No video

Replacing Yamaha F100 outboard rigging tube ! (Reemplazar manguera motor fueraborda Yamaha)

  Рет қаралды 18,708

Javier Rullan Ruano

Javier Rullan Ruano

Күн бұрын

Replacing Yamaha outboard F100 rigging tube step by step
Reemplazando la manguera de conexion de un fueraborda Yamaha F100 paso a paso
© Javier Rullan Ruano All rights reserved 2020
Visit my blog:
www.javrullan.e...
www.javrullan.e...

Пікірлер: 19
@lamarbravia
@lamarbravia 3 жыл бұрын
Menudo curre te has pegado, te ha quedado genial, gracias por aportar amigo!!!
@JavierRullanRuano
@JavierRullanRuano 3 жыл бұрын
Muchas gracias!
@pirateandoelmar
@pirateandoelmar 3 жыл бұрын
Muy interesante, sobre todo para los que tengan fueraborda Yamaha, gracias por subirlo amigo!
@JavierRullanRuano
@JavierRullanRuano 3 жыл бұрын
A la orden
@vientodelgarbi
@vientodelgarbi 3 жыл бұрын
Lo veo complicado, sobre todo volver a meter todos los cables en el mazo de goma, tu vídeo puede ayudar, gracias por subirlo 👍👍👍!!!
@JavierRullanRuano
@JavierRullanRuano 3 жыл бұрын
Gracias por comentar
@marinoviejo
@marinoviejo 3 жыл бұрын
Muchas gracias, un video que va a servir de mucha ayuda, like amigo!!!
@JavierRullanRuano
@JavierRullanRuano 3 жыл бұрын
Gracias 👍
@hevix22
@hevix22 3 жыл бұрын
Impresionante trabajo, estas hecho un manitas, like amigo!!!
@JavierRullanRuano
@JavierRullanRuano 3 жыл бұрын
Gracias!
@anthonymannarino3376
@anthonymannarino3376 Жыл бұрын
Hello, why couldn’t you just change the House harness without taking everything apart ? Thanks
@JavierRullanRuano
@JavierRullanRuano Жыл бұрын
It is not possible, because you have to pass all the cables through the tube, it is therefore necessary to drop them on one of the ends, as you can see in the video, which is a complex task, but you just have to follow the video step by step and sure you get it, good luck!
@papucho503trejo3
@papucho503trejo3 2 жыл бұрын
Muy buen video, una pregunta necesito hacer alguna modificación al cambiar mi motor yamaha del 2,000, 200hp y remplazar lo por un Yamaha del 1995 220hp?
@JavierRullanRuano
@JavierRullanRuano 2 жыл бұрын
Gracias, seguramente, no te sirva el cableado, el motor nuevo suele traer todo el cableado, no te puedo ayudar.
@rudy2684
@rudy2684 2 жыл бұрын
Hi there,im about to buy a 2000 model f100 with 380 hours on. Would you know if there is a big difference in fuel consumption from this model and the efi? And do you know if there is any convertion kit to change it to efi? Thank you
@JavierRullanRuano
@JavierRullanRuano 2 жыл бұрын
Well, I have no information about the existence of a kit, but according to the manufacturer's data, there is no significant improvement in consumption between models.
@rudy2684
@rudy2684 2 жыл бұрын
@@JavierRullanRuano ok thanks. So i shouldnt be scared of buying the f100 cause it will consume much more fuel than the efi
@camarinas4961
@camarinas4961 5 ай бұрын
Que pena que no este el de Susuki jaja
@JavierRullanRuano
@JavierRullanRuano 5 ай бұрын
Pues si
How to Change the Lower Unit Prop Shaft Seals (Yamaha 150hp)
25:03
Hardin Marine Swivel Rigging Thru Hulls and Pro-Flex Rigging Hose
1:49
How To Mount An Outboard Motor Properly - Start to Finish!
7:51
Born Again Boating
Рет қаралды 849 М.
Mako Boats || 171cc Restoration Project || Installing Rigging Tube
15:06
Dylan Be Fishing
Рет қаралды 7 М.
Yamaha F90 F100 F115 Diagnosing a Bad Trim Relay or Bad Trim Motor Outboard Specialty Tools
17:50
Outboardst.com Outboard Specialty Tools
Рет қаралды 68 М.
HOW TO MOUNT AN OUTBOARD MOTOR CORRECTLY - Step By Step Do and Dont's!!
10:27
OUT with the old, in with the NEW! *90HP YAMAHA OUTBOARD UPGRADE*
9:16
Fisherman's Life
Рет қаралды 160 М.
Why You DON'T CHANGE Outboard Belts!
11:01
Born Again Boating
Рет қаралды 248 М.
Yamaha Outboard Engine Cover Spray Can Painting
8:10
AnInnerCityKid
Рет қаралды 329 М.
How Professionals Rig & Mount an Outboard Motor
4:15
Florida Sportsman
Рет қаралды 40 М.