Resin Stud Earrings In Bulk Tutorial

Рет қаралды 155,151

Жыл бұрын

This video shows you how to make resin stud earrings.
I’m an Amazon affiliate and here are the links to where I got my supplies for making this jewelry.
Resin:
amzn.to/3EzI4pK
UV Resin:
amzn.to/466IzTT
UV Resin Light:
amzn.to/3PAm6Ji
Mold:
amzn.to/3P3yIqU
Dried Flowers:
amzn.to/3ZaT8my
Glitter Flakes:
amzn.to/3Ra36Tn
Gold and Silver Foil Flakes:
amzn.to/3P9RQE0
Dried Flowers:
amzn.to/3PeIzKV
amzn.to/3sUxmax
Mica Powder:
amzn.to/489ZNS8
Little Jewels:
amzn.to/3Pau6iZ
Stud Backs:
amzn.to/460Rw1D
Jewelry Pliers:
amzn.to/3Za1rz7
Gloves:
amzn.to/3rbVyVB
Mask:
amzn.to/3RhhXLH
Mask Filters:
amzn.to/3RbQ9Zf
Droppers:
amzn.to/44NfNqf
Stiring Sticks:
amzn.to/44SVaJb
Mixing Cups:
amzn.to/3ZsQk4F

Пікірлер: 202

@maladylis08 Жыл бұрын

Very cute ! If you left them all in the trays, you could put the backs on easier all at once while they are held in place. You could even use a fast drying resin for the last step for easier setting of the resin to hold on the backs. Love your earrings !

@leehomestead3424 Жыл бұрын

Thank you! Thank you for watching! ❤️

@Nirrrina Жыл бұрын

Steve Macdonald suggested that when he does the stud earrings he wait to a point that he can push them into the resin barely so it comes over the edge to hold it on. But if he waits too long he'll use some UV resin over the edges.

@illinium1727 7 ай бұрын

@@leehomestead3424very beautiful! Can you also make a video on how to price our items? Thanks so much❤

@leehomestead3424 7 ай бұрын

@@illinium1727 I can do that! ❤️

@illinium1727 7 ай бұрын

@@leehomestead3424 thank you so much🥰

@stormysworld1242 Жыл бұрын

Awesome job! Love these ideas, thanks for sharing!

@leehomestead3424 Жыл бұрын

Thank you so much! ❤️

@dawnjones7706 11 ай бұрын

These are beautiful!

@leehomestead3424 11 ай бұрын

Thank you so much! ❤️

@vickinoeske1154 9 ай бұрын

Really pretty and I like the 3 sets sold on 1 card.❤

@leehomestead3424 9 ай бұрын

Thank you! ❤️

@journeyhome98 5 ай бұрын

I loved the video! I loved listening to you talk through the whole process!

@leehomestead3424 5 ай бұрын

Thank you for watching! ❤️

@MemoryGem 9 ай бұрын

These are so cute!

@leehomestead3424 9 ай бұрын

Thank you so much! ❤️

@jojocool555 9 ай бұрын

Fantastic tuitorial, great info. Thank you. x x

@leehomestead3424 9 ай бұрын

Thank you so much! ❤️

@TCHARRISON1 10 ай бұрын

Your earrings are so pretty and dainty. I think I've just found my new hobby. Now I shall go and buy all the stuff I need, to make resin jewellery. I already make jewellery with crystal and pearl beads, so i'm excited to try something different and new and make my own little resin trinkets. Thankyou for sharing🌸😊💜

@leehomestead3424 10 ай бұрын

I’m so excited for you! I know you’ll make beautiful pieces! ❤️

@heidisfun Жыл бұрын

so cute!

@leehomestead3424 Жыл бұрын

Thank you! ❤️

@sda141 Ай бұрын

These are all so cute! 🥰

@leehomestead3424 Ай бұрын

Thank you! ☺️

@customMadebyACLD 10 ай бұрын

This is so cute. I use UV resin to make all my resin projects as I hate to wait. I like the instant gratification. 😍❤️😂🤣🥰💜💙. For the ones that have a light filling it'll pop better if you use a darker background. Thanks so much for sharing

@leehomestead3424 10 ай бұрын

Thank you so much for watching! ❤️

@elena1414 4 ай бұрын

Thanks a lot for your video) a lot of inspiration and ideas ❤

@leehomestead3424 4 ай бұрын

Thank you for watching! ❤️

@jigishah8584 Жыл бұрын

Thank you so much , your video is very useful because I don’t have job and I need money so it’s very good for me to make this and sold

@leehomestead3424 Жыл бұрын

I’m glad it was useful! I hope you do well! ❤️

@brendamorris5036 10 ай бұрын

Very cute

@leehomestead3424 10 ай бұрын

Thank you so much! ❤️

@craftyfox1959 Жыл бұрын

I have those molds. I have been using them for left over resin. I like your projects.

@leehomestead3424 Жыл бұрын

Thank you! I hope you try this out! ❤️

@user-by6xt5sb1r Жыл бұрын

Love your videos and creations so inspiring keep them coming!! Xo Eve

@leehomestead3424 Жыл бұрын

Thank you and thank you for watching! ❤️

@su88_3 Жыл бұрын

thank u ...just cute

@leehomestead3424 Жыл бұрын

Thank you! ❤

@harjitkaur4318 8 ай бұрын

Really beautiful i will also start soon this resin work 😊

@leehomestead3424 8 ай бұрын

Thank you! ❤️ That’s great! 🤣. Please use a proper mask and gloves when working with resin. I know you’ll make beautiful pieces!

@yuridiaz7779 11 ай бұрын

HERMOSO !💚💗🙏

@leehomestead3424 11 ай бұрын

Thank you! ❤️

@cherylmeyer9857 10 ай бұрын

❤ just found you, love your work!

@leehomestead3424 10 ай бұрын

Thank you so much! ❤️

@mayramarrero1218 Жыл бұрын

Nice looking

@leehomestead3424 Жыл бұрын

Thank you! ❤️

@juditblanquecalvo588 8 ай бұрын

Gracias ❤

@leehomestead3424 8 ай бұрын

You’re welcome! Thank you for watching! ❤️

@bunnidotcom 11 ай бұрын

I find it much faster to add all the posts before taking the earrings out of the mold

@leehomestead3424 11 ай бұрын

👍🏻

@thebrokenmicshow1457 9 ай бұрын

So nice 😊

@leehomestead3424 9 ай бұрын

Thank you! ❤️

@KashmiriCuisine72 3 ай бұрын

❤❤❤ superb

@leehomestead3424 3 ай бұрын

Thank you! ❤️

@KenjaajneK Жыл бұрын

#Proper... well done and done well... thanks for sharing the flow...don't ja know ya know...lol...

@leehomestead3424 Жыл бұрын

Thank you! ❤️🤣

@sheebashara3397 9 ай бұрын

Super sister ❤

@leehomestead3424 9 ай бұрын

Thank you! ❤️

@marisahernandez8606 7 ай бұрын

❤

@angelicatrejo7936 Жыл бұрын

Hi!! I loved your video! 😊 I have a quick question, did you buy the color white or did you make your own white color for the top layer?

@leehomestead3424 Жыл бұрын

Thank you so much! ❤️ I mixed white mica powder into the resin.

@katherinetocock4912 Жыл бұрын

Just gorgeous, can you tell me where you get the tiny flowers please?

@leehomestead3424 Жыл бұрын

Thank you! You can get different ones on Amazon. I will add a couple links for you here: 6 Boxes Dried Flowers for Nail Art, Audab 190 Pcs Nail Dried Flowers Mini Resin Flowers for Nail Art Resin Decoration a.co/d/70vGqOk Natural Forget-Me-Not Dried Flowers Don't Forget Me Dried Flower Real Dried Pressed Flowers for Jewelry Candle Card Making DIY Resin Ornaments Nail Art Flowers Decorations (200 Pieces) a.co/d/gXp2Ekh

@HeavenLeeMadeOnEtsy 7 ай бұрын

did you make the earring cards? I have been searching for something similar for about a year. lol. I really like how your earring cards are. Great video

@leehomestead3424 7 ай бұрын

Thank you! I bought them from Amazon, but unfortunately the seller stopped selling them. :(. I will have to switch to a different one when I run out.

@izabeads Жыл бұрын

Beautiful tutorial, many thanks! How do you clean the pipette and remove all resin from it, please?

@leehomestead3424 Жыл бұрын

Thank you! ❤️ They are not reusable. I buy them in a big pack and throw it away when I am done.

@izabeads Жыл бұрын

@@leehomestead3424 Many thanks.

@nishatannk 5 ай бұрын

I love way you say everything in details. Can you please make a video how to price the earrings. Thank you 😊

@leehomestead3424 5 ай бұрын

Thank you so much! ❤️ Here is my recent video on pricing: How much to sell handmade jewelry for and a tour of my craft booth! kzfaq.info/get/bejne/o95kZMqG0J7ZlIk.html

@nishatannk 5 ай бұрын

@@leehomestead3424 thank you 😊

@leehomestead3424 5 ай бұрын

@@nishatannk You’re welcome! Thank you for watching! ❤️

@melissahanscom417 Жыл бұрын

Was wondering why she kept talking about collars and wondering what that could mean? I was half way into the video and realized she was saying colors!! 🤣 Oh my goodness. They look cute girl!

@leehomestead3424 Жыл бұрын

That’s my Appalachian accent coming through. 🤣. Thank you!

@renesalinas1029 Жыл бұрын

Do you have links for earring studs and the cardboard holders? Great job btw!

@leehomestead3424 Жыл бұрын

Thank you! ❤️ Cardboard holders: The ones I use are currently out of stock, but here is an option for a set of two. Kraft Paper Jewelry Display Cards for Earrings, Necklaces, Studs (2 x 2 In, 200 Pack) a.co/d/8d3WAbd Studs: Earring Posts and Backs, Shynek 1800pcs Earring Making Supplies with Stainless Steel Earring Posts and Earring Backs for Studs, Earring Making Kit for DIY Earrings and Jewelry Making a.co/d/dgf8zTJ

@AussieMumVLOGS 3 ай бұрын

Wow 20:17 i would love to make my own earrings and what i like! Also very good last minute Christmas present for co workers, teachers, family members! I wouldn't tell people i made them id pretend i purchased from the store hahah. Where do you buy the pretty flowers and moulds from?

@leehomestead3424 3 ай бұрын

Yes! I love to give them as gifts! ❤️ As an Amazon Associate I earn from qualifying purchases. I will provide the links for the flowers and mold I used: amzn.to/49TkxO8 amzn.to/49yUQCB amzn.to/3P6PSoC

@hamsterlp0372 Жыл бұрын

Hi there! They look gorgeous. I was just wondering where you got the studs from since I didn't find the link in the description?

@leehomestead3424 Жыл бұрын

Thank you so much! ❤️. Here’s the link for the stud backs: Earring Posts and Backs, Shynek 1800pcs Earring Making Supplies with Stainless Steel Earring Posts and Earring Backs for Studs, Earring Making Kit for DIY Earrings and Jewelry Making a.co/d/aOxQXic

@hamsterlp0372 Жыл бұрын

@@leehomestead3424 thank you for the quick response. Happy crafting! ♡

@emilyh5090 Жыл бұрын

Great job curious why not do all Uv resin? Is it due to cost?

@leehomestead3424 Жыл бұрын

I’m not a fan of using uv resin in molds. I only use uv resin in bezels and to add the backs to my studs.

@cathyhall7457 8 ай бұрын

I think if you did put the post on the earrings before you take him out of the molds and then put them under the UV light when that make it so that they sit up straighter???

@leehomestead3424 8 ай бұрын

You can do that, but I like to do it this way. It makes it way less likely that I will put too much resin in the mold and have to sand them. I can control it better this way. But, yes you can do it that way.

@patsyjoseph5375 4 ай бұрын

I watch all your videos and really like them because you always explain the process, i did notice in this video you are using multi-colour foil i cannot get hold of, can you please tell me where i can buy the foil?

@leehomestead3424 4 ай бұрын

Thank you so much for watching my videos!! Good luck on your crafting! ❤️ As an Amazon Associate I earn from qualifying purchases. I will give you links to some foils that you can use: amzn.to/3HB9Tzx amzn.to/3w1pYvA amzn.to/48UtbMc amzn.to/3HDGu7G

@unidiary8935 8 ай бұрын

Nice work.❤ I love this..send how to get this mold. In Sri Lanka

@leehomestead3424 8 ай бұрын

Thank you so much! I’m an Amazon associate so I will give you the link to the mold I use. amzn.to/46zf6CB I’m not sure if Amazon ships there or not.

@angelcrafterananya 6 ай бұрын

Very nice work...❤ Where to get these moulds??

@leehomestead3424 6 ай бұрын

Thank you so much! ❤️ As an Amazon Associate I earn from qualifying purchases. I will provide the link to the mold I used to make these earrings: amzn.to/3vbtbbD

@alidadebruyn36 4 ай бұрын

I bought this mould after watching this video. I regretted buying it, the pieces are tiny and I hate working with the mould so now I use it for leftover resin so I can have my own chunky glass pieces

@leehomestead3424 4 ай бұрын

The mold is tiny because it makes little stud earrings. They are the perfect size for studs. Using a dropper to fill in the mold makes it easier.

@alidadebruyn36 4 ай бұрын

@@leehomestead3424 yes I know, but I’m clumsy so the mould didn’t work for me 😢

@rasi765 11 ай бұрын

I have to ask how are people still working with resin? I'm very fascinated by resin crafts but a lot of people complained that it gave them expiratory problems in no time.

@leehomestead3424 11 ай бұрын

I use a respirator and gloves when working with resin.

@cathyhall7457 8 ай бұрын

I think as long as you use a respirator and gloves and wear long sleeves and you are in a very well ventilated room then you are fine with resin....

@queenofsheba8275 8 ай бұрын

And gogles as well to protect your eyes

@chantalbougie5652 3 ай бұрын

Merci beaucoup pour ce vidéo et les liens pour acheter ce qu'il faut pour les faire ❤ , je n'ai pas vu le lien pour les petites cartes de présentation pour vendre ! Est-ce que c'est sur amazone aussi pour ces cartes ?

@leehomestead3424 3 ай бұрын

Thank you so much for watching! ❤️ Unfortunately, the cards are no longer for sell on Amazon. I’ve had to switch the cards I use currently.

@specialk8927 Жыл бұрын

I just worry about the resin getting thick by the time you put flowers in each

@leehomestead3424 Жыл бұрын

It can if you don’t work fast. Start with smaller batches until you get the hang of it.

@diegooland1261 Жыл бұрын

Another great video, awesome job. I make my own earring cards. If you don't mind my asking, how do you price these? When it comes to resin I find it really hard to figure out some sort of resource + time analysis for a price.

@leehomestead3424 Жыл бұрын

10 dollars is a good price. It depends on the area in which you live as well. I hope this helps!

@diegooland1261 Жыл бұрын

@@leehomestead3424 thanks! that sound about right for where i am.

@leehomestead3424 Жыл бұрын

Good luck! I hope you have success with them! ❤️

@rudyb1863 Жыл бұрын

Good day Lee.. Rudy here from South Africa.. May we ask if its possible to share and advise where you buy and get your 3 rows of 2 hole earing display card boards. We not getting any distributor in South Africa. Regards. Rudy Botha.

@leehomestead3424 Жыл бұрын

Hello! Thank you for watching! The earring cards I currently use are out of stock, but here is another good option for a set of two. They are from Amazon.com: www.amazon.com/Kraft-Jewelry-Display-Earrings-Necklaces/dp/B07FQHNJGG

@starrspoter Жыл бұрын

why do u have to wait for them to dry before the next layer? wont the resin just sit on top over the flower

@leehomestead3424 Жыл бұрын

The colored resin will mix with the clear resin and you won’t be able to see the flowers.

@enricolambrusco2449 10 ай бұрын

I like the idea of putting three pair on a card but I was wondering if your customers bug you to change the three choices. I usually do art fairs. I don’t sell online.

@leehomestead3424 10 ай бұрын

They do ask to change the earrings occasionally and I let them.

@christinaheeg 9 ай бұрын

where can I buy your earrings?? I love them! Do you have an Etsy shop?

@leehomestead3424 9 ай бұрын

Thank you so much! ❤️. I did have an Etsy shop and they charge ad fees for every click and you can’t opt out of it, so I took it down. I wasn’t getting enough orders on there. I mostly sell them at festivals and by custom order now.

@judyeuller7602 Жыл бұрын

These are lovely. How much do you sell them for?

@leehomestead3424 Жыл бұрын

Thank you! ❤️. I would recommend selling them for around 10 dollars, depending on where you live.

@judyeuller7602 Жыл бұрын

@@leehomestead3424 thanks!

@marie4629 Жыл бұрын

Hi. Just to have an idea what price range would you sell each set?

@leehomestead3424 Жыл бұрын

I think 10 dollars is a good price, but it really depends on the area you live. You could start with that price and adjust it to see what works best for your area.

@Reretabell Жыл бұрын

The 1's with the Flowers are the Most Beautiful out of ALL of them! I would strickly stick with Flowers! Because the other 1s aren't as unique or natural or pretty.. their just very common you know? Flowers are Classic.

@leehomestead3424 Жыл бұрын

I sell them all quite well, but thank you for your opinion. Thank you for watching!

@handcraftedbydiana Жыл бұрын

It seems like a lot of work for only $8 for a 3 set of stud earrings? I only make things and sell locally, can you tell me what earring cards you used? Thank you for sharing your process.

@leehomestead3424 Жыл бұрын

You can make a lot at a time, with minimal materials, so it makes it worth it. The earring cards I used in the video are currently out of stock.

@rudyb1863 Жыл бұрын

Where can we purchase the molds from you using?

@leehomestead3424 Жыл бұрын

Thank you for watching! Here is the Amazon link for the molds in this video: Cabochon Gem Jewelry Casting Epoxy Silicone Mold Triangle Oval Dome Teardrop Square Heart Round Irregular Stone Shapes, for Polymer Clay Craft, UV Resin Pendant Earrings Making, 2 in Set a.co/d/6n4zNvc

@the.resintist Жыл бұрын

Very nice but link to mold or source would be nice 😉. But now a new follower ❤️👌🫶

@leehomestead3424 Жыл бұрын

There are links in the description. Thank you for watching!

@dariddro8111 9 ай бұрын

Can it be ordered? In Bangladesh

@leehomestead3424 9 ай бұрын

I don’t sell my products online currently, but I might in the future. I believe Amazon does ship items to Bangladesh. You can go to their site to find more information and contact their customer service.

@texasmarshalls 7 ай бұрын

Just curious why you did use UV resin for this project?

@leehomestead3424 7 ай бұрын

You can use it, but when I color my resin I prefer to use the resin that sets overnight. I normally will only use clear uv resin with no mica powder in it so that I know the uv light is curing all the way through. That’s just my personal preference though.

@stephme2686 Жыл бұрын

Are you saying collar or color? I’m not being nit picky I’m just thinking maybe it’s called that because it’s the back? Idk lol I know nothing about this stuff so I’m curious 😂 I want to try making this

@leehomestead3424 Жыл бұрын

Color. I hope it works well for you.

@DoloresGallego-gd7dl 2 күн бұрын

Hi these are so cute.❤Can you tell me please what are those materials youve been use😊?

@leehomestead3424 2 күн бұрын

Thank you for watching! I have all the materials I used to make these earrings linked in the description of the video.

@DoloresGallego-gd7dl 2 күн бұрын

@@leehomestead3424 oh thank you.I hope i can start also my own.Thank you for this tutorial vid.

@leehomestead3424 2 күн бұрын

@@DoloresGallego-gd7dl You can do it! ❤️

@carried3741 Жыл бұрын

Where can i buy this mold tray?

@leehomestead3424 Жыл бұрын

It’s the small mold in this set. I hope this helps. Thanks for watching! Cabochon Gem Jewelry Casting Epoxy Silicone Mold Triangle Oval Dome Teardrop Square Heart Round Irregular Stone Shapes, for Polymer Clay Craft, UV Resin Pendant Earrings Making, 2 in Set a.co/d/0d59lXx

@chechecollections 4 ай бұрын

Please can you list out the items you used im actually a beginner and i want to make order from jumia but i don't know the name of the items

@leehomestead3424 4 ай бұрын

I have them all listed in the description of the video along with links to where you can buy them from Amazon.

@LIFEsrilanka101 4 ай бұрын

How did u create the white resin?

@leehomestead3424 4 ай бұрын

I mixed in white mica powder. As an Amazon Associate I earn from qualifying purchases. Here is a link to the mica powder I use: amzn.to/3Uz9wNC

@farialmab4723 Жыл бұрын

If it takes you up to an hour, how do you deal with the 30-45 minute pot-life of resin?

@leehomestead3424 Жыл бұрын

The resin is already in the molds so the flowers can sit on top of it if it has to. There will be more resin pored on top of it.

@leehomestead3424 Жыл бұрын

I hope it works out for you! I’m glad you want to try it! Thank you for watching!

@clarabaronadegalindo5396 18 күн бұрын

How add the mico powder and how much do I have to use?

@leehomestead3424 17 күн бұрын

Once you have your resin mixed just add a little bit at a time until you have the color you want.

@fedrasdesigns7 8 ай бұрын

Where did you buy those molds?

@leehomestead3424 8 ай бұрын

As an Amazon Associate I earn from qualifying purchases. I will provide the link to the mold I used: amzn.to/3RC8XB7

@k.dowers6803 Жыл бұрын

Hey Lee! Hope this isn’t offensive but I notice an accent when you say “color,” & I knew a guy from Arkansas who always said color that way, like the word “collar.” Is that a southern thing to say it that way? 😄

@leehomestead3424 Жыл бұрын

I’m from Appalachia and a lot of us say it like that. ;)

@MooncieLoo 2 ай бұрын

Do you have a place where you sell these?

@leehomestead3424 2 ай бұрын

I sell these at craft shows and a craft mall.

@planktonn5390 Жыл бұрын

Is this your full time job? Im asking because i want to start doing this but to me it feels like u cant make a living off it, or can you? Please answer❤

@leehomestead3424 Жыл бұрын

This is definitely not my full time job. It’s more of a hobby that I do for fun. I sell them so I can make more.

@iqrahashmi9487 7 ай бұрын

How much it take times to dry or set any thing after using uv resin??

@leehomestead3424 7 ай бұрын

When using UV resin is sets under the UV light. So it doesn’t take overnight like regular resin does.

@iqrahashmi9487 6 ай бұрын

@@leehomestead3424 thank you ☺️

@mybabybunnies330 6 ай бұрын

This mould link plz..?..

@leehomestead3424 6 ай бұрын

As an Amazon Associate I earn from qualifying purchases. I will provide the link to the mold I used: amzn.to/3NKLKd4

@sravanisravani1588 5 ай бұрын

So nice nd cute 🥰 mam.. i just want to know one thing from you mam where do u sell all these ear rings mam nd price can u share with us mam

@leehomestead3424 5 ай бұрын

Thank you! ❤️. I sell them at a craft mall and the prices are 10 dollars. The price really depends on where you’re selling them, how much time and money you spent to make them.

@sravanisravani1588 5 ай бұрын

Mam I want to know about resin art can I get ur mail id.. mail id is safe right so if you don't mind can you please give me i don't know how to connect with you

@shobanasubramaniam1006 3 ай бұрын

Can I keep over night instead of UV light?

@leehomestead3424 3 ай бұрын

If you’re using UV resin it will only cure under a UV light. You can use epoxy resin and let it cure overnight though.

@shobanasubramaniam1006 3 ай бұрын

@@leehomestead3424 thanks for the reply 🙏

@leehomestead3424 3 ай бұрын

@@shobanasubramaniam1006 You’re welcome! Good luck in your crafting! ❤️

@debrajensen7440 3 ай бұрын

How is your resin not hardening? It's taking a lot of time to make all those earrings, right? Or are you using UV resin? ❤ ❤❤

@leehomestead3424 3 ай бұрын

I’ve had a lot of practice so I can get them done pretty quickly. You can use UV resin or if you’re using epoxy resin you can do it in smaller batches so it doesn’t start to harden too soon.

@debrajensen7440 3 ай бұрын

@leehomestead3424 the earrings were beautiful!

@leehomestead3424 3 ай бұрын

@@debrajensen7440 Thank you very much! ❤️

@pathowell2807 4 ай бұрын

how much do you sell them for? having trouble pricing my work!

@leehomestead3424 4 ай бұрын

I have a video on how I do my pricing. Here is the link: How much to sell handmade jewelry for and a tour of my craft booth! kzfaq.info/get/bejne/o95kZMqG0J7ZlIk.html

@pathowell2807 4 ай бұрын

thank you so much for the reply. going to check it out right away!

@krupapatel5766 6 ай бұрын

How much the price earrings one pair or three pairs

@leehomestead3424 6 ай бұрын

I sell these at a craft booth for 8.50 a set. The price you sell them at depends on where you’re selling them. Check for a similar item in the area you are going to sell at and price accordingly.

@user-wj2oj8te5h 4 ай бұрын

How much the set

@leehomestead3424 4 ай бұрын

Thanks for watching! ❤️ I have a video of my items pricing. You can check it out here: How much to sell handmade jewelry for and a tour of my craft booth! kzfaq.info/get/bejne/o95kZMqG0J7ZlIk.html

@KirstenLeafromItaly 7 ай бұрын

What are those molds called please?

@leehomestead3424 7 ай бұрын

As an Amazon Associate I earn from qualifying purchases. I will provide the link to the molds I used: amzn.to/3FYbkaw

@KirstenLeafromItaly 7 ай бұрын

@@leehomestead3424 thanks! Appreciate you

@neyareis9678 8 ай бұрын

Qual valor sugerido do cartão? 13 , 15 ou 18? Não entendi

@leehomestead3424 8 ай бұрын

I sell these earrings for 8.50, but it really depends on what area you live in and the cost of the products you use.

@neyareis9678 8 ай бұрын

@@leehomestead3424 obg

@suriyaprabhamuthusamy5333 6 ай бұрын

சிலிகான் மொல்ட் எங்கு கிடைக்கும்

@leehomestead3424 6 ай бұрын

As an Amazon Associate I earn from qualifying purchases. I will provide the link to the mold I used in this video: amzn.to/4apPI4M

@vitavi2800 3 ай бұрын

For 45min!????😮

@leehomestead3424 3 ай бұрын

👍🏻

@gina248 Жыл бұрын

U put your UV resin under the light for 45 minutes? That’s a really long time. It only takes like 5 minutes lol

@emiinglis8029 Жыл бұрын

She said 4-5 minutes

@leehomestead3424 Жыл бұрын

4-5 minutes

@gina248 Жыл бұрын

@@leehomestead3424 ohhh haha it sounded like 45 haha 😂

@gina248 Жыл бұрын

@@emiinglis8029 lol I totally thought she said 45 😂

@leehomestead3424 Жыл бұрын

@@gina248 My accent might have came on a little strong in that part. 🤣

@leenaavidhyaD 8 ай бұрын

Very cute

@leehomestead3424 8 ай бұрын

Thank you! ❤️