No video

Resetting a Trimble EZ Guide 250

  Рет қаралды 47,354

Benn McKenzie

Benn McKenzie

8 жыл бұрын

How to reset a EZ-guide 250 when it won't start up properly

Пікірлер: 30
@kentwayne8498
@kentwayne8498 2 жыл бұрын
Thank you for this. I didn't know what the problem was and neither did the dealer. You're a hero!
@johnloewen3312
@johnloewen3312 2 жыл бұрын
Thank you for the clear guidance in resetting it.
@neelsnortje6634
@neelsnortje6634 2 жыл бұрын
Thank you very much i can work again.
@user-mu7be8bx1t
@user-mu7be8bx1t 6 жыл бұрын
Хоть узнал как сброс сделать,а то ни где не показано! Спасибо!
@itua1016
@itua1016 8 жыл бұрын
БОльшое спасибо очень помогло в настройке!!!!!!!!
@marcelotela7601
@marcelotela7601 7 жыл бұрын
Александр Треснитский eu pocuro asfunsau como emtar
@magro9125
@magro9125 5 жыл бұрын
Не понял ))) в начале ... нашими словами : зажать нижние левые и верхней включить ?
@vladislavavr146
@vladislavavr146 7 жыл бұрын
Тоже помогло, спасибо)
@philcurulli6190
@philcurulli6190 3 жыл бұрын
Thanks mate!!
@euu66
@euu66 Жыл бұрын
hello, I did it on the my device exactly as you did in the video. the reset worked, but the Portuguese language option disappeared. Can you help me please?
@user-oe1nr1lq1h
@user-oe1nr1lq1h 5 жыл бұрын
very nice man
@tomnapier1108
@tomnapier1108 4 жыл бұрын
ask all the tech people I would find at wimmera field day gps is a write off signs of a problem is it doesnt ask for a field the next problem is cant start and A - B line from what I was told it requires a reduction of stored data which is a soft start by pressing the 3 buttons on the right or the hard start 3 buttons all pushed down on the left which then requires a re install of settings there is a path to find in functions where you can find a place to remove the data seems too much painting of fields is the culprit other than that it would have kept working ok sadly up for a new one hope this helps someone save the unit from a lockout
@amyhofford6437
@amyhofford6437 6 жыл бұрын
thank you!
@alexandruandru455
@alexandruandru455 4 жыл бұрын
This is great. Thanks.
@tomnapier1108
@tomnapier1108 4 жыл бұрын
MIne is showing the New Holland background will scroll the lines across the bottom then a new run of white lines and gets as far as Z blinks off and starts over again done a 3 button start on the right and the lightbar keeps lighting up and moving from one side to the other the tech said it will do this all day if left 3 button restart on left and keeps doing the same bar across the bottom and blinks off and restarts again looks like a trip to dealer to see if they can work out why it was previously doing a lost A to B start for A --- B runs it would keep losing the A to B after a few tries it would finally set the A B line Will add after I find out what went wrong and why it wont restart
@NZCODPLAYER
@NZCODPLAYER 4 жыл бұрын
tom napier you have put it into mon mode so it can have a software upgrade via a computer using flash loader if your getting the lights flashing across the top from memory that means your not holding the power button down as well as the bottom two buttons remove the Power from the back and try running the reset again
@tomnapier1108
@tomnapier1108 4 жыл бұрын
@@NZCODPLAYER thanks I have tried it all and just can't get it to reset I will take it to warrnambool Monday and let them try I had all the buttons down hard and it won't trip. Auden said press all 3 on the right and just got the lightest working Did a hard reset on the left side and just won't reset There is something else not right as setting an a b line was not going to b. And just kept going back to a. Thanks for the suggestion. Another post online said their mother board was faulty so Monday I will find out. Watch for answers
@NZCODPLAYER
@NZCODPLAYER 4 жыл бұрын
tom napier I have a feeling thinking about it you may have to hold all three down on right to get it back out of monitor mode I can remember off the top of my head and as long as it’s in mon mode you can not do a reset it is normal for it to not to set B point if it is full of data as the display eventually just runs out of room to operate itself I doubt it has motherboard issues
@tomnapier1108
@tomnapier1108 4 жыл бұрын
@@NZCODPLAYER think that's part of the problems too much in field storage. Strange I can't hard reset
@tomnapier6634
@tomnapier6634 4 жыл бұрын
@@NZCODPLAYER took it to service tech and he couldnt get it to reset either and you cant go to software part if the main screen is not working I was told so its going to GPS doc to get a look at
@user-tc3in4kv6r
@user-tc3in4kv6r 5 жыл бұрын
бля а перевод,
@johnloewen3312
@johnloewen3312 2 жыл бұрын
Thank you for the clear guidance in resetting it.
EZ-Guide 250 Demo Video
13:48
PTx Trimble
Рет қаралды 312 М.
Please Help Barry Choose His Real Son
00:23
Garri Creative
Рет қаралды 16 МЛН
黑天使遇到什么了?#short #angel #clown
00:34
Super Beauty team
Рет қаралды 41 МЛН
艾莎撒娇得到王子的原谅#艾莎
00:24
在逃的公主
Рет қаралды 47 МЛН
The Joker saves Harley Quinn from drowning!#joker  #shorts
00:34
Untitled Joker
Рет қаралды 59 МЛН
Trimble EZ Guide 250: Basic Field Setup
8:58
DeHaven Family Farm
Рет қаралды 23 М.
How to Set Up Your Trimble EZ Guide 250
8:19
Trimble Ag Operators
Рет қаралды 6 М.
Straight Lines! Trimble EZ-Steer Calibration.
7:39
Thomas FarmsTN
Рет қаралды 18 М.
Almost EVERYONE is Wasting Money on Dash Cams.
17:32
Linus Tech Tips
Рет қаралды 10 МЛН
EZ Guide 250   upgrade to firmware version 12  and set up
3:42
carl thompson
Рет қаралды 7 М.
Trimble EZ 250 - Borrar Grabación de Cobertura
4:30
Emilio Risso
Рет қаралды 23 М.
EZ Guide 250 Basics Part 1
14:20
Jon Hofstetter
Рет қаралды 24 М.
прошиваем  trimble guide 250 новой прошивкой
2:59
Please Help Barry Choose His Real Son
00:23
Garri Creative
Рет қаралды 16 МЛН