Hello folks! Today I have the restoration of the strangest knife! I see this type of knife for the first time, and I do not know what it is for, at what angle I need to sharpen, etc. please write in the comments if you know. Thanks! Well, let's start the restoration.
First of all, I removed all the plaque and green rust from the brass part of the knife, using a sandblaster. And also removed the remnants of paint from the handle of the knife.
Then I took the knife apart and began the recovery process. I cleaned the old wooden handle and sanded it with sandpaper. Soaked in wax and painted with wood paint.
I have sanded and polished the blade itself. But I did not make new bevels or sharpen them, because I do not know what the parameters of his knife should be. I cleaned the brass part of the knife with sandpaper, I soldered the broken parts with tin-lead solder and applied a blackening agent to hide traces of deep rust and give an older look.
After all the actions, I riveted the knife and did not do the test, I do not know what to do with it. Thank you all for your attention!
Sincerely, Alex. Thanks for attention!
Good luck and health to everyone! With best wishes, Alex!
Please subscribe to my channel: @ScrewsAndTools
🍖 My New Cooking channel! @screwsandtoolscooking
Patreon: / screwsandtools
Paypal: paypal.me/screwsandtools
Facebook: / scresandtools
Instagram: / screwsandtools
#screwsandtools #knife #restoration