Restoration Mixer Table 16-Chanel Mic/Line MACKIE 1604-VLZ Pro

Рет қаралды 795,332

2 жыл бұрын

Thanks for watching, subscribe & share!
Restoration Mixer Table 16-Chanel Mic/Line MACKIE 1604-VLZ Pro
#Mr_Electricity #Restoration #Mixer
► Subscribe to channel: / mrelectricity1111
Please give me your opinion. Where is not good Let me improve.
------------------------------------------
Thank you for watching the video. please support me. Thanks you very much. love everyone.

Пікірлер: 221

@fedgeno Жыл бұрын

This is the same mixer I use at home. It sounds great and has all the options I need. I had to take mine apart and clean the ribbon cables with automotive contact cleaner and it has worked great ever since. I bought it as part of a full used PA package that had quite a lot of wear but I'm happy with the mixer

@soundsistem-masjid-narela174 2 жыл бұрын

Salut dengan keuletan bapak dan di bantu oleh ibu nya 😀🙂 Sukses terus pak semoga Allah memberimu petunjuk dan hidayahNya 🤲

@Tom-zq7lu 2 жыл бұрын

FANTASTIC AND BEAUTIFUL RESTAURATION AND BEAUTIFUL THANKS 👍😀🆗

@nadronco9312 Жыл бұрын

ALSO Love the use of a METER FACE METER. Only way to successfully test these components!!!!!!

@CREPOZOIDLEMORBIDES 3 ай бұрын

BISOUS BONJOUR DE LA FRANCE BIENVENUE JADORE CONTINUER MERCI

@stabilini Жыл бұрын

Nice work, not a fully restoration, buy very satisfying video

@yeagerxp 2 жыл бұрын

Well done 👍👍👍. Thanks for sharing

@nitinwaghmare-xl8ez Ай бұрын

What a great job it's gods gift to you😮😮😮❤❤❤

@akhmadrofiqridho381 2 ай бұрын

Mixser lengendaris meckie

@mukol11 Жыл бұрын

С пробитым пяти вольтовым стабилизатором напряжения, повезло, что ни чего не сгорело на других платах. Ну и повезло еще по-тому, что даже не прозвонил пяти вольтовую линию на других платах на короткое замыкание, а сразу начал собирать. Возни много, а ремонт не сложный. Но далее проверяем все потенциометры на предмет шорохов)))

@user-mk3do4dl7c Жыл бұрын

да это хорошая вещь микшерный пульт управления с двумя блока эффектов стерео

@Bredyrestorations 2 жыл бұрын

Wow! It turned out beautiful. Excellent work, congratulations.

@djkojack5743 2 жыл бұрын

First Board I ever used in Highschool Stage Crew! Wayback !! Our school also had this board on a Bose Cafetorium system we had ! We also would use this board for pep rallies in our gym with 6 JBL Eons and the Bose sub from our Cafetorium!!

@jessusfernades5229 2 жыл бұрын

Só alegria. Parabéns belo.trabaho

@khushiproduction2311 2 жыл бұрын

I love maki mxsar me

@Williamscott99 Жыл бұрын

aaaaah smooth dust and static free sliders. good job 👊

@dmitrykolevatih4692 2 жыл бұрын

Great job! New life for a mixer!

@Vangelismusic1 2 жыл бұрын

Would of been nice if you could explain what exactly you are doing or looking for audio wise, and also what spray and materials that you are using.

@allinalladityan318 Жыл бұрын

I hv worked on this beauty. Really simple and efficient machine

@SARKAZMYCH 2 жыл бұрын

Хороший пульт, довелось поработать на таком

@user-jg4oi5eg2y 2 жыл бұрын

Я работал именно с такой консолью в начале девяностых---прекрасно звучит!В начале двухтысячных отправил старичка на склад,а пять лет назад закупил запчасти(фейдера,потенциометры чутья,кнопки),и полностью восстановил VLZ!!!Сейчас он трудится у друга в кафе на караоке!

@user-qp5ub1bt3z 2 жыл бұрын

@@user-jg4oi5eg2y на пультах этого производителя метла все свои легендарные альбомы записала. Этому старичку не то что в баре - в студии трудиться не стыдно! 16 каналов конечно не много, но для драмсекции достаточно - 8 микрофонов на сквозную запись и 8 каналов на постобработку в основную консоль.

@user-sb6cn8bn2b 2 ай бұрын

A belleza me ade fayuna consola de esta

@ardeachannel 2 жыл бұрын

Yes ..Gogo my friend ...Indonesia.. 🙏👍

@Bill_N_ATX 2 жыл бұрын

I mixed a bunch of live shows with one just like this back in the early 2000s. They were built like tanks. Looks like the power supply caps and voltage regulator failed as they are want to do over time. It was always a toss up which one died first and took out the other. Done right, you’d replace all the caps, especially the ones in the strips but they probably work ok, just might sound a little crunchy.

@themadmallard 2 жыл бұрын

would you say its like one of the best beginner mixers to cut your teeth on, or what?

@Bill_N_ATX 2 жыл бұрын

@@themadmallard , the one you can afford. Mixing boards or desks as our English friends call them, start a 39 bucks and go into the millions for a large recording board. The principles are mostly the same be they digital or analog. At the simplest, it’s just a few channels with tone controls and a fader that adds that channels outputs to the master mix. At the most complex, it’s effects lines, sub mixes, mic minuses, automation, tone, compression, and just about any thing you can imagine doing to a wave form. But at their heart they are used to mix sounds. The one you can afford, or beg to use, is the right one. Mix as much as you can, watch others, and read the theory books. Some of the greatest music ever made was done on a 8 channel mono board. It’s a tool. You have to provide the art.

@themadmallard 2 жыл бұрын

@@Bill_N_ATX well, this one i think is basically a great starter because all the principal features it has that kind of start you on a journey to more complicated boards later, even fully digital boards.

@Bill_N_ATX 2 жыл бұрын

@@themadmallard , if you could get a good used Mackie like this where all the strips worked and the faders were still quiet etc, it would be fine to work and learn on. I did a bunch of live events on one just like it back in the early 2000s.

@dougle03 2 жыл бұрын

@@Bill_N_ATX As a Brit, we call them Audio consoles; only sometimes desks, but mostly just mixers..

@Zogger-Rogger 2 жыл бұрын

Wow! Nice work. 👍

@user-kf1vy1fb1q 2 жыл бұрын

厲害錄音室設備混音

@riccardoceron3872 2 жыл бұрын

Bravo 👏 👏 restauro davvero impegnativo... 😉 Complimenti

@davidw551 2 жыл бұрын

When brushing the circuit board, what was in the cup that the brush was being dipped into?

@rodrigomaca9866 2 жыл бұрын

Eu tenho uma dessa e é incrível a qualidade da mesa de som Mackie

@robertlouissantssants4010 2 жыл бұрын

Um dos melhores mixers

@0liveiranders0n 2 жыл бұрын

I love working with this console. There's one at the company I work for but unfortunately it's not working 100%. Some channels are hissing and only have one working master output. Still her sound is very good.

@landonbrown5295 2 жыл бұрын

I picked one of these up three months ago for under $200. It was in almost perfect condition with everything working an even had the rotopod kit installed. It's my main workhorse for the home studio and I love it

@Shnick 2 жыл бұрын

Digikey carries over 800 sliders

@ivanvelez7668 Жыл бұрын

awesome! Brought it back to life.

@soundmannate2000 2 жыл бұрын

This brings back memories. My first console was one of these.

@johncooper6246 2 жыл бұрын

I noticed during diode check he set his meter for (1K) resistance. Was the (Diode Check) feature not available on that unit - and in checking bias (using his method) what values was he looking for to show good?

@broadexuk Жыл бұрын

I must of recorded over 150 bands and artists on one of these for the Sun Newspaper in the UK, awesome little desk. If you are interested, search for Sun Biz Sessions on KZfaq, there were a load of them ripped from the Sun's website.

@samuelguerrero5113 2 жыл бұрын

Sin duda está consola es una maravilla de la ingeniería en audio y sonido, Buen Trabajo

@XavierEvensen Жыл бұрын

deberias ver una ssl

@waltersalva4627 2 жыл бұрын

Excelente trabajo 👌

@michaeldavid4227 2 жыл бұрын

congratulations great job 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻🇧🇷

@danielbdbe 2 жыл бұрын

hello very good informative video ! what is the composition of your electrical solution cleaning ? is it homemade ? thanks

@martinndaini6610 2 жыл бұрын

Congratulations great Powerful work now

@suffiyanchamp9062 2 жыл бұрын

I Love Sound System

@crossk9125 2 жыл бұрын

Great video!

@julianreverse Жыл бұрын

Wow, you cleaned a mixing console 🤦‍♂🤦‍♂🤦‍♂🤦‍♂🤦‍♂🤦‍♂ Oh, and I've just thrown away one of these desks. 🤣🤣🤣🤣🤣🤣

@patricktuchais7596 2 жыл бұрын

Attaching the regulators to the heat sink before soldering is a better idea to be sure there is no constraints on the PCB...

@kharlashque Жыл бұрын

Растягивать хронометраж до такого времени) Для чего? Чтоб показать, как все кнобы вытаскиваете? Сняли пару, да пропустили... Приходится перематывать...

@davidebollino909 2 жыл бұрын

Complimenti davvero👏👏 Ottima restaurazione👍 Questo mixer lo vendete?

@jcaguilamty 2 жыл бұрын

Thats exactly the model i have AND irá damaged todo, i hope found some one like you to repaired It, but i Will try..thanks a lot

@Theolonius-ov1ij 2 жыл бұрын

Bravo bravo bravo

@robinsutcliffe-video_art 23 күн бұрын

You need a special meter to test ESR and capacitance of electrolytic capacitors. What are you testing on these caps with such a basic meter? Electrolytics rarely fail short circuit. 15:11

@ydwfawwas 2 жыл бұрын

Good nice bossqu

@mohamed_assir 2 жыл бұрын

Great job.

@nadronco9312 Жыл бұрын

My only comment is USE A SOLDERING IRON and not a gun. A gun can introduce voltage that can ruin FETS. I worked for Heathkit for 15 years doing component level repair and it never failed. LOVE THE VIDEO

@pedrohennis1653 2 жыл бұрын

Excellent job 👍

@deen9747 2 жыл бұрын

I'm your fan

@andyracksthecams Жыл бұрын

Crosstalk City!

@ezequiellipovetsky7555 2 жыл бұрын

Só estava suja por fora... Esta mesa de mixagem sempre precisa fazer troca de várias chaves e fader's ou fazer a devida limpeza e isso ele não fez!!!!

@rentalacdangensetofficial7260 2 жыл бұрын

Good job

@robfriedrich2822 Жыл бұрын

Usually nobody would restore a unit like this, it's less expensive to buy another comparable mixing console. But interesting to see, what is possible.

@PJBonoVox Жыл бұрын

Less expensive than what? The basic tools he used?

@user-he8uz1mn8e 2 жыл бұрын

👍👍👍👍👍👍👍👍👍👍

@jamestheradioman Жыл бұрын

Wow! Painstaking work! Impressive. I have a Mackie ProFX12v3 and the USB channel 11/12 fader left channel drops out and crackles. I have to pot it up to full max to get both channels to read on the VU meters. And sometimes I get levels when it's potted all the way down 🤔. At times I can just tap on the fader knob and audio jumps on with the fader completely down. It's really wonky and I'm not a super tech like the guy in this video. I was thinking I may need to just clean it out with compressed air or one of those computer air blowers. Any suggestion from anyone would be greatly appreciated.

@martinndaini6610 2 жыл бұрын

I need this machine now

@sergioherrerajaime543 Жыл бұрын

Esto es satisfactorio!

@rodrigoulianadesouza1689 Жыл бұрын

FANTÁSTICO!

@muratdumlutr Жыл бұрын

Great job!

@garagemslzv8465 9 ай бұрын

Tops

@clemenshartung6961 Жыл бұрын

And now for the 32ch 8bus :D

@gazalirahman4651 2 жыл бұрын

Mantap bro

@awishkaakalanka7751 Жыл бұрын

😊👍🏻

@lucianojcampos497 Жыл бұрын

PARABÉNS, FICOU TOP DE +++++

@droses1600 Жыл бұрын

The one thing you didn't do (which is absolutely essential) is to clean out the quarter-inch jack sockets, cos they're gonna be very corroded inside and won't give a good connection. You can get a special tool to do it.

@rimmersbryggeri Жыл бұрын

So you are basically saying th one thing that wasnt done was "restoring" the console then?

@ppdan Жыл бұрын

Seen how "crusty" the faders are I wouldn't worry about the the jack inputs.

@Fl0m963 10 ай бұрын

This issue I have with my desk what would use to clean it ...

@balakumaren8418 Жыл бұрын

👌

@jibiny7421 2 жыл бұрын

I liked this video👌👌👌

@abrahamham3108 2 жыл бұрын

Semoga tambah ilmu

@paolpricci6892 2 жыл бұрын

Very good.

@slcedojosh 2 жыл бұрын

Awesome job

@robertmac71 Жыл бұрын

No idea how you make any money in that with all the time and labor spent, but very cool!

@RathnamMelodies 2 жыл бұрын

Really super

@bowthekidd 2 жыл бұрын

Music artist watching this video : mm, interesting ☺️

@iranoliveira684 2 жыл бұрын

I have 1of these...great sound

@marisbalodis6228 Жыл бұрын

I`ts fare from RESTORATION, i`ts basic fix and cleaning!

@BTHECROWN1 2 жыл бұрын

I have a Mackie 32/8 bus would love for him to fix it

@SKTWoodDesign 2 жыл бұрын

impressive! I

@9962644901 2 жыл бұрын

Bro in my church yamaha mixer is making problem I want technician like you 👍👍

@pinkinthebruh9614 Жыл бұрын

My guy, that thing looks like it controls a nuclear reactor

@sigo2007 Жыл бұрын

It's an analog audio mixer 😂

@aryostosantossantos1215 Жыл бұрын

tem pecas reposicao vender ainda tenho mesa desta esta defeito

@DjAlexanderFrei Жыл бұрын

Есть способ как в разы проще отмыть ручки. Всё кидаешь в банку, хоть в 3х литровую, заливаешь кипятком, сыпешь туда порошка, закрываешь банку и трясёшь. Пена спадёт - повторяешь. потом промываешь. Проверенный способ.