Last of the One-Year Wonders, I haven't worked in Hospital in a few years (DME). Your videos help refresh my memory. Thanks

I'm in a respiratory program and a fellow student recommended this channel, and I can definitely see why, you are great at explaining these concepts ! Thankyou sir !

I am sincerely thankful for all of your videos. I really like how you make the information and concepts easy to understand. Hands down best videos for future and current Respiratory Therapists.

I could never understood these before but thanks to you I can mange and help my patients better 👍👍

Buddy 👏👏you are great at making sense of RT world!

You are a great teacher.

A very big thank you for demystifying the terminology I was struggling with Wish you all the success Carry on

Thank you! Awesome! Best wishes too! An experience I had regarding flow. I received a pt in ICU on a vent, he had a square wave flow, his HR was 133. So I read his lung Hs and he had no lung Hs. So I thought, hm!, in school I learned that a sine way is for normal lungs. I did hear his audible BS laterally. So, following what I learned, I placed him in a sine wave flow pattern. I went to chart near by, and in about 20 min his heart rate turned into NSR in the 70-80 range. Then the nurse said; and I remembered the beep sound of the alarm change, oh! He went into sinus mode! Then I went to the room and it was true. I say this cause I've been reviewing stuff in the net and I find teachers saying that square wave pattern is usually the norm on cycled ventilation. Just wanted to agree that! Thanks again and best wishes!

Absolutely brilliant explanation of theme

I really appreciate this learning

Huge help!

Excellent explanation... thank you so much

I appreciate you so much. Always a fan

Thanks Respiratory Coach

Nicely explained

appreciate you man!

Great coach

What is the difference between BIPAP and PSV mode? In terms of patients with tracheostomy, these two modes can apply to them. while there are differences in the specific terminology and pressure settings between the two modes, the underlying principles are similar. Both modes require patient-initiated breathing, involve the application of positive pressure to assist with inhalation, and provide a form of positive end-expiratory pressure (PEEP).

Thank you! The content you produce is awesome!

Conceptd getting clear thanks a loads! Could u also show these wave forms on a ventilator?

Thank you sir

super coach thanks

Do you have or can you do a video on peep compensated and peep non compensated ventilators, and explain what you have to do to adjust when switching ventilators ? Thank you

Could you please explain how to keep the Plateau pressure

Very informative lectures and you are a very gifted teacher .I am a paediatrician and been following your channel recently ,any video training regarding neonatal ventilation ?

❤❤❤

Hi Thank you for this illustration I have a question: if pressure support added above the PEEP why in pressure time scaler we reached 10 instead of 15 the sum of PS and PEEP

Very nice

Joe, can you go into detail with IVAPS?

Hi! I'm trying to understand the cycle mechanism being flow decay and not pressure in pressure support. Would the pressures delivered vary as well? If the cycle mechanism is flow decay and not pressure, is it possible that the pressures reached would vary? I hope that makes sense.

So cpap + pressure support = bipap. Cause on cpap with pressure support you can increase TV as well. For example if you have bipap with an Ipap = 10 Epap=5 then PS =5 and it s the same as cpap = 5 and PS of cpap = 5 . So Ipap of bipap = PIP of cpap = 10. Is this false?

I'm a new user so this is all a different language to me, but my IPAP = 12.0 and my EPAP = 4.0 - Is this an OK pressure support. My diagnosis was 50 events/hr but these settings give me typically less than 3 events/hour.

In psv why flow is not change with increase of ps, but vt changes. Flow =vt/I time, is i time increasing with increase of tidel volume in psv. Pls clarify my doubt

What are the maximum values of CPAP/PEEP, PressurtSupport, Peak,Mean and Platue pressures.

sir kindly explain concept of peep compensated and non compensated niv settings in c3 Hamilton

Noice Keep it up

Do we measure pip and mean airway pressure when patients on cpap vent mode? I’ve seen therapists measured. Patients is spontaneous breathing. Let me know.

thank you @respiratory coach i have question , correct me if i am wrong i usually work on drager EVITA XL...and as a routine , i am always activating ATC " Automatic tube compensation" while on SIMV my question is should i add pressure support level LIKE 5-8 CmH2O to overcome artificial airway resistance or ATC alone is enough ? thanks alot

So can I say that CPAP w PS equals to BiLevel ventillation?

Thanks for explaining the concept of cpap and pressure support ventilation. can we call cpap as external PEEP. Can we apply CPAP to those who have obstructive airway disease as these patients have already increased FRC. Thanks Dr Anwar Ali from Pakistan

What happens when patient develop pneumothorax in CPAP/PS mode.?

Is it okay to use the mode S/T on the trilogy home vent which has a IPAP and EPAP setting on mechanically ventilated tracheostomy patients

When you refer to baseline are you talking about pressure?

May I know a ventilator that has a CPAP mode for intubated patients? And what does it settings look like?

Why wouldn’t you increase the I pap first for the second gas? Most doctors wouldn’t intubate with a gas like that before adjusted the bipap settimgs.

Sir if pt is on psv mode,nd his abg is ph 7.36,pco2 of 57 hco3 38with rr of 14 fio2 -70,ps of 12 wat setting 2 change in above senario?

CPAP with PSV =BIPAP???