Resin and Silicone Molds Crochet Hooks Tutorial

Рет қаралды 15,892

3 жыл бұрын

The below listed products are only products that I use myself or similar replacements for what I use. Please note that in my videos I only express personal opinions on methods of creating my projects. There are many methods to accomplish the end result, please use a method that works well for you. Remember the main goal in crafting is to enjoy and be happy in your work. This description box may contain affiliate links that have no additional cost to you, but may earn me a small financial benefit. This helps support my channel, so I can provide new content and inspire you in your creations.
Glitter: www.backcountryglitter.com/pr...
Molds: 10 Pieces Resin Silicone Crochet Hooks Mold Set, Resin Casting Molds and Tools, Knitting Needles Craft Casting Molds 3-10 mm with 20 Pieces Dropper for DIY Crafts www.amazon.com/dp/B08VNC3P32/...
Our Etsy: etsy.me/2LNQuSt

Пікірлер: 142

@sandrahankins8488 5 ай бұрын

Just found your channel, so far your the only one that takes you thru the process. Very well done.

@kellyfleming2703 3 жыл бұрын

I just got my set,you are the first one who actually explains how to do this. Thank you

@backcountrycustomcreations448 3 жыл бұрын

Thank you for the kind words. You will have to let me know how you like them.

@GrammieWilliams 2 ай бұрын

That is awesome... I love these, and PINK is my favorite color... Thank you...

@karlaskreation 3 жыл бұрын

Thank you! This was an informative video. I wish you had shown how you smoothed out the mold fill line. It was noticeable on the smaller hooks.

@backcountrycustomcreations448 3 жыл бұрын

Thank you for the kind words. See if my revised second video helps you.

@cathiesmith0812 Жыл бұрын

I just came across this video and I was intrigued by your experiment. I think if you were to try it again, pink or purple are really pretty.

@jeanaa4049 3 жыл бұрын

Thanks for the info, can't wait for the follow up!

@apothecrafty8195 2 жыл бұрын

Love this! Thank you! And thanks for the part 2 showing how you got rid of the excess on the back!

@backcountrycustomcreations448 2 жыл бұрын

You’re welcome!

@elizabethlozano8242 Ай бұрын

Where can I find part 2?

@queentingz4802 3 жыл бұрын

Such a beautiful set. Thanks for the share and i loved your cat ☺

@backcountrycustomcreations448 3 жыл бұрын

Thank you, he always has to help.

@Vee-cr5wp 3 жыл бұрын

These are beautiful! Thanks for the tips. I have a set on the way and can’t wait to start!

@backcountrycustomcreations448 3 жыл бұрын

You’re going to love them. Just be careful not to over fill like I did. You don’t want to fill to the top of the mold as that will leave a square back to the hooks.

@pauladavis7497 2 жыл бұрын

Love the hooks. Nice job. You make them look easy.

@backcountrycustomcreations448 2 жыл бұрын

Thank you

@dira_for_short 3 жыл бұрын

You are a life saver. I was just about to send my hook molds back

@backcountrycustomcreations448 3 жыл бұрын

Glad to help in any way.

@tanyagoode6883 3 жыл бұрын

This was a wonderful tutorial

@backcountrycustomcreations448 3 жыл бұрын

Thank you for the kind words.

@themoodyonejb 2 жыл бұрын

Just ordered my set, can't wait to make my mother and I a few sets. New subby

@backcountrycustomcreations448 2 жыл бұрын

That’s awesome!! I hope you enjoy them.

@jcdelrosario8339 3 жыл бұрын

finallyy someone made a tutorial for crochet hook molds, thaaankk youuu for this tutorial

@backcountrycustomcreations448 3 жыл бұрын

You’re welcome glad you like it.

@BBFCCO733 2 жыл бұрын

Great tutorial!

@backcountrycustomcreations448 2 жыл бұрын

Thank you!

@SettasPlace 2 жыл бұрын

Beautiful!😁💜🧶

@backcountrycustomcreations448 2 жыл бұрын

Thank you!

@aurianabaun5582 3 жыл бұрын

Thanks so much for this video!!

@backcountrycustomcreations448 3 жыл бұрын

I’m going to be doing an update one soon. Had some family issues so haven’t been able to do one yet but soon.

@selinaplaylist5981 3 жыл бұрын

This is a fantastic video, been looking for how to do this and you are the only one who shows how to create your own hooks. Thank you!

@backcountrycustomcreations448 3 жыл бұрын

You’re welcome! See my part two video as well, may give you more tips.

@selinaplaylist5981 3 жыл бұрын

@@backcountrycustomcreations448 Fantastic Thank you so so much!! WIll check it out now!

@jamieprewitt873 3 жыл бұрын

Oh and thank you for the video

@backcountrycustomcreations448 3 жыл бұрын

You’re welcome. I’m planning another video to go over some of the questions I’ve gotten as well.

@kristicreager2992 6 ай бұрын

Hello you don't have to wait for the paint to dry before you remove the extra paint you just paint the letters or your design and you can wipe the wet paint off it's easier

@tracycaldwell7679 2 жыл бұрын

I was asked why I didn't make my own hooks because fancy hooks are expensive. Well I don't know but I want ergonomic for my carpal tunnel. I like these hooks you just made they're pretty

@backcountrycustomcreations448 2 жыл бұрын

Awe thank you!

@specialk8927 3 жыл бұрын

I saw those the other day on eBay so I went to Amazon to see if they had it cause I never saw them before so I ordered it and should get it today

@backcountrycustomcreations448 3 жыл бұрын

Awesome!

@medicgrrl123 2 жыл бұрын

You are awesome!!! :-) :-)

@backcountrycustomcreations448 2 жыл бұрын

Thanks!

@Breezy-bv9te 3 жыл бұрын

You should sell these.. I would definitely buy them, they came out Beautiful that glitter color is Awesome! I love to crochet but I'm not one to make my own hooks, I'm not that crafty, wish I was though. This was a very interesting tutorial..

@backcountrycustomcreations448 3 жыл бұрын

If you crochet you are definitely very craft and have patience. I am definitely going to be getting these listed on my Etsy site soon.

@Breezy-bv9te 3 жыл бұрын

@@backcountrycustomcreations448 That would be Freaking Awesome! If you put the ones like you made in this video to sell I will be the first on line!

@crochetmelovely 3 жыл бұрын

👏👏👏👏👏👏👏

@charlenerenee7751 2 жыл бұрын

They are beautiful. I wonder how they work?

@backcountrycustomcreations448 2 жыл бұрын

I’ve only used one of the larger ones so far and it worked great.

@liliannamarie1509 3 жыл бұрын

Do you use a spray on the mold before filling them? These are lovely!

@backcountrycustomcreations448 3 жыл бұрын

Thank you for the question. No, I do not have to use mold release on these. They are great quality and I have had no issues so far. I don’t use any heat on them either which may make a difference.

@ashleyvincent1860 3 жыл бұрын

These are gorgeous and the glitter used is SOOOO pretty! You don't happen to crochet or know someone who does, do you? Cause I have questions! lol How nicely do these crochet? Do they squeak with acrylic yarn? How consistent is their sizing with other hooks? I've been eyeing molds like this for myself, but I can't bring myself to take the plunge because I crochet, and for every reason I'd love my very own custom hooks, I have ten for why I'd be upset if they weren't at least consistent with other basic hooks. Thanks for answering, if you do, I'm sorry if my billion questions are annoying!

@backcountrycustomcreations448 3 жыл бұрын

I do crochet but haven’t had a chance to try them yet. I need to get my hooks out and lay them side by side to see how they compare. Maybe I’ll make a follow up video comparing them and trying them with yarn.

@ashleyvincent1860 3 жыл бұрын

@@backcountrycustomcreations448 Please and thank you! I'm going to subscribe and keep an eye out for that.

@suekrenzelok7249 3 жыл бұрын

@@backcountrycustomcreations448 That would be great .

@roseann1954 3 жыл бұрын

How did you fill the molds without support? I had to use miniature binder clips attached to paper cups to stabilize the molds.

@backcountrycustomcreations448 3 жыл бұрын

Hi Roseann great question. These particular molds have the little support leg like things across the bottom in several spots. If they are on a flat surface they stay up really well as long as you don’t bump into wherever you put them. I put these on that 1x6 board and then put it on a shelf out of the way.

@tiarashaboykin9148 3 жыл бұрын

What kind of holder did you place them in? They are gorgeous!

@backcountrycustomcreations448 3 жыл бұрын

I sat the molds on a 1x6 piece of wood for them to cure. As long as it’s a flat surface and out of the way so they don’t get bumped into.

@tanyaohm5171 Жыл бұрын

Thank you for showing this I have a heck of a time getting the air bubbles from the hook I love making them but get so mad each time. My resin is a thicker style so not a runny one may have to change a bit. You didn’t show your sanding them down and hat do you use? I have many different grit but wanted to see someone else do theirs. Ps LOVE this colour

@backcountrycustomcreations448 Жыл бұрын

I’m glad you enjoyed the video. Counter Culture DIY has an amazing thin viscosity Artist resin. It is perfect for molds. All you have to do to release the air bubbles is use a pipette tip or toothpick. Makes doing anything with molds so much easier. For sanding I use 60, 80, and 120 grit, sometimes I even go to 220. The sanding just depends on how rough the piece is. I both sand by hand and use my dremel tool.

@backcountrycustomcreations448 Жыл бұрын

Also for sanding I use a deburring tool and that helps tremendously. See my second video for more tips!!

@skatpak2967 3 жыл бұрын

where did you get these molds so cool..thank you

@backcountrycustomcreations448 3 жыл бұрын

Off Amazon!

@minini5571 2 жыл бұрын

What type of resin do you recommend? Great video!

@backcountrycustomcreations448 2 жыл бұрын

I personally love Counter Culture DIY Artist Resin. For these molds thin viscosity.

2 жыл бұрын

What about sanding the excess off? Do you have a video on that part?

@backcountrycustomcreations448 2 жыл бұрын

I don’t really sand much I use a deburring tool and cut the excess. I’ll sand just a bit too smooth after using the deburring tool.

@jessarsenstudios 3 жыл бұрын

How do you sand them down? The back leaves a notch near the hook which is not good for crocheting the yarn gets stuck. Can you show how you get rid of that? I'm having trouble. Thank you. ♥️

@backcountrycustomcreations448 3 жыл бұрын

Hi Jessica, absolutely I’m planning another video on this as well as a comparison of these and the metal crochet hooks I own.

@jessarsenstudios 3 жыл бұрын

@@backcountrycustomcreations448 That sounds amazing thank you ♥️

@anastasiadsigns4u 2 жыл бұрын

My hooks came out bendy but some other things I poured from the same batch came out hard ???? I see a lot of reviews for resin hooks that say they are bendy too. thoughts ??? suggestions ???

@backcountrycustomcreations448 2 жыл бұрын

It’s the thickness of which they are. The thicker the pour the longer they need to cure. Some resin gets hard faster than others. A casting resin would work really well too.

@tea-korailuvtea3172 3 жыл бұрын

These are absolutely stunning! Do you sell these? Would you be able to do these with Susan Bates hooks?

@backcountrycustomcreations448 3 жыл бұрын

Hi I do make these and sell them. I don’t have any made up right this moment. Unfortunately these are a mold sold on Amazon and are not specific towards a specific brand of hook.

@saraduszynski506 3 жыл бұрын

my pipette doesnt seem to suck up the resin - maybe i got some cheap crappy ones. where did you find yours?

@backcountrycustomcreations448 3 жыл бұрын

Hi Sara, I just get them off Amazon.

@suekrenzelok7249 3 жыл бұрын

How did you sand off ridges from over fill.

@backcountrycustomcreations448 3 жыл бұрын

Sandpaper and a deburring tool.

@goodies707 11 ай бұрын

you can not use these because they are flimsy and bend. At least mine were. I thought they were lovely but unfortunately when I went to use the smaller one bent a lot. Can you do a follow up video plz. Thank you so much for this video

@backcountrycustomcreations448 11 ай бұрын

Oh no I’m so sorry. Mine have all done great. Not sure what resin you have on hand but one that cures harder may work much better.

@kellyfleming2703 3 жыл бұрын

With mine I was thinking of putting a wooden dowel in there for strength. Do you think it would work

@backcountrycustomcreations448 3 жыл бұрын

You may could do a really small one. I would not put it toward the hook part though. Just my opinion of course. A piece of wire may work as well.

@kellyfleming2703 3 жыл бұрын

@@backcountrycustomcreations448 thank you. I only cut them for the handle

@vchick2010 2 жыл бұрын

How do you get rid of notch on the back of the hook? You didn't sand it away or anything 🤔

@backcountrycustomcreations448 2 жыл бұрын

I have another video up that is kind of like a part two. I use a deburring tool and resin.

@suekrenzelok7249 3 жыл бұрын

Hello I've done several of these hooks. each time I try they get better , but I can't seem to get them hard enough to crochet with. Any ideas?

@backcountrycustomcreations448 3 жыл бұрын

Are you adding glitter? If so be careful how much you add as it will keep the resin from hardening.

@quiltcavequilter6952 3 жыл бұрын

Any idea when you will be getting the Cheshire Cat glitter back in stock? And if so, how much do I need to make a set exactly like yours?

@backcountrycustomcreations448 3 жыл бұрын

Hi! We have some www.backcountryglitter.com/products/cheshire-cat and 1oz is more than enough.

@carolrivera6871 3 жыл бұрын

Just saw your tutorial. By any chance do you sell the crochet hooks you make?

@backcountrycustomcreations448 3 жыл бұрын

Hi Carol, I just saw your video. My crochet hooks will be listed on my Etsy this week.

@annegagnon8440 2 жыл бұрын

hello, I watched your video a few times! I wanted to be sure to fill my molds well. but I would like to know how you managed to fill the 3mm hook. it's very small and the resin has a hard time going to the bottom of the hook

@backcountrycustomcreations448 2 жыл бұрын

I had to wiggle and twist the pipette to push out that air bubble.

@annegagnon8440 2 жыл бұрын

@@backcountrycustomcreations448 OK, thanks! I also suppose that with dark colors we can better see if there are any air bubbles. I will try next time

@backcountrycustomcreations448 2 жыл бұрын

Correct as the lighter colors blend with the color of the mold. When I did my dark pink ones I could see just fine but then I did coral and those were more challenging.

@laace2003 3 жыл бұрын

Ty so much for your tutorials on making resin crochet hooks. Can you tell me what brand of resin you use. I am new to resin. My hooks are bendy and will not harden. I think it's the brand. Any help will be appreciated. 🧶

@backcountrycustomcreations448 3 жыл бұрын

You’re welcome. I prefer Counter Culture DIY resin. They have both artists resin and casting resin. I generally use the original artist resin because I do other things with resin as well. They have small bottles so you can order a couple different ones to see which you like better. Remember when pouring resin in molds it will take a little longer to harden than usual. Especially with the crochet hooks because there isn’t much open space on the molds. I generally don’t take mine out of the mold for 24-48 hours. Then it can still take a couple more days to finish getting hard and most epoxy isn’t fully cured for 30 days. Also if you want to try UV Resin I have a preorder on my site now for 200g bottles $20. www.backcountryglitter.com/products/uv-curable-resin

@laace2003 3 жыл бұрын

Ty so much! I will order what you said as your hooks are lovely. 🤗🧶

@backcountrycustomcreations448 3 жыл бұрын

You’ll have to share your hooks once you have some done.

@laace2003 3 жыл бұрын

I would like to order your uv resin for the hooks. What do you feel you be best, thick or thin for the hook molds?

@backcountrycustomcreations448 3 жыл бұрын

Thin definitely for molds.

@Owlmom58 2 жыл бұрын

Do you spray the molds with vegetable oil to let the hooks ease out of the mold easier? Where did you find your kit? Etsy has the hook molds but someone said that the molds break after the 1st time

@backcountrycustomcreations448 2 жыл бұрын

Sorry for delay in response I’ve been in the hospital. I do not spray my molds with anything, but you could use mold release. I’ve not had an issue with mine demolding. I got my molds from Amazon. Let me know if there any other questions.

@Owlmom58 2 жыл бұрын

Thank you for responding.I hope you are well. Thank you for your help.

@backcountrycustomcreations448 2 жыл бұрын

Thank you!

@dianarabucior4929 3 жыл бұрын

I just remolded mine and was having the issue of the handle of the hooks not curing straight. I didn’t have them cure on a board like you did, do you think it was that ? I also used 72 hr resin.

@backcountrycustomcreations448 3 жыл бұрын

Were they on a flat level surface? If they were and nothing was bumped into it could be the resin, but I don’t think that is it. It sounds more like the mold just wasn’t laying completely straight while curing. I would definitely try again and maybe place on a different surface area.

@dianarabucior4929 3 жыл бұрын

@@backcountrycustomcreations448 yes it was because they were not level on the table. How did your 3mm turn out ? Mine were super weak. I'm thinking about maybe making my own silicone crochet molds and see how that works out

@backcountrycustomcreations448 3 жыл бұрын

Hi Dianara, Sorry I’m just seeing your comment. My 3mm is very tiny and I feel that if you caught it in thread or small yarn it may break. I did try it with some lacing thread that I have and it did good, but I was extremely careful. Thankfully, that one is not a more popular hook. You will have to let me know how your mold turns out.

@undlasasher8346 3 жыл бұрын

Is it as soft as crochet hook is

@backcountrycustomcreations448 Жыл бұрын

These are smooth if done correctly, I crochet with the set I made myself.

@carrietomkins1497 3 жыл бұрын

Do you sand them?

@backcountrycustomcreations448 3 жыл бұрын

These I did the back just a tiny bit on the ones I over filled. I’m going to do more this week and not over fill. There is also a deburring tool I’m getting tomorrow I want to try as well that I’ll review.

@dennishight4419 2 жыл бұрын

What is the name of the item that you filled the molds with?

@backcountrycustomcreations448 2 жыл бұрын

I use Counter Culture DIY Artist Resin. It is epoxy resin.

@videocompilation609 3 жыл бұрын

Its haaaardd to fill the hook part 😩, there is always bubbles

@backcountrycustomcreations448 3 жыл бұрын

It can be difficult but if you can get the nozzle of the pipette it there and squeeze and pull back at the same time it helps.

@specialk8927 2 жыл бұрын

Mine still spills over and fall

@bonnierubin 7 ай бұрын

How much resin did you need to make the set of crochet hooks

@backcountrycustomcreations448 7 ай бұрын

That’s a great question. I want to say between 50-60ml total. It’s been a while since I have made a set.

@bonnierubin 7 ай бұрын

@@backcountrycustomcreations448thank you. I wish resin molds would come with this information when purchased.

@jamieprewitt873 3 жыл бұрын

I just ordered and got some of those molds in with the idea of making some for my sister and MIL. I just did some and looking at these not turning out right. I think I'm not stirring the resin enough. The little plastic filler tube. Yours seemed to fill a lot easier than when I did mine. I was fighting to fill the little tube with resin. I'm gonna go ahead and let these set and see at least how they turn out. Didn't help I gor resin on my hands. Any tips for a better turn out?

@jamieprewitt873 3 жыл бұрын

Oh what was the white doing the numbers with?

@backcountrycustomcreations448 3 жыл бұрын

The white was just white acrylic paint.

@backcountrycustomcreations448 3 жыл бұрын

What epoxy are you using. Definitely mix the epoxy until clear. It should turn cloudy then clear as it is mixed completely. Depending on the brand it may be too thick. I personally like Artist Resin from Counter Culture DIY.

@jamieprewitt873 3 жыл бұрын

It was kool Kraft resin/hardner clear epoxy resin A/B

@jamieprewitt873 3 жыл бұрын

I don't think I was stirring long enough. I'm gonna try again after these set, take out and try again

@jeanaa4049 3 жыл бұрын

Mine are still bendy after 3-4 days, is that normal?

@backcountrycustomcreations448 3 жыл бұрын

Did you add glitter? What type of epoxy are you using?

@jeanaa4049 3 жыл бұрын

I am trying again with no glitter (just clear) so I have a better idea of whether it was too much glitter or the type of resin. Is there a brand of resin you would recommend? TIA

@specialk8927 3 жыл бұрын

Why not use a baby wipe instead of the sticks to scratch it

@backcountrycustomcreations448 3 жыл бұрын

You absolutely can. I tend to make more of a mess with the baby wipe so that’s why I use the stick.