Restoration Crazy 3-PHASE ac Water Pump With Large Capacity | Restore Electric Water Pump MAX Japan

Рет қаралды 2,511,712

4 жыл бұрын

Restoration Crazy 3-PHASE ac Water Pump With Large Capacity | Restore Old Electric Water Pump Capacity MAX Japan
we received a help request from a friend to repair a large-capacity 3-phase water pump. The electric pump had burnt the motorbike and could no longer function. The pump is too old. It has been seriously destroyed by time. It took us a lot of time to restore it. We have repaired the electric motor. I asked a friend to do the job. It's difficult to restore a large-capacity electric pump. It is quite heavy, its weight up to 100kg. After several days of restoration, we have completed restoring the 3-phase large capacity electric pump. Thank you everyone for watching my video. Subscribe to follow the latest videos.
#Water
#Restoration
#Crazy3-PHASE

Пікірлер: 714

@restorationscrap8829 4 жыл бұрын

Why do people say we are the corona virus? We live in Vietnam and are very healthy.

@torquemada6781 4 жыл бұрын

here in Germany I never heard a connection between Vietnam and the corona virus, so no, people don´t say this here

@user-tf4ut3wx4n 4 жыл бұрын

для русских вы все китайцы, вот и называют тебя "коронавирусом" у них сейчас тренд такой

@GGigabiteM 4 жыл бұрын

Some people don't know world geography and assume everything east of India and south of Russa is China.

@Lesnz2009 4 жыл бұрын

Because they are idiots and racists. Also, because of their two working brain cells, one is lost and the other one is looking for it. Therefore no brain cells left to think properly.😉

@victimovtalent6036 4 жыл бұрын

They are dumb,human and viruses are different thing🤭

@corneliusdrvanderbilt822 3 жыл бұрын

I worked and lived there from 1993 to 1995 ...Before going there I was quite apprehensive and rather prejudiced, due to Vietnam War. Within a month I changed my prejudices to admiration. These people are clean, well organized, thoughtful and very hardworking. They achieve wonders with so few tools. I have great admiration for them. .

@henniebasson515 4 жыл бұрын

Problem - holes in the impeller! Open up again and fill them with welding. Balance in such a machine is very important. Regards.

@godfreypoon5148 4 жыл бұрын

@@emma67890 Nailed it.

@lifeisgood5619 4 жыл бұрын

@@emma67890 hmmm

@GilB561 4 жыл бұрын

I watched the whole thing just to see how the holes in the impeller would be filled back in. Spoiler alert. Nope! Seems like a lot of work for a pretty boat anchor.

@malvoliosf 3 жыл бұрын

Yup, that just looks wrong.

@kurdihermawan5113 3 жыл бұрын

for submersible pump, any hole in the impeller is not so serious because the head of this pump is not high, maybe only its capacity slightly lower than before

@patf2444 2 жыл бұрын

Dude how do you know how everything goes back together??? AMAZING!!!

@runner19781978 4 жыл бұрын

Everyones commenting on the impeller. The guy is rebuilding it with hand tools only. He did what he needed to do to separate the impeller. No room for a puller in there and he tried heat. I doubt he has a welder available to repair the holes. You just have to make do to get the item working again with what you have available. It's an old cast iron pump, I doubt cavitation is a huge worry at the speed that thing will be running. I think he did a good job with the resources he had available to him.

@arrnaros641120 4 жыл бұрын

masilla epoxica

@JohnDoe-bd5sz 4 жыл бұрын

There would be a posibility to drill and tap those holes, and subsequent grinding to close those holes. Impeller blade would still need balancing after that though.

@kenmunford4971 4 жыл бұрын

it's a third world answer to the problem and you got to take your hat of to them for imagination and ingenuity. the armature would have been rewound at a local shop who specialises in rewinds. still i would like to know what the bubbling liquid was for, degreaser ,caustic ?

@DrMGomezJr 2 жыл бұрын

Great job...made it look simple...

@2ndchances542 3 жыл бұрын

I like the use of seemingly very used and neglected assortment of tools he uses. Minimalistic

@adriana.B58 4 жыл бұрын

Restoration Scrap, es asombroso como recordás donde va cada una de las piezas en un artefacto que tiene tantas piezas. Sos admirable.

@joeylawn36111 3 жыл бұрын

As far as the holes drilled in the impeller: Before: Over 50kg of scrap metal; After: A working pump. Good Job!

@RODALCO2007 4 жыл бұрын

I enjoyed watching this repair video. Well done. Great to see old failed equipment repurposed again, instead of thrown away and replaced with new.

@andresperez9513 3 жыл бұрын

Excelente ! Muy buen trabajo y con muy pocas herramientas , evidentemente no es la primer bomba de agua que arregla 👍🏻👍🏻

@ailtonpereirarocha4914 3 жыл бұрын

Você é um gênio amigo!

@DENRICH 4 жыл бұрын

Хвала рукодельникам! Мощная помпа получилась!

@lh-cl8kg 2 жыл бұрын

пзц крыльчатку разбалансировал.

@edsongoncalves1773 3 жыл бұрын

Parabéns Deus abençoe vc , que recicla e proteje o meio ambiente parabéns.

@lpkendolol1481 3 жыл бұрын

Excelente muchas gracias

@orchidlove-kz2ky 3 жыл бұрын

picking up goods. I'll repair the pump and make a new one. The workmanship is amazing.

@danielsevilla2273 4 жыл бұрын

Love seeing this man working his magic. I’m a fan. I just wonder how he dispongo of so many contaminants. Some seems that go straight to soil. But, a big fan of this channel

@Hunterboy281 4 жыл бұрын

That impeller is going to cause havoc with those holes in it, it would have lost its balance and the vibration is going to sing a song !!! No clearance done 🙄 ..

@CartoonistKadus 3 жыл бұрын

These guys are crazy! They can fix almost anything! I enjoy watching their videos.

@georgebrown8312 2 жыл бұрын

Splendid job restoring the water pump. You got working like a charm again. Great work.

@user-ht9hb2sd4x 4 жыл бұрын

Баланс и вибрация ему не знаком. Бесполезный ремонт!

@kameranlhoni410 4 жыл бұрын

You did a great job, However I think you should close the 2 holes you drilled into the propeller, in order to pull it out using the puller. These 2 holes will cause undesirable turbulence that will reduce the performance of the pump. they could be very easily closed by epoxy. Thanks again for you clean job.

@andymeadows9285 3 жыл бұрын

And it was a balanced impeller if you look at the precision drill holes. It’s not Balanced now

@saulveiga5644 2 жыл бұрын

Sus manos son el terror de las maquinas mil saludos des de mi ESPAÑA

@user-vj1io7ly7y 3 жыл бұрын

I’m mechanical technician and I watched this video until <a href="#" class="seekto" data-time="631">10:31</a> i realized that this gay is still learning and new. A lot of mistakes are made such as drilled the impeller, pulled the mech seal by bearing puller even though he don’t see there is luck washer this method might be damage the stationary seal. But i love it and by the time I’m sure he will be good mechanic.

@user-ym8cb3ou8q 4 жыл бұрын

Да работы много...сколько реально ушло времени ? Молодец!

@bobbywright2100 3 жыл бұрын

That impeller it is not going to be balanced anymore due to the holes drilled in it. And that crack or cut in it that was made to get it off the shaft easier it’s going to be a big problem I would’ve gotten a new impeller that pump will fail pretty quick because it’s gonna wear them bearings out in just a matter of a short time

@user-yc1gr5pd8o 2 жыл бұрын

برافو ممتاذ تسلم يدك

@abidinmusleh9113 11 ай бұрын

They are hard working people.

@Scratchingforcash 4 жыл бұрын

Wait, did you fill the holes in the impeller? I most have missed that part, if you didn’t it is going to end up vibrating something fierce and eventually it will be ruined. I suggest take her back apart and fill them possibly with a weld but watch the weight, that is where your problem Will occur.

@chriscarbone4956 2 жыл бұрын

And then I think he ran it dry. When he was putting the plastic bag over the discharge.

@Saputroslife 4 жыл бұрын

good job man !! Thank you

@AndyHayes1 4 жыл бұрын

I love how he uses a crescent wrench for everything. I’d love to see this kid get some nice tools so he can keep doing what he’s doing. Did you see his screwdriver. AMERICA! And everyone worried about the holes he drilled in the impeller. Do you think he is rebuilding this to supply sterile water to an orphanage? That is a sump pump for waste water. He’s cool leave him be

@shannondriscoll3045 3 жыл бұрын

I agree. Should've welded the drill hole son the impeller. Other than that, great job!

@pangtsr 3 жыл бұрын

You are why democracy fails :)

@kurdihermawan5113 3 жыл бұрын

agree, and sometime impeller needs holes to decrease the axial force when the pump running

@sashakrasnoyarsk 4 жыл бұрын

Продырявил 3 из 4 лопасти крыльчатки, молодец!

@KARVAC 3 жыл бұрын

Была балансировка... ну её нафиг!

@kimteam5344 4 жыл бұрын

wonderful~!!

@urbart1935 4 жыл бұрын

My favorite part was banging the "New" bearings on with a hammer!

@PateaPatea 4 жыл бұрын

Come on don't like self

@GilB561 4 жыл бұрын

I hope he remembers to mention the impeller with holes in the eBay ad. I can see it now... Beautifully rebuilt pump starting $1, non refundable shipping $2000.

@isaiaspereirapr 4 жыл бұрын

Bom trabalho essa bomba é bruta mesmo

@justinstergar6757 4 жыл бұрын

Someone get this man an impact!

@AndyHayes1 4 жыл бұрын

Justin Stergar hell yeah that’s what I’m saying. You see he did all that with a crescent wrench, masons hammer and a screwdriver that had an American flag on it. Imagine if he had better tools haha

@josecarlos7082 4 жыл бұрын

muito profissional pra restaurar tem que conhecer desmontar e montar se não monta errado ou não consegui montar parabéns

@abderrahimhaddanitankioupr9367 3 жыл бұрын

TANKIOU profeseure

@StefanDembowski 4 жыл бұрын

Great work! 👏👏👏

@rman5033 4 жыл бұрын

Great job the shorter the wire brush got the faster it worked God Bless

@user-fo4pk9vf8z 3 жыл бұрын

Молодец Хорошая работа..!!

@timmayer8723 3 жыл бұрын

First generation Tools. I'm 77 and these were the sort of tools I used when I started mechanical restoration when I was 14 years old. Lots of disassembly techniques that worked. Not sure I would want to handle a sewage/bilge pump.

@user-cq2iv6pb9i 3 жыл бұрын

tsurumi pump!! very good!!

@sergioxavier5363 3 жыл бұрын

Perfect service has only one however when adjusting and finishing services with bearings, you cannot use a hammer, but a piece of wood or an aluminum bar. But the job was perfect, congratulations I'm from Brazil

@abdo-hr9jr 4 жыл бұрын

He used very simpl tolls and he did very good job Really very good quality 👍👍👍

@kenroman2977 4 жыл бұрын

I LOVE watching these guys. THEY bring THINGS BACK TO LIFE

@bhriguman 3 жыл бұрын

not all things done well, his restaurant could be better i think

@user-ex4mt2zs5z 3 жыл бұрын

この水中ポンプと同じ型のものを20年以上使っています。大きさもほぼ同じです。表面は錆でひどい状態、たまにペンキを塗ってます。田んぼの用水確保に半年間、川につけっぱなしです。すごいですね！さすがプロ！最後に気が付きました。ポンプの横にオイルを入れるねじ穴があるのを。なんと、今まで入れたことない！汗、汗、、、

@tchellosilveira 4 жыл бұрын

Great work !!!

@ramiruhig5558 4 жыл бұрын

you did a great job on that old water pump

@carsstyling 4 жыл бұрын

Ахутельно👍

@tpaudio3169 4 жыл бұрын

Ae vn làm view nc ngoài ghê quá !!

@The-Ordinary-Man 4 жыл бұрын

Imagine what this guy could do if he had an actual shop, with the proper equipment... the mind boggles.....

@gteaz 4 жыл бұрын

Read the comments. I wouldn't let him near anything of mine.

@EDENIO1000 4 жыл бұрын

@@gteaz Es indudable que el muchacho tiene talento. Con pocos recursos mira todo lo que ha hecho.

@vladimerdarjania7157 4 жыл бұрын

Very good Restoration.

@wileycoyotesr8623 4 жыл бұрын

You worked hard for take apart. Very nice job all around.

@Shawn_the_Protogen 3 жыл бұрын

That is a massive water pump, wonder what he is gonna use it for.

@joseluisquispecollazos2065 4 жыл бұрын

DEL PERU BUEN TRABAJO, PARA SCRAP. SALUDOS

@quockhanh2357 4 жыл бұрын

Các bạn giỏi quá 👍

@451-f6 4 жыл бұрын

Сразу видно - "Мастер" подшипники молотком усаживает, в отбалансированной крыльчатке дырок насверлил и не заварил.

@ri.plashov 4 жыл бұрын

Спасибо что написали свой коммент , а то я уже чуть было не потратил в пустую 26 минут своего драгоценного времени на этот видос )))

@alan_a_1975 4 жыл бұрын

ещё и провода на скрутку от руки навязал, зеркала краской покрыл под герметик 😄ппц !!! этот насос на второй день развалится от вибрации и ещё коротнёт... не дай бог кого током пришибёт... таким бы "мастерам" руки в то место запихать откуда они растут... 😄

@user-ry9sv8nw7o 4 жыл бұрын

ну за то покрасил;)

@ezzarmahessa9551 4 жыл бұрын

@@alan_a_1975 .JakGTA

@xdamir79 4 жыл бұрын

Вибрации не будет, примерно равномерно просверлено. Вот КПД насоса из-за дырок немного снизится, но сильно не должно. Подшипник он бил по внутреннему кольцу, ничего не будет. Видать этого давления им хватает с запасом, поэтому и не заморачивался насчет дырок.

@diegoluciano1428 4 жыл бұрын

Tendrías que haber rellenado y balanceado el impulsor. Saludos de Argentina

@lkmayhew9390 4 жыл бұрын

A job well done!

@bradgray123 4 жыл бұрын

Some primo butchery there. Good effort

@rudybriskar5267 Жыл бұрын

Bravo! Amazing what you accomplish without a hydraulic press and a sand blaster!

@impactenglishclasses1611 3 жыл бұрын

Gajab ki hardworking Love from kota rajasthan

@jesikaputri8493 4 жыл бұрын

Bagus Saya suka.

@user-by4dz9bt4h 4 жыл бұрын

BRAVO Very Goot

@thomasyarb2520 4 жыл бұрын

Excellent re-build. Enjoyed the video.

@porkchop6257 4 жыл бұрын

Penetrating oil only works if you give it enough time to do its job. Great video and great job.

@user-ev5vg7tw3c 3 жыл бұрын

Дырка на помпе уменьшается эффективность

@magnum8264 2 жыл бұрын

Just think what you could with workbench,vise and decent tools my friend!

@paulfellows2094 11 ай бұрын

brilliant job nice restoration

@Cradley684 2 жыл бұрын

Excellent restoration friend & Stay Safe !!!.

@PeterMultyGaming 4 жыл бұрын

great video! i would suggest you to do an anti-rust treatment tho, you never know what the steel has gone through

@franciscosilviobernardodef6509 4 жыл бұрын

Show de bola, gostei 👍

@lesstime1678 3 жыл бұрын

porque nao compriendes nada de nada nem muito menos de bombas de agua

@krishanabrtn4288 3 жыл бұрын

Great job brothers.love it much.go on

@fernandoangelaford1483 Жыл бұрын

MARVELLOUS JOB !!!!!! THANKS !!!!!!!! JESUS CHRIST IS LORD AMEN !!!!!!!!!

@joer8854 3 жыл бұрын

Excellent painting techniques. I can't really tell how thick you are applying it with it sped up but you hold the can and move around the piece perfectly

@angvantrinh7632 4 жыл бұрын

anh làm tốn nhiều công sức của mình quá

@AR.K.051 4 жыл бұрын

Marvelous work done.... Very very nice.... brother

@donyarger3297 4 жыл бұрын

That impeller with holes, I agree, she’ll vibrate to beat the band! Not to mention the debris that will hand up. It appeared to me it was a residential setting, where did he get 3 phase electric? I was taught to press bearings in and if you had to use a hammer use a plastic or leather dead blow hammer and never hit directly on the bearing but a wooden or rubber block. Never did see him do continuity check on the windings or armature. Poor kid needs a visit from the snap-on tool man.

@user-or7nz5sp8g 3 жыл бұрын

真的太厲害了

@lifeisgood5619 4 жыл бұрын

We need this man when the Terminator apocalypse happens lol

@jimsmitn7569 Жыл бұрын

Very well done!✌️

@me4taki9oh 4 жыл бұрын

Hi,Maybe coil winding Did you place an order with Mr. Electricity?　LOL

@mialmagama 4 жыл бұрын

Dedito para arriva por el trabajo sobretodo con las pocas erramientas que la hiso

@user-he8uz1mn8e 2 жыл бұрын

👍👍👍👍👍

@rickyjuwono8000 4 жыл бұрын

Rip pump impeller

@perrymalcolm3802 3 жыл бұрын

Great job as usual!!

@gabrielfernandofabianellyi9616 4 жыл бұрын

excelente,.perfet

@blascopatrick1739 3 жыл бұрын

Bonjour je suis impressionné avec du vieux matos, que l'on penserez que cela ne marcherais plus! et voila que vous faite des miracles. merci pour cette instant a la prochaine vidéo. je suis de la France et vous de quelle pays êtes vous??

@Moelkhalifa 4 жыл бұрын

good job.thanks.

@thomasmorse6692 4 жыл бұрын

That was a monster. Your grinder was saying "What have you gotten me into this time?". I like the screw driver. I see it is a favorite. Another good job at restoration and good video quality. I enjoyed watching it.

@DIYTRUCKERJAY 4 жыл бұрын

Great job

@TheChube25 4 жыл бұрын

Great job kid!

@blazeykk 4 жыл бұрын

holes in rotor you made and left can cause cavitation and metal erosion. And again wires only tandgled together, no terminals/connectors.

@user-lq2qx4mf9n 4 жыл бұрын

Peace be upon you and God bless this wonderful work I liked a lot and save money and make use of the materials I mean the process of recycling deserves from me five stars artist from a very good luck and I am one of the biggest fans of this distinguished channel I am from Saudi Arabia