Resistor SMD Code

Рет қаралды 404,380

Күн бұрын

For more information, visit www.resistorguide.com/resistor...
Because of the small size of SMD resistors, there is often not room for the traditional color band code. Therefore, the resistor SMD code was developed. In this video you learn in 3 minutes how to read the most common resistor SMD codes: the three and four digit system and the EIA-96 system.

Пікірлер: 78

@seannot-telling9806 6 жыл бұрын

Thank You. You made the most sense so far in just about 3 minutes.

@Layoric1 6 жыл бұрын

what is value when resistor is marked "3k60" ???

@mrbritcoinnakamoto2793 5 жыл бұрын

thanks one question does it matter wich way the currant flows through them ?

@nor4277 7 жыл бұрын

Will our multimeter's read these resister directly,or do we need smd fweezer meter, or how about scr meters,which is best to test these resistors with anyone

@dardofortunato7444 6 жыл бұрын

Hola, muy buena información. Consulta tengo una resistencia smd con el siguiente código x10? Como no trataron este código querría saber si es de 10 0 de 100 ohms. Saludos

@Fireloop77 7 жыл бұрын

Perfect explanation, thanks!

@dcpowered 4 жыл бұрын

Excellent! Informative and short video. Thanks!

@pocoace5415 7 жыл бұрын

wow this is so important detail thank you for uploading this it really helps my assignments

@agstechnicalsupport 5 жыл бұрын

Resistor SMD codes and code schemes very well explained, thank you !

@jamalforest1993 3 жыл бұрын

dunno if anyone gives a damn but if you guys are stoned like me during the covid times then you can watch all the new series on InstaFlixxer. Have been binge watching with my gf for the last couple of months xD

@mekhigary3241 3 жыл бұрын

@Jamal Forest definitely, been using instaflixxer for months myself :D

@vaibhav9as 6 жыл бұрын

You are best in terms of giving content

@samisulaiman7967 4 жыл бұрын

thanks how to know the difference between MSD capacitors and MSD resistors if they have no letter or number how to know if these parts are broken how we know the value of them , I have similar MSD capacitors and resistors on mini STB powered by 12V and I found 2 are broken but I didn't see any number on them any help where can I buy them thank you very much

@seanvgmusic3630 5 жыл бұрын

Very helpful and clear! Thank you! :)

@darkote87 4 жыл бұрын

how find 2RD SMD capacitor ?

@williamoseo3277 7 жыл бұрын

Why not put the exact values for easy identification or reading? Just like in color coded Resistors.

@tinnakornphuseedin9296 5 жыл бұрын

What value of 7D0 SMD?

@prasenjitpaul5398 5 жыл бұрын

Sir, what will be value of 0805 SMD, ?

@ZilogBob 5 жыл бұрын

I'm glad I've never encountered that EIA numbering system. Needless overcomplication.

@prasenjitpaul5398 5 жыл бұрын

SIR, what value of 0805 SMD ??

@MarsKheyga 4 жыл бұрын

47-16L (2) BD diode or resistor or capacitor...????

@damontellegen3569 4 жыл бұрын

Fantastic job

@dandemir5893 3 жыл бұрын

I saw some resistors have not any code. So how can I find code for them ?

@13anomalous16 5 жыл бұрын

what if the resistor doesn't have a code or any other letters

@RB-nh8ui 4 жыл бұрын

Me gusto por claro como saber los ohms de las resistencias superficiales de precisión..

@jozsiolah1435 27 күн бұрын

The smd resistors can be calibrated, but must not be removed. Power banks calibrate the 200 and 000 types. The trick is solar charging or and car charger (5.8v). The calibrating may take for weeks. Doing this, a car user can benefit using a power bank, while others will not be able to use it with higher capacity and faster charging. Calibrating to5.8 v will be better at 5.0 v as well, and the supported best charger is Samsung or Apple.

@coondogtheman 5 жыл бұрын

I have a backlight inverter from an LCD TV and it has a slight burn mark on the back of the inverter board, on the other side there are four resistors with 0's on them and one looks burned. They are all connected to the same trace. Would it be ok to bridge that part and bypass those resistors? I'm assuming that the 0 on the resistors means no ohms of resistance which is basically like direct connection. I was going to scrape the trace which are thick and solder a wire onto them and connect the two.

@affapple3214 Жыл бұрын

I think yes it would be okay, 0 ohm resistor normally is used as a bridge itself, and normally it wouldn't bring a problem if you substitute it with a wire, but take this with a grain of salt

@coondogtheman Жыл бұрын

@@affapple3214 I did that and the TV did the same thing. Still chasing this issue.

@mdmahmood3030 6 жыл бұрын

sir how to check 10k resistance

@sido2335 7 жыл бұрын

Good job

@leon-fg9lb 2 жыл бұрын

Big Thinks 🙏🏻♥️

@hafizahmad5036 3 жыл бұрын

01c and 30c how read method plz tell I waiting your reply.

@ManiaDepre 9 жыл бұрын

What does L35 mean on a SMD fuse?

@Sm0rezDev 8 жыл бұрын

I think it's mean amps it can handle.

@zico3239 9 жыл бұрын

what is the value for 183 with underline ?

@Jonas_Meyer 8 жыл бұрын

+underfloor heating installer 0.183 Ohm. I only refer to this video. To be sure i would check the datasheet of the resistor.

@DjRicolaz0328 2 жыл бұрын

Thank you sir for sharing your vedio.. God bless.

@franciscomaldonado3903 3 жыл бұрын

muy buena información aunque un ya tenga conocimiento sobre esto siempre hay cosas que todavía uno no sabia

@m-luthfi Жыл бұрын

So 103 and 1002 basically same, right?

@zahidmehdi4290 7 жыл бұрын

331???

@Bonjour-World 5 жыл бұрын

Excellent. Thank thee :-)

@MLS.22 5 жыл бұрын

and the t code ?

@rcgo2411 3 жыл бұрын

Thank You!

@hellopandit9 5 жыл бұрын

thank you

@Mehrunes86 2 жыл бұрын

Thanks for the video. I need to change a smd resistor, code R050, is 0,05 ohm.

@djemorekcuf8304 4 жыл бұрын

nce tutor!!👍👍👍😀

@jhoan29pigar34 5 жыл бұрын

what is the messure of zero smd resistor, it is reversing or infinity when i use a digital multimeter

@Bonjour-World 5 жыл бұрын

Zero ohms. They are sometimes used to "hop" over traces on a singled sided PCB.

@zohaibmalik5940 7 жыл бұрын

nice video

@JACKIEYJACKIEY007 Жыл бұрын

Thanks

@teobaldojimenez7426 5 жыл бұрын

Very well ,......tj. de ecuador.

@amitthakur8802 7 жыл бұрын

sir smd rasitar mospid diod ki pahchan kiase kare

@mrter2011 3 жыл бұрын

thanks

@MARCIO-wi9to 11 жыл бұрын

alguem tradus ai,.

@birendrayonghang8805 6 жыл бұрын

great

@f2tehnik01 5 жыл бұрын

WOWW.... NICE, GOOD, BAGUS, MANTAP....

@vijayanand3218 4 ай бұрын

SMD PTC A How to find out plz sir

@Oldcityeses Жыл бұрын

010 direnç nedir ?

@kelumsenadeera8771 3 жыл бұрын

Good

@alzaabialzaabi 7 жыл бұрын

How to measure 20k ohm ? I got mad

@mother-fng-bonswa3612 6 жыл бұрын

what you mean.. with a multimeter? your ohm should be on 200 K / on 20K it maybe give you until 1999, otherwise 1. on 200 k . 0.200

@deepakangre9307 Жыл бұрын

4digit resister390e

@daniellee6912 8 жыл бұрын

what is a 0 ohm resistor used for?

@RmFrZQ 8 жыл бұрын

+Daniel Lee it will act as fuse.

@VikasKumar-iu7tl 7 жыл бұрын

Daniel Lee

@robertsanchez630 7 жыл бұрын

hi everyone ,if anyone else wants to learn about how to make digital circuits try Sovallo Circuits Expert Fixer (do a google search ) ? Ive heard some extraordinary things about it and my mate got great results with it.

@ZilogBob 5 жыл бұрын

Completing a circuit when a PCB trace has to go underneath it.

@Iulius4 5 жыл бұрын

RmFrZQ Gracias!

@mehdipouresmaeil7964 2 жыл бұрын

hello for this vedio, but 382 O means that 0.328 KOhm not OHM

@thineshraja7145 12 жыл бұрын

thanks for u send with me resistor code dedails

@rcxb1 7 жыл бұрын

You much too quickly glossed over that whole "underlined" thing (and did so after presumably being done talking about 3 digit codes), which can cause a huge error when looking at 3 digit codes...

@gung49 5 жыл бұрын

Why they make it hard, why not just write it "3k1" instead of "312". Who on earth would think "233" means greater than "312"? And if they can write that small, why though hole one still use color?

@d0ugparker 4 жыл бұрын

Excellent. It was exactly what I needed. Thank you. At 1:55, "deviated," the first "e" is long, not short, "dee," not "deh." At 2:25 and other times, "represents," the first "e" is short, "reh," not "ree." Respectfully submitted.

@PlacetecAGLiestal 9 жыл бұрын

Resistor SMD Code

@NGU7754 Жыл бұрын

"SMD" LOL.

@bombshell31600 8 жыл бұрын

lol.......omg sry bud...

@gavincurtis 3 жыл бұрын

That EIA-96 look up table system was designed by a lazy hack outfit. Why have a system that works from memory when it can be replaced with a lookup pocketbook chart instead? Who came up with this garbage? Add a color multiplier band and you have it,