The best 60 minutes on KZfaq, bar none. So much to love, bush engineering, mum's cut glass jug for pouring in the oil, and a dogged refusal to allow the old beast to beat you! 100% top marks!

"Not bad for a 60+ year old machine. " and the dozer did pretty darn good, too! Hahaha! Well done, fellas!

Hell of an incline, a credit to the manufacturer and the repairer

Hitting back on the bush that held him prisoner for 13 long years 😉👍

Great job bringing that old girl back to life! In case you’re not aware of it, the left track is on backwards. The grouser bar should be at the leading edge of the track pad when looking at the top of the track. They are self cleaning that way.

Marty, We sure enjoyed your videos. We had a 1938 Cat D-2 at our remote fly in or boat in homestead in Alaska . Our was a real "beater" compared to yours. After watching your videos , I thank god that we never had any engine issues. I would have been at a loss even with the manuals. Our issue was with the magneto for the pony motor and weak track tension springs so it would throw a track off the front wheel once in a while. Finally sold it to a guy who came out by snow machine in the winter and drove it 60 kilometers over frozen lakes and tundra through the woods to his place. Took him over a week due to deep snow and getting stuck numerous times. It was fun to see the inner engine workings as you guys fixed yours. Good luck.

It is so nice to see the machine rescued, restored and working.

Check it out, 13 years crying in the bush alone & a few months later under the careful hands of Marty & his friend, it's working, thanks guys for the old iron revival working videos you make, they are the best.

So awesome to see the ol girl is happy to be pushing dirt again

Love seeing this old girl back on the job

Wonderful to see this great old Cat operating again ! You men have done a fine job of bringing it back to life !! Well Done !!

60 year old dozer gets the job done. Best part is that it cost very little to get a free machine running again. That beats a poke in the eye with a sharp stick!!! A fun video to watch. I am happy these fellows were able to get the dozer going and make use of it.

As an equipment operator and farmer in Saskatchewan Canada I love all your videos I Run a d7g dozer most of the time and when I started an old boy that was teaching told me the first rule of a bush cat operator is never back up unless you can’t turn around cause the trees you just drove over are now leaning towards you and can impale you through the guarding being young I thought it was an old wives tale sort of thing until a couple years ago it happened to a friend right in front of me so be safe out there

I loved watching these when I was small , no difference now I'm older , still a good way to spend some time . Thanks

That's great that you guys got the old tractor going but then you take it out and tear up Forest land when your Forest are already shrinking

What a perfect dozer! The right size, power, and maneuverability for the job. I was always a fan of those Cats with the heavy duty roll-cage on 'em. Great video's, keep it up.

This really is a rescued cat video. You found the poor cat sad and alone, neglected and abandoned by its owner. You brought it home, cleaned it up and took it to the vet. They did a bit of surgery and gave it some fluids. Here it is back out playing in the dirt and having fun!

It's great to see that little dozer working again. I bet the guy that parked it never imagined it would be doing what it's doing now!

What an awesome machine!

Great video its truly amazing to see a 70+ year old machine still working.

for a little old machine it does a very good job.its easy to see why the pioneer machine operators took to them.you could clear more in an hour than a team of men would do in a day.thanks for the video.

If that thing had a face it would be smiling from ear to ear being put back to work like that. Brilliant job.

Thank you for taking the time, effort and money in returning this lovely old workhorse back to being a functioning dozer.

When you wake up one morning and watch the first three parts of this series and literally 1/2 hour later the final part is uploaded.... :) I did some Gorse cutting (by hand) in NZ a few years back. Nasty stuff.

I thoroughly enjoyed watching this series videos. Thank you gentlemen for all your hard work and sharing the journey with us.!

The sound of that pop engine took me back to starting one on a 1959 D6 my Dad had. I used to jump off the track as a kid, while holding the starting rope to get the umph to start her. There is a trick or two to operating those little starting motors. One is two open the cylinder petcocks and spin it over to clear the cylinders if she has been sitting or if you flooded it with too much choke.

Good to see her back to work like all the machinery you rescue

That's a nice Caterpillar you've brought back to life. The one thing I'd weld on the blade, is a push bar angled about 30 degrees to start the trees over and keep them from coming back at the operator . 🙂😎

It reminds me, when my Grandfather had 2 Cat D-6 (both with rear Hyster spools). The first time I operated one of them was, at 5 or 6 years old. Mind you, Grand'Pa was sitting just beside me. The old Austin Western master 99 grader, was a blast too. One of the difference I see is, the D-6 had a forward and reverse independent from the transmission meaning, you could go forward or reverse, without changing the gear. (Leaving it on first gear, forward or reverse...etc...)

The "nooooooooooooooo" from down the hill was priceless! lol I know very little about the old "heavy equipment" (never knew any of these used a pony motor to start them but it makes perfect sense... Good luck putting a rope-start on the main engine unless you're the Hulk lol) but I got a good chuckle thinking about having to hop out and start both motors. I'm highly impressed with how well it does for it's size!

Great to see you'll getting it running and back to work again. Boys and there toys! Have fun and Thanks for sharing!

That's one happy Cat! Back to doing what it does best after being asleep so many years!

fantastic work guys, great to see an old machine being brought back to life with love and passion

This whole series has been outstanding! Greetings from Southern California, USA.

Marty was running that CAT thru the woods. That engine was purring Neath the old yellow hood. He hit a big tree Which caused a big stall. Felt like the bull dozer had hit a brick wall. The pony was started With a big noisy blast. Revved up the diesel And gave it the gas. On thru the woods. Make the trail double wide. Marty’s CAT is a runnin’. We enjoyed the ride! Thanks for the fun. Hope we see Old Yeller again soon. 🤠

That little darlin needs a turbo!!! You wouldn't get stuck anymore!!

The old Bugger is working quite nice! Good job guys!!

The D2 series was great! I really enjoy your equipment rescues, thank you!

Nice work on merging the 2 cameras into the video Marty. I could watch hrs of this in episodes as your projects are completed. I look forward to your unique commentary as to what’s happening, so feel free to chat more 👍🍺🍺🍺

Excellent video, great to see the resurrection of an abandoned machine, even better to see it earning a living. Thanks.

That dozer was a heck of a lot of work . But it was worth it in the end . You guy's certainly know your heavy engineering . D2 working like a dream now , got caught on some stumps a couple of times , but certainly done the job in the end . Engine sounding great by the end !

What a beauty! Excellent restore. Congratulations.

WELL DONE FOR THE D2 RESCUE - NOW IT WILL WORK FOR ANOTHER 50 YEARS !!!!

Nice Job getting the old Cat working again.

I've ran alot of different kinds of dozers over the years like 750,650,550 and 450 and few Cat D6, D8, and the best I've ever ran was a brand new really wide track D3 Cat I put down alot of 33c gravel with it at the new Charms factory in Covington TN after I put that all way around it my boss said dam what a good job tell james we dont need the road grater tell him just bring the paver .

Every male on the planet dreams of owning and doing some heavy work in a dozer. : )

Fantasy job fellows well done love work put in those great dozers

Good to see the old girl pushing again love it

Love the content man! Digging the frequent uploads as well!

Brings back memories of the old days when you had the next move planned now the equipment thinks for the operator. Memories pony motors, master clutches, standard shift transmission, cable blades takes me back , and I love it. Thank you.

She’s still got some guts. Wishing I was there to see fellas getting it done. ( Maine, USA)

watched all of them bring this back to life, and loved it.. thanks for posting these!

Now that's a thing of beauty Marty. Bulldoze all that thick nasty brush!!! 👍👍 Jay.

I keep expecting a swarm of Bees or Hornets, or Wasps, to just appear as you run over a nest! God i hope that does not happen to you, just be aware. She is a Beauty, and as long as you look after her, she wont let you down. Good job done too.

Those old machines are hard on the back and kidneys. Thank for sharing.

2 great friends and an old dozer to work on?? nothing better..

Fantastic :) It's always great to see old machines brought back to life, and put back to work! :)

Running like a charm great job fixing it I would love to find some thing like that 👍

Hello from across the ditch. Well done for saving this thing. I can't stand to see things thrown away when they can be saved and used again.

The little D2 runs great

Love watching these old girls come back to life!

Wish I could go up in the Bush and find something like that..... I only ever find is old barbed wire and fence posts..... It's great seeing old machines rebuilt and used again.

Wonderful to see you fellas bring that machine back to life, well done.

ای والله حرف نداشت از زحمتی که انجام دادید😍😍

Love your work mate. Watched all your videos I think.

Little CAT seems to be running pretty well!! That cage is pretty nice especially thrashing through the nasty brush. The stall reminds me of the old IH TD9 I had. If you stalled it you had to go through the whole routine of starting the gasoline part to restart the diesel.

Nice job on saving the old girl.The pony motor is louder than the diesel. Seems a little light for the task at hand. Thanks for sharing.

That is a great save on that old beast. Glad everything worked out for you guys.

Ya made my weekend Marty - great story - thanks for sharing.

Awesome series. What a cool find. Perfect size machine and sounds great.

You guys did a GREAT job.....thanks for posting.

Running clean and smooth! Now you getting work done!

You guys are simply amazing!

This is so awesome ever since you got the digger I've been watching and looking for a find like these so awesome thumbs up my friends

Powerful little machine

Good to see the cat back to work . Thanks for sharing

That's an awesome video both of you put a lot of blood sweat and tears and you fixing that and it's great to see that is back to work doing what was built to do great job

Great job. Enjoyed watching the entire series.

That must be satisfying after all that hard work.

Well done fella's, nice tutorial mechanics ... skill n 'know-how', good to see that dozer back in action...tino pai-raawaatu....awesome...frm an HD 21--Allis Chamber dozer operator.[NZ]...thx

I like it when old things are brought back for some more service.

What and achievement - well done and thanks for the video - lovely little machine - well designed and looks right!

i hope you realize you are living my dream life. all the best from kalamazoo, michigan. be well

Now what you need is a robust trailer that lunch and drink and saws and fuel for them and the pony and big engine. Might as well have a nice one for a trick work away from the house. Drop it along the way and work then come back to take a break.

Great vid love watching old machines working

What a great find I hope I find a D2 one day too.

Great to see her still pushing!

What a little gem, would love to have that for my place.

Did a great job. Love old machines

I love it.......pull start like a lawnmower!!

Gorse is NZ's national flower. Nothing kills it. The idiot who introduced it needed to be made to sit in a gorse bush ,especially a dried out example. Back in the 70's a mate bought a D9 of the same vintage. To get it from where it had last worked he had a brilliant idea,drive it across country to their farm and clear gorse for the cockies on the way,to get permission to pass over their farms. it took three years... and I remember the rolling wave of gorse he could build up in front of the blade .The old D9 looked tired but was actually in pretty good nick, just requiring regular service . Keep 'em oiled and watered and they will reward with great service.

It's amazing how much quieter the big main engine is.

Looks great. Fine little machine

So jealous right meow. Your cage looks cooler than mine. Then the blade, oh I wish I had an angle blade. What a score

I grew up about forty miles west and a little south of Birmingham Alabama. Al. Power was putting in a new lake and dam to gererate electricity. They started around sixty one and it filled to full pool in about sixty three or four. We had a front row seat to watch the equipment working. They even lost a big dozer, when it snak in a soft area overnight. When they found it the next day, it had snak so much that they couldn't start it and they tried to but failed to pull it out of that hole.

Love to find one of them..worked on a farm with an old D6..good times.

Great to see the old girl up and running again!

An oldie but a goodie.

Those pads on that old girl aren't even too bad at all. Best part about that thing, it will just continue to work and work. While all the new iron gets recycled within 15-20 years.

I owned one a ‘42 model. Not much on power but it was handy. Put a starter generator off a lawnmower on it. Heck with pull starting that pony engine.