyGuy-kx7im 2 ай бұрын

Great video, well done and very explanatory. Thank you

@TheFixitShed 2 ай бұрын

Glad you liked it!

@Blocksourcemusic Ай бұрын

Thank you sir!

@TheFixitShed Ай бұрын

You are welcome!

@steve20118 Жыл бұрын

Thanks!

@TheFixitShed Жыл бұрын

You're welcome!

@slonold3554 5 ай бұрын

Thank you sir!!!!

@TheFixitShed 5 ай бұрын

You are welcome. Glad it was helpful.

@bonfigliothomas425 2 ай бұрын

Same piece broke on mine. Can't believe that nylon gasket isn't available. My new regulator arrived today.

@TheFixitShed Ай бұрын

Hope the install went well!

@imlon2 9 ай бұрын

I know this is one thing wrong with mine. I cannot get air to stop coming out the black knob no matter how much I turn it left to right, and so much air the compressor rarely shuts off. Fingers crossed I just purchased the the regulator, hoping that fixes it.

@TheFixitShed 9 ай бұрын

I agree with you. Sounds like the regulator. Mine leaked since new, slowly, but always leaked. New one hold pressure much longer. Hope it solves your problem.

@dhansel4835 8 ай бұрын

I would like to see a pressure shut-off adjustment. My Sears compressor just wants to keep on running.

@TheFixitShed 8 ай бұрын

Does it continue to build pressure? That could be a dangerous situation. The cutoff switc could be malfuntioning. Unfortunately, I don't have this compressor anymore. So I cannot make another video on it.

@davephelps1593 Жыл бұрын

Its a good thing you didnt run any air tools through there or youx be maki g a video on how to rebuild them.

@JonSolow13 10 ай бұрын

Excellent instructional! I just bought a 6 hp 150 PSI Craftsman, and believe the regulator may be clogged or malfunctioning. Will the regulator you use fit? If not, any suggestions? I'm going to test it tomorrow in the am. Thanks for your time.

@TheFixitShed 10 ай бұрын

Glad you liked it!. The best thing to do is get the model number of your compressor and go on searspartsdirec.com and check and see if it is the same.

@JonSolow13 10 ай бұрын

Thanks for the info!

@camcam3087 Жыл бұрын

I’m looking at buying a used one. Same mode. Anything I should check for that comes to mind? Thanks

@TheFixitShed Жыл бұрын

There is a date code on a plate welded to the tank. Recent compressors are only designed to last 10-15 years. You also don't know how well it was maintained. Let some air out of the drain if rusty water comes out, walk away. I have purchased a new on to replace the one in the video because I know it was not well taken care of and it is 23 years old. I don't need it blowing up in my garage. I am going to make a video decommissioning the old one in the near future.

@miguelincendi7758 Жыл бұрын

Awesome video! New subscriber here!! 👍🏼This is the exact video I needed to fix my craftsman. Would you by chance know what thread size I would need for the air hose coming out of the regulator? Could you provide a link please. TIA

@TheFixitShed Жыл бұрын

Thanks! Unfortunately, I am not sure. There is an adapter that goes in between the hose and the regulator, so there probably is a standard hose size and then they use an adapter to step it down to the size needed for the regulator. The part number for the adapter is H-2101, but it is no longer available on the sears parts direct website and I am not having much luck searching the internet for it.

@JordanSchild 3 ай бұрын

Are you able to see the tank pressure and regulator/tool pressure separately still?

@TheFixitShed 3 ай бұрын

Yes

@leomeilak6532 2 ай бұрын

I have a compressor which I installed a 2 port regulator in and out the only time I see the regulator adjust is when the output is open. It seems wrong

@TheFixitShed 2 ай бұрын

Generally, for me, the needle goes up when I increase the pressure, but when I reduce the pressure, the air has to flow to show the change. If that is what you are seeing, that is normal.

@KevinHeiden-wj4ir Жыл бұрын

The compressor turns off when tank reaches 40 psi. How can I increase the pressure psi.

@TheFixitShed Жыл бұрын

You may have a problem with the pressure cut off switch, or you may be able to adjust it. I don't have a video on doing this, but there are a bunch on youtube. Example: kzfaq.info/get/bejne/lbxnhqh4td21Z4E.html

@RepairGang Жыл бұрын

I think there was more water then air in there

@TheFixitShed Жыл бұрын

Probably. The original drain valve never worked since new. After a couple years I replaced it with the one currently in it. That is probably 15 years old and I can probably count on one finger how many times I have used it. It now no longer works. The o ring seal broke. I had to cobble something together so I could finish the video. New drain valve extension is on the way.