Restoration of the Vibrating Water Pump
Рет қаралды 12,525
Жыл бұрынDecided to restore the water pump thrown into the trash. It turned out to be a vibrating water pump. Operates by means of electromagnet vibration.
Water pump for watering the lawn, garden, filling tanks and for all kinds of household chores connected to draw water from wells and other places where there is water. #restoration #pump
Watch other videos and subscribe to our channel so as not to miss the most interesting: https:
// • Rusty Wrench Restorati...
• Hydraulic jack repair....
• Rusty Trap Restoration...
• Restoring rusty jammed...
@constantincanciuc7863 2 ай бұрын
.. te-i cam coit cu șurubele alea.. :) Mulțumesc pentru videoclip!
@ADIJOS 2 ай бұрын
What to do if the power cord on the pump body is damaged?
@AlexsWorkshop10 2 ай бұрын
If the wire near the housing itself is damaged, then in the best case the housing itself needs to be replaced. Since water will get into a very problematic area, and if it is possible to secure the wire to the housing in a new way, you can fill that area with epoxy resin and additionally apply heat shrink.
@DanielRex-lf9xn 10 ай бұрын
what if the bottom corpus is damaged?
@AlexsWorkshop10 10 ай бұрын
Depending on where it is near the bolt holes or the valve itself. And what material is the bottom part made of, plastic or duroaluminium?
@AlexsWorkshop10 10 ай бұрын
Depending on the damage to the housing
@DanielRex-lf9xn 10 ай бұрын
on very bottom ,is aluminium and part is missing and wire cut.@@AlexsWorkshop10
@AlexsWorkshop10 10 ай бұрын
@@DanielRex-lf9xn As I understand it, the valve broke the hole with a pinch bolt. You need to correct the hole and select the bolt and the silicone valve itself under the bolt so that it fits against the body and closes the holes through which water flows.
@AlexsWorkshop10 10 ай бұрын
@@DanielRex-lf9xn There is another option. Repair the hole and make a mushroom valve so that it fits into the middle of the hole and seals that area like a retainer and closes the holes where water gets in. The rubber or silicone valve itself should fit loosely, not too tight and not too loose, in moderation.
Jason Derulo
Рет қаралды 71 МЛН
Workshop Insider
Рет қаралды 117 М.
RP- Garażowo
Рет қаралды 53 М.
AquaKratos
Рет қаралды 3,5 М.
Inventor K
Рет қаралды 44 М.
Здравый Смысл
Рет қаралды 633 М.
Tips Unknown
Рет қаралды 11 М.
Javi’s Family Adventures
Рет қаралды 21 МЛН
Javi’s Family Adventures
Рет қаралды 21 МЛН
ПОТОК AI
Рет қаралды 2,3 МЛН