Restoration Old German Hand Drill - Restore It Project [FULL]

Рет қаралды 70,329

5 жыл бұрын

Restoration of an old German made hand drill. I've bought this old hand held drill at a garage sale for 30 euro and, as usual, i wanted to restore it.
I really enjoy restoring old rusty object, it's something that gives me satisfaction! And as you can see i really enjoy hand held drill as I've made two videos on them, but I promise my upcoming restoration videos will be on different items!
Although i'm not a pro i really enjoy doing restoration stuff, restoring objects brings back to new life something which was, usually, extensively used in the past, which has history with it and that's quite fascinating to me! So i really hope you enjoy this restoration video and like it so i can get some more motivation, so please if you do enjoy it subscribe to the restore it project channel and give me a thumb up!
Any comment welcome and much appreciated!
This restoration video is quite long and i had to shrink every passage to the bones, for this reason I totally skipped the "testing" section at the end.. hope you don't mind and trust me that the drill works perfectly!
I’d like to improve and grow my channel by buying better equipment (camera, lights, pc, editing software, tools) so if you enjoyed the videos and feel like donating here is my paypal link paypal.me/RestoreItProject
Video shortcuts of the restoration
0:04 Old German hand drill overview
0:52 Drill disassembly
5:01 Parts masking before sandblasting
6:35 Sandblasting
7:24 Solvent based primer application
8:19 Parts' sanding after primer
8:41 Waterborne paint application
9:23 Masking removal
9:49 Shafts housing fine sanding
10:03 Bench Brushing
10:28 Deep scratches dressing with files
11:07 Shafts polishing by hands (not very good results...)
11:33 Shafts polishing with the help of my drill press (a lot better now...)
12:20 Plate (gentle) cleaning and reassemble on cover
13:23 Gears cleaning
13:42 Missing handle making
15:13 Handles sanding and polishing (metal parts)
16:11 Boiled linseed oil application
16:28 Let's put everything back all together
19:16 Restoration complete - Final overview
Thanks! Restore it project
P.S:: my first three restoration videos linked here below
Restoration of an antique hair clipper • Restoration antique ha...
Restoration of an old scale • Restoration of an old ...
Restoration of an old hand held drill • Restoration of an old ...
For shooting this video i've used my new camera, if you like the video quality and are interested in buying it i'm leaving the amazon link here below. It's an affiliate link so if you decide to buy it i'll get a small commission on that purchase.
Links listed point to different country market place, choose the right one depending where you come from! Thanks!!
USA --- amzn.to/2BlQCAB
United Kingdom --- amzn.to/2TqxJ6G
Canada --- amzn.to/2DQ4wNM
Deutsch --- amzn.to/2OTG7bp
Français --- amzn.to/2OVvVzd
Español--- amzn.to/2OTWeWz
Italia --- amzn.to/2zjrf0Q

Пікірлер: 113

@tribestribes2555 Жыл бұрын

To all them people who restore old things, my greatest admires.👍

@channelsixtysix066 Жыл бұрын

Yeah, you're right, it's the higher gear ratio making it harder to turn. 00:43 Should all come good after the restoration. Very good. Put a nut on the crank shaft, a knurled thumb nut would be a nice touch. 👍

@LFKGooner Жыл бұрын

I enjoyed all your videos and this looks like your last one.

@restoreitproject5514 5 жыл бұрын

Hello! I'd like to thank you all for the unexpected views I got in my last videos, many positive comments and also some negative which is anyway a good thing as long as they are constructive and help me grow. If you enjoyed the video please leave a like, comment and subscribe to the channel! I'd be particularly interested in what you think about old tool like this one, are they worthless in your opinion? Or do you think it's worthwhile to restore them and keep them around? Let me know!! So thank you again and happy Holydays! Restore it Project👍

@kfl611 3 жыл бұрын

The only thing I noticed that other people did on restorations, that I did not see you do here and I don't know if they are necessary was, some people had wood on the sides of their vice, I would think so when the drill is clamped in the vice, the metal in the vice does not put additional mars on the drill, and most people wore eye protection, goggles. This was a very informative and educational video, thank you for making it. I hope you get many years use out of your restored drill. Oh and you should have cranked it when you were done to show how smoothly and easily it now worked after the restoration.

@MusicFurler 4 жыл бұрын

I have one of these breast drills, mighty fine drill very robust too. I use most of my old hand tools everyday as I work at my home so my tools are just cleaned and maintained to me it doesn't matter if the paint is chipped or how shiny they are but, I love watching these restoration videos to see how other people tackle there own views on restoration.

@briansworkshop01 5 жыл бұрын

Fantastic job looks great thanks for sharing 🍺👍👍👍👍

@shedmanx3640 5 жыл бұрын

Greetings from Australia mate. Great work. Loved watching you work. You have a talent for this. A word of advice is get yourself a Dremel or rotary tool. Less aggressive on wood than a pneumatic die cutter and the range of wire brushes you can pick up from EBay is amazing. I use mine a lot for this work. I use my die cutter for metal polishing. Works a treat.

@johnfix1 3 жыл бұрын

Great job restoring the drill. I restored 2 of those Ixion drills and really enjoyed the process.

@MASI_forging 11 ай бұрын

This video was amazing to watch. Great work dude 😮😮

@barbarahessey2965 5 жыл бұрын

Enjoy your videos. Your choice of music is spot on, love the fast action and stopping points. Hope to see more

@restoreitproject5514 5 жыл бұрын

Thank you Barbara! Much appreciated!

@christinah3122 5 жыл бұрын

I love watching these videos. You are extremely talented. I would prefer no music, or quieter music. Hearing you take it apart and put it back together is part of the fun in watching the video.

@restoreitproject5514 5 жыл бұрын

Thanks!! some prefer with music and others don't but i think no music is the way to go... let's see how this evolve....

@pemtax557 5 жыл бұрын

All in all a nice restoral of the brace. You were fortunate to pick it up at a garage sale, it's a nice specimen. Congrats

@restoreitproject5514 5 жыл бұрын

Thanks! I'm visiting some used stuff markets these days and it's not easy to find something appealing....

@edka1031 4 жыл бұрын

Magnifique!

@2003garyb 5 жыл бұрын

Beautiful work! I'm glad I found your channel. Don't listen to the negativity. You're doing a great job! Thanks for sharing. I look forward to seeing more of your projects. Take care and Happy New Year! I hope 2019 is filled with success and prosperity for you.

@restoreitproject5514 5 жыл бұрын

Hi Gary! Thanks for the compliments and whishes! May 2019 fulfil what you desire the most! Happy holydays!

@Cradley684 5 жыл бұрын

Really excellent restoration !!!

@restoreitproject5514 5 жыл бұрын

Thank you Brian!!

@jamescox8222 5 жыл бұрын

This was awsome to watch, you have done an excellent job! The only thing I would like to see is a still shot of the before and after side by side at the end of your video.

@restoreitproject5514 5 жыл бұрын

Really happy you enjoyed it! Yes i could have done that but i didn't as the video was way too long already... anyway i've come to think it's good to have it in order to have an immediate visual comparison, next one ...Thanks!!

@scrapperdscrapperj3948 5 жыл бұрын

I thoroughly enjoyed your video 👍👍 keep them coming. Love the quiet relaxing music too.

@restoreitproject5514 5 жыл бұрын

I'm happy to hear that! Music is a personal preference, many like it and many don't. I personally like it if it's not loud and a bit relaxing as well! Thanks!

@MorinaShkumbin 5 жыл бұрын

Restore It Projec

@jonanderson5137 5 жыл бұрын

Good job.

@alejandrorz6577 5 жыл бұрын

Great job! Keep on it.

@restoreitproject5514 5 жыл бұрын

Thanks a lot!!!

@Dark..498 5 жыл бұрын

Looks nice, but would have liked to see it drill something. Greetings from Argentina!

@sewren 3 жыл бұрын

Nice job. Thanks for sharing.

@westonbridges4818 5 жыл бұрын

I love the work!! 100%

@restoreitproject5514 5 жыл бұрын

Thanks!!!!!!

@cristianarabel648 5 жыл бұрын

genio me empezo a gustar esto de la restauracion espero encontrar algo para poder empezar

@Bill_Hartnett 5 жыл бұрын

You did great! I can only think of 2 things you could add.. Maybe add a washer & a wing nut to the cranking handle to keep it in place? (I mean those threads are there for a reason right?) And like Diogo said, open up the chuck and clean it out too. Well done!

@restoreitproject5514 5 жыл бұрын

Yes, washer & wing nut are definitely missing and are necessary to use the brace. Chuck was actually in very good shape, also the internal parts are moving freely so i just sprayed some lubricant and kept it as it was... thanks for commenting!

@giuseppecolombo4701 5 жыл бұрын

Super restauro complimenti

@restoreitproject5514 5 жыл бұрын

Ti ringrazio Giuseppe! Buon anno!

@JMMM7 5 жыл бұрын

Muy buen trabajo, saludos!!

@restoreitproject5514 5 жыл бұрын

Muchas gracias!

@markharris5771 5 жыл бұрын

An excellent job. You'll find people like to try and pick faults with the most minuscule things for the sake of it. I like the fact you just tidied up the badge, it’s original and it carries the drill's history. It would have been nice if you’d taken the chuck to pieces, it only takes a minute and you’d have known the entire machine was as new. However, I don’t think that made it a bad restoration or the job was done wrong in any way, it was just a small extra step you didn’t take. I don’t think any rust will 'spread' to any significant amount if the drill is used regularly, and it’s wiped over from time to time with Paul Sellars's 'rag-in-a-can'. There are some quite big differences between the names Americans use for tools and the names we use in the U.K. Here in the U.K. it’s called a breast drill, a brace is a totally different tool that you use with augers.

@Vildur01 5 жыл бұрын

gute Arbeit

@neraklrllessur8844 Жыл бұрын

Turned out really nice. Next time, go over the housing for casting flaws.

@marciowashingtonmartins3954 5 жыл бұрын

Very good.

@SteveC38 4 жыл бұрын

Well Done👍

@garymucher9590 5 жыл бұрын

Except for the badge, great refurbishing job. You could have made a stencil and polished the old badge and used the stencil to re-badge it again. And they make push-screws to install those plates and badges. Check them out. Easy to use. Thumbs Up!

@restoreitproject5514 5 жыл бұрын

Hi Gary! Thanks for these info! I actually didn't know i could have made a stencil and transfer it on metal... this is very interesting stuff and i might try it out for some next projects!

@user-dx6pt9oo6h 5 жыл бұрын

Cool🔥🔥👍👍

@briantraxler2780 5 жыл бұрын

Great work! Don't take the criticisms too seriously.

@diogobento6053 5 жыл бұрын

I really like your work I think the only thing that you miss was that you don't open the chuck. Keep up the good work and bring us more restorations😉

@restoreitproject5514 5 жыл бұрын

I've been thinking about opening the chuck but it was in very good shape and moving freely so i didn't...Thanks for watching!

@pilooha8777 4 жыл бұрын

Very nice!

@plasmaoc 4 жыл бұрын

Have the same one. Ixion brand. Also restoring it. Disassembled everything. Going to degrease it then soak in Molasis followed by diesel.

@Deadfeat 5 жыл бұрын

I think there should be a large burled wheel nut holding the crank handle in place. So the handle can be resecured in either position.

@restoreitproject5514 5 жыл бұрын

Yes, there must have been a nut to hold the crank handle but unfortunately wasn't there when i bought it. Thanks for watching!

@LegoMan-cz4mn 5 жыл бұрын

Oh what a coincidence, I am currently restoring the excact same thing! Although mine is looking a little rougher

@LegoMan-cz4mn 5 жыл бұрын

but I can tell that your missing one part, it needs a bolt to lock the crank handle in place

@randomstuff8286 5 жыл бұрын

Pretty music

@plasmaoc 4 жыл бұрын

You are missing one piece though, the knurled finger nut that goes onto the thread before the sqaure drive.

@profeordonez 3 жыл бұрын

Muy buen trabajo. Pero los remaches dorados contrastan con la placa gris :/ y Si le retocas las letras a la plaquita. Te queda de 10. Gracias por el video, me ayuda mucho para una restauracion que voy a hacer

@zilla3066 5 жыл бұрын

Хороша машинка , и колер подобран удачно

@marB84 3 жыл бұрын

Great looking resto! 1 complaint though... you warn for dangerous tasks while you are wearing gloves doing it.

@ka-powUSA 4 жыл бұрын

First time I saw a clay-like material used for masking. Great idea. Only thing I would have done differently would have been to make the covers Poppy Red. Too many black tools.

@jhmsmarttv795 5 жыл бұрын

You forgot the wing nut securing the crank. Otherwise a very nice restoration.

@PAPIOPA1 3 жыл бұрын

Hi, I have similar drill that belongued to my grandpa. I was hoping you'd open the chuck too. I think mine must be missing a spring or something, because the jaws tend to fall lose inside the hood. Is there a spring there?

@LarsKiel 5 жыл бұрын

👍

@simplemanduke7128 5 жыл бұрын

Dear Sir what kind of grease did you use on the inner gears?

@georgeallen556 5 жыл бұрын

if I wanted to write anything bad about this video, then its not about the video realy its about me and my state of mind , usualy that means im not right in the head, so I say let the haters hate , poor things, they cant help it , anyway this like all of your videos brilliant and a pleasure to watch , thank you for your hard work and the time you take to make a perfect finished product , Merry Christmas and a very Happy New Year

@restoreitproject5514 5 жыл бұрын

Thank you so much for your very kind words! I wish you all the best as well for this coming 2019!

@dimitrioslykissas7981 5 жыл бұрын

I'm interested in the make and model of the air grinder you're using to sand the handle.

@restoreitproject5514 5 жыл бұрын

It's a quite old air angular grinder... i have to look it up for make and model... i'll be back!

@stefflus08 5 жыл бұрын

Ok, great renovation. It could also have been a good restoration with merely some car rubbing compound as much of the original laquer was there.

@restoreitproject5514 5 жыл бұрын

The original laquer was missing on many spots, there were some rust as well... perhaps for a vintage look i could have done as you said. Thanks for watching!

@Creat1vPL 3 жыл бұрын

That handle looks like taken from MP 42 :D

@AbChabni 4 жыл бұрын

Back in days where things used to be simple

@cpeterson877 5 жыл бұрын

You went to all that trouble and didn't take the chuck apart??

@restoreitproject5514 5 жыл бұрын

Gosh... i must admit i didn't! But it looked good :-)

@BrunoWiebelt 5 жыл бұрын

why removing the nice patina on the handel?

@edgardomohallaaparicio8867 5 жыл бұрын

Tengo una igual a este máquina le está faltando la tuerca que sujeta la manija que cambiar la velocidad de giro de máquina.

@restoreitproject5514 5 жыл бұрын

Sí, tienes razón, pero ya lo compré así. Gracias por el comentario y feliz año nuevo.

@edgardomohallaaparicio8867 5 жыл бұрын

@@restoreitproject5514 gracias a vos por responder y feliz año. Vos querés te envío por algún medio la foto de la tuerca ...

@Version00 5 жыл бұрын

Discúlpame y perdóname, pero me has jodido uno de mis vídeos estrella. Tal vez no llegase a ser tan bueno como el tuyo, pero estaba en ello. Mi taladro estaba totalmente agarrotado y oxidado y poco a poco lo he ido restaurando. Espero llegar a tu nivel. Cuando tenga el video, te lo mando. Gracias y Feliz Año Nuevo. LIKE

@restoreitproject5514 5 жыл бұрын

Gracias y cuando hayas terminado el video envíamelo! Feliz Año Nuevo

@johnlawton5534 5 жыл бұрын

What, no wing nut to hold the crank handle in place????????

@Ellenslife851 5 жыл бұрын

I recognize the bluegrass tune first song but was wondering artist I forgot there name

@ugolblab6940 4 жыл бұрын

Подскажите пожалуйста, а какой лучший способ снять многолетнюю ржавчину?

@johnnybladeackermann9968 5 жыл бұрын

Beautiful restorstion, but please don't wear gloves when using the drill press or the wire wheel, it's dangerous!

@MusicFurler 4 жыл бұрын

I agree, wear gloves only for manual jobs and when dealing with chemicals but not for rotating or revolving tools.

@ASTER-ik4hh 4 жыл бұрын

У меня такая Советская- один в один- буду восстанавливать.

@MohamedAli-uk9ty 5 жыл бұрын

Say something like who was discovered when it discovered

@briantraxler2780 5 жыл бұрын

Mohamed Ali ( Noah, on the Ark?)

@jamesgyorko3850 5 жыл бұрын

That is not a hand drill! What you have is a fine example of a breast brace.

@restoreitproject5514 5 жыл бұрын

Thanks for the info! So this type of drill is called "brace"... well good to know it.

@jhmsmarttv795 5 жыл бұрын

Breast drill or breast brace drill is even more adequate. :-)

@valentinkovshik 4 жыл бұрын

@@jhmsmarttv795 Terminology is very interesting here. It is a breast drill and it can be considered as a type of a hand drill. The brace drill is usually the U-shaped one without gears. I see sometimes that the name 'brace' is used by older craftsmen for any kind of hand crank drill. I heard that some people use "wheel brace" for the geared hand drill with a large wheel (a.k.a. eggbeater drill).

@jhmsmarttv795 4 жыл бұрын

@@valentinkovshik I have both models in my possession actually. The one used in the video, was the one I had to use until I got an electrical drill in my late teens. The manual model was indeed a real challenge.

@valentinkovshik 4 жыл бұрын

@@jhmsmarttv795 I have a Soviet clone of the drill in the video. Yes, it can be hard to operate in high-speed mode. In slow mode, it is OK if a bit is sharp. It is not suitable for spade bits though. The other manual drill I have (a clone of Stanley №803) is my favorite for drilling small holes. That open-gear design is much better than this. Very fast and reliable for many applications.

@michaelpugh4894 5 жыл бұрын

Cool looking breast drill. Nice tear down and restoration.

@dr__mortal4666 3 жыл бұрын

what if gears are damage ??? ANY alternative DIY ? except buy new !!!

@nalinux 5 жыл бұрын

It looks quite the same as the "Peugeot". Yes, they did tools, not only cars :)

@raoulvolfoni1800 5 жыл бұрын

They did bicycles , kitchen material as pepper mills , tools . . . Great quality stuff .

@mehertatheer 2 жыл бұрын

Donkey display it's working

@nikhilbhale79 5 жыл бұрын

Good job. Only thing I may suggest is don't wear gloves when working with wire brush. Can tell this after working for 15 years on oil rigs. Ohh am I turning into a safety nazi?

@gayle525 5 жыл бұрын

I think a paint stripper would have worked as well or better than sand blasting.

@restoreitproject5514 5 жыл бұрын

In my experience there's nothing as good as a blasted/sanded bare metal surface when you want to make a sound paint job. Thanks for watching and commenting!