Restoration The TANK of Watches - Polishing - Vintage Certina DS-2 - ASMR - Cal 25-661

  Рет қаралды 4,892,103

Watcheyes

Watcheyes

Жыл бұрын

In this video I make a restoration of a watch that is The TANK of watches. This vintage watch was produced in ~1970 by Certina and its model name is DS2 (Double Security), the meaning of this is that the watch can be dropped, it can take hits etc, like a true TANK!
It's a manual watch (you wind it via the crown). The movement is called cal 25-661. This video is only ASMR.
This watch seems to be the most robust watch that has ever been built. It has a big rubber shock absorber inside of it that separates the movement from the casing so no shocks will travel through the casing to the movement.
After the restoration the Certina watch works well. It runs around a couple of seconds per day +/- which is stated by the timegrapher and the amplitude is around 290+ degrees.
My gear and other products, affiliate links*:
Certina watches*: amzn.to/3UANlDb
Tamron 28-75 f2.8 sony e (Not G2)*: amzn.to/3xEVvRj
Sigma 70mm f/2.8 dg macro sony e*: amzn.to/3O5xgCM
Timegrapher*: amzn.to/3xE2oT4
Work:
*Disassembly of the watch and check for problems along the way
*Inspection of all parts if they are worn or broken via the microscope
*Manual cleaning, pre-cleaning, I do this with Rodico (Bergeon), some toothpicks, pegwood and with IPA (isopropyl alcohol). Then after pre-cleaning I let all parts be in benzine and later a double bath of IPA (Isopropyl alcohol). The pallet fork gets a bensin bath and a Epilame treatment, balance wheel will only be cleaned with benzine.
*Cleaning the hour/minute/second hands and the dial, nothing more to do here but still it looks a bit better.Cleaning the casing etc with an ultrasonic machine.
*Lapping/polishing of casing was done with 3M lapping film from 320 grit to 8000 grit.After manual lapping I did a final polish with a Dremel tool in a couple of steps with cerium oxide with a couple of felt wheels (hard felt). A couple of passes with a very “watery” blend with cerium oxide made a fine mirror polish.
*Assembly and oiling all relevant parts
*Checking if the movement works fine and then checking it with the timegrapher
If you like this video, I’m very happy if you push the Like button (maybe put a comment?) to my channel, more videos will come! Take care and thank you for your time!
This is not a tutorial video, I’m just a hobbyist and might do things incorrectly.
-----------
My channel :
/ watcheyes
-----------
Instagram:
/ watcheyesone
*LINKS USED IN THE DESCRIPTION MAY OR MAY NOT BE AFFILIATE LINKS
By using the affiliate links I earn a small fee of your purchase with no extra cost. This will support my channel so I can increase the quailty of my videos. Thank you for the support!

Пікірлер: 2 300
@Watcheyes
@Watcheyes Жыл бұрын
I've been a long fan of this modell, Certina DS-2. So I tried my luck and bought one in an auction. The watch was heavily worn but I saw that it had a beautiful dial under the cracked glass. The watch was a joy to work on, Certinas from 1970 is built like a tank, solid thick metall and robust parts. In the end after all work I think this watch turned out very good, movement is in a good condition also. Ready for new action :D
@chrvgts528
@chrvgts528 Жыл бұрын
Good job overall, but why did you take the new mainspring out of the holder ring just to wind it up again? You know you can just push them directly into the Barrel from that ring?
@drmrh
@drmrh Жыл бұрын
@@chrvgts528 we liked to watch winding it
@maisonMaple
@maisonMaple Жыл бұрын
Amazing - but can’t believe you didn’t exert a little more to get the greasy marks off the dial…
@Andreas0705
@Andreas0705 Жыл бұрын
@@chrvgts528 yeah I noticed that as well, usually you can just pop it in from the ring. If it was an older type of spring, I'd add some hp-1300 preferably dragged out on the whole spring but here I'd just put 4 spots evenly and let it soak down in the spaces.. But a new spring has a coating, don't need lube.
@user-xj7qc8in7i
@user-xj7qc8in7i Жыл бұрын
Very good job!!! How I can send my watch to restoration ?
@floydthompson8668
@floydthompson8668 Жыл бұрын
I've been a watch collector since I was 15. Without words or music, this video tells why. I was a "how does it work" curious boy growing up, taking apart trashed small appliances to understand the mechanics. At about 8 or 9, I could completely disassemble and reassemble my bike, then a lawnmower. Before I could drive, I made money in the summer repairing lawnmowers. In the 7th grade, I had wood & metal shop. Starting with my first, I worked on my own cars. Years later, this is why I love and collect watches. These tiny brilliant machines are like trophies to men who laid under a car and got dirty, oily, and knuckle busted. And when we dress, our fine watch tells the story. Thank you for this video.
@user-uj8fo2lh4d
@user-uj8fo2lh4d Жыл бұрын
Love to hear your story, nice work!
@ismaelcastillo43
@ismaelcastillo43 Жыл бұрын
Very well said !
@anirbanbhattacharjee3474
@anirbanbhattacharjee3474 Жыл бұрын
Lovely comment. Thanks for sharing 🙏🏼
@joaoalbertodosanjosgomes1536
@joaoalbertodosanjosgomes1536 Жыл бұрын
Amen.
@hamzaahmed1403
@hamzaahmed1403 Жыл бұрын
@@Shillybaisuh And who asked you to reply?
@deathstarresident
@deathstarresident Жыл бұрын
Growing up in the 80s, I take pride in the fact that when something breaks our generation believes in fixing it rather than buying a new one. You can imagine how satisfying it was for me to watch you work your magic on this timeless timepiece
@makenomistake_mynameisjeff8731
@makenomistake_mynameisjeff8731 Жыл бұрын
Unfortunately most things these days aren't worth fixing when they break.
@deathstarresident
@deathstarresident Жыл бұрын
@@makenomistake_mynameisjeff8731 Don’t get me started on cars they make now. Half the stuff in there is plastic
@makenomistake_mynameisjeff8731
@makenomistake_mynameisjeff8731 Жыл бұрын
@@deathstarresident I think one of the worst is appliances these days. They look pretty but they're not built to last and that is intentional. Meanwhile, 90-something year old grandma is still using her washer and dryer from the 70's.
@mvubu6823
@mvubu6823 Жыл бұрын
Stuff is designed to break or be redundant after a few years.
@roman9509
@roman9509 Жыл бұрын
Planned obsolescence
@svZia-Switch51
@svZia-Switch51 Жыл бұрын
Beautiful work. It’s nice that there are people like you out there to help keep these things alive.
@ikon8275
@ikon8275 Жыл бұрын
I'm not even to watch person and I just spent a half hour of my life watching this video. And I have absolutely no regrets it was extremely fascinating, great restoration.
@AY-cj9kp
@AY-cj9kp Жыл бұрын
How can someone remember how to put it back together? This is insane, and very meticulous. Give a definite like for that effort
@matthewjohnston3195
@matthewjohnston3195 Жыл бұрын
Making a video helps !
@_f355
@_f355 Жыл бұрын
these plain watches without complications are all built on the same principle, after having worked on a couple of them you just know what every part does. the real fun starts when you take your first chronograph movement apart - it's like three times as many parts, and every movement does it differently :)
@rinaldy0812
@rinaldy0812 Жыл бұрын
Insane skill good talent
@treewisps4085
@treewisps4085 Жыл бұрын
more impressive is the guy who engineered / built the watch
@nordicvision1893
@nordicvision1893 Жыл бұрын
He did record everythimg...
@robertdragoff6909
@robertdragoff6909 Жыл бұрын
I am in awe of someone who takes a piece of junk and makes it like new. I’m also in awe of someone who can take apart the tiniest machine on the planet, repair it, then put it back together. You did a great job in getting the dents and dings out of the case. Great video!
@Watcheyes
@Watcheyes Жыл бұрын
Hello Robert, very kind words and a very nice comment from you, appreciate it alot, many thanks! Have a great day to you! :)
@garymorland1246
@garymorland1246 Жыл бұрын
Fantastic. I really enjoyed this...envious. I'd love to learn horology.
@Watcheyes
@Watcheyes Жыл бұрын
@@garymorland1246 thank you Gary, you can do it, just start :)
@KB-ke3fi
@KB-ke3fi Жыл бұрын
Maybe we can elect officials that can put our country back together again.
@doesntreallymatter9368
@doesntreallymatter9368 Жыл бұрын
@@Watcheyes wow just wow! Amazing literally genius at work well done sir! Can you help me with a watch my dad left me.. very similar to what you have done in this video, yet mo one at all can fix it.. im in england and would love your help to restore it.. my dad died 31.12.1996 and so to have it working and to wear it would be a dream for me.. please please can you help me with it????
@xBiOvOrEx
@xBiOvOrEx Жыл бұрын
So today I discovered that watching old watches being restored is one of the most interesting yet relaxing things ever. Liked and subscribed. Please continue.
@asetdedieva4642
@asetdedieva4642 11 ай бұрын
Right?!😁
@Kevins-Philippine-Retirement
@Kevins-Philippine-Retirement Жыл бұрын
I really liked this restoration. A fine balance with not removing a lot of case material during brushing and polishing, yet enough to allow for an impressive final finish.
@WD1271
@WD1271 Жыл бұрын
This is pretty next level restoration. I'm equally as fascinated by the products used to help fix the watch as I am the watch itself.
@aaaazaxac
@aaaazaxac Жыл бұрын
Ditto. The equipment used and the sandpaper grit, polishes used in each stage. Thanks for your kind willingness to share. Robert
@camarocarl7130
@camarocarl7130 Жыл бұрын
It was a pleasure watching a craftsman bring this fantastic watch back to life. Cheers.
@Watcheyes
@Watcheyes Жыл бұрын
Many thanks Carl 😊 🙏
@apoymc
@apoymc Жыл бұрын
absolutely ! it was a pleasure to watch !
@erwinwaldherr2126
@erwinwaldherr2126 Жыл бұрын
No words, no music! Just the noise of assambling. I like it the most.
@KingLion-jy2yl
@KingLion-jy2yl Жыл бұрын
I grew up behind the Certina factory and played with watch parts as a child. Certin is one of the best watches you can buy.
@peterbartlett5774
@peterbartlett5774 Жыл бұрын
As a Certina DS-2 owner for over 53 years I can attest to their robustness. Great video!
@gordonlee7176
@gordonlee7176 Жыл бұрын
Been collecting Certina since I was 20. Now 13 years later I have 9 of them. Best decisions I ever made 🐢
@alierem4266
@alierem4266 9 ай бұрын
I own a 'Blueribbon' auto, rectangular face. Body built like a Russian tank. Super strong, super attractive watch. Small knocks did not hurt it.
@deneofarrell496
@deneofarrell496 Жыл бұрын
The patience and precision of your disassembly of the watch is amazing, then you see those tiny components, the skill in machining and making of those components to what must be very, fine tolerance levels is a engineering skill that only a select few could ever achieve......
@constantinosschinas4503
@constantinosschinas4503 Жыл бұрын
Really wondeful restoration. The balance of Vintage/Restored is astounding.
@RichardJWAllen
@RichardJWAllen Жыл бұрын
I have two DS-2’s in my small Certina collection so was especially delighted to stumble across this beautiful video of such meticulous work. You have a talent for seeing ‘a diamond in the rough’; sparkling outcome from a depressing beginning
@Nathan-wn5mc
@Nathan-wn5mc Жыл бұрын
Not sure why I just watched this but it was incredible to see. The engineering that went into this watch 50 years ago was incredible. Awesome you knew how to work on it so well.
@markdavis4318
@markdavis4318 Жыл бұрын
I’m always amazed at the precision involved in watch repair and restoration. This is my first time watching one of your videos. I appreciate your humor, and also enjoy simply watching you work with no added talking or music. Will definitely come back for more!
@noobinzone
@noobinzone Жыл бұрын
What an incredible result! A highly skilled, clever restoration - truly outstanding work!
@Ethan_Philip19
@Ethan_Philip19 Жыл бұрын
When I first saw this video, I took a look at how long the video was, and I was like "pfft, I'm probably just going to skim through it real quick" But the more I watched, the harder it became for me to move. I don't think anybody can see something like this and not have a huge amount of respect for watchmakers that do everything by hand. Not many people understand and appreciate the work that goes into making watches. You can't help but be in awe. Beautiful work.
@ginasticacapri8685
@ginasticacapri8685 Жыл бұрын
I was fascinated by your expertise and mancraft. Never realized the amount of work evolved. I am a vintage watch collector and now I understand prices for good conditioned time pieces
@j.p.7990
@j.p.7990 Жыл бұрын
It is unbelievable that inside the watch there is a whole system from many smaller or bigger parts that work armonically together....but the most fascinating thing is the beating 💓 you see in the mechanism which reminds me the human heart... giving life to this mechanism..... simply beautiful!!!!
@Watcheyes
@Watcheyes Жыл бұрын
Very well written words J P, thank you for this! Have a great evening! 😀
@GlazzedDonut
@GlazzedDonut Жыл бұрын
i love the contrast of how gentle you are versus clearly the life this has been through. excellent video.
@armandotocci2453
@armandotocci2453 Жыл бұрын
You have truly delivered outstanding work. Rarely I have seen such precision in restoring watches like you do. Well done!
@xmetguy1
@xmetguy1 Жыл бұрын
This shows that one does not need every expensive tool of the watch service industry to do professional work. Great result! I was in awe as to how beautiful this watch turned out!
@matthewjohnston3195
@matthewjohnston3195 Жыл бұрын
I think all of the tools used in this restoration would cost quite a lot. Some looked very specialised
@markuschampos5750
@markuschampos5750 Жыл бұрын
He used a lot of very expensive tools so I don't understand your comment.
@alierem4266
@alierem4266 9 ай бұрын
'Tools maketh the man'. How do you know that he did not use top line tools. This is a top line watch from '70. I own one from that era and know watch makers also who own the best available sets of tools. Watchmakers do rely on these. Oils aint oils (and) not all tools are same quality.
@losingmyfavoritegame8752
@losingmyfavoritegame8752 Жыл бұрын
I started holding my breath as you put the cleaned components back together! This is so cool!
@LOOMIS1638
@LOOMIS1638 Жыл бұрын
Amazing! That mainspring winding and install tool is a thing of beauty.
@44musher
@44musher Жыл бұрын
nicely done, it is always a pleasure to see a craftsman at work achieving an intended goal.
@jumperpence
@jumperpence Жыл бұрын
Outstanding photography, the best that I have seen. Beautiful restoration. Thank you!
@Watcheyes
@Watcheyes Жыл бұрын
Wow, very glad to hear that Christopher, many thanks, have a great day!
@markkempton4579
@markkempton4579 Жыл бұрын
@@Watcheyes This is what I came here to post. I was very into watches before getting into photography, but have never consumed any watch-related content on KZfaq. I'm not sure why the algorithm showed this to me, but I'm glad I did. Now I will need to watch your backlog! Gorgeous imagery and the DS-2 has been underrated IMO.
@buddhismful
@buddhismful Жыл бұрын
Yeah , what a photographical work !
@Watcheyes
@Watcheyes Жыл бұрын
@@buddhismful many thanks :)
@Watcheyes
@Watcheyes Жыл бұрын
@@markkempton4579 wow many thanks Mark, very glad that you liked my video 😀
@lefroy1
@lefroy1 8 ай бұрын
Stunning restoration of genuine retro beauty!
@johnfuller6338
@johnfuller6338 Жыл бұрын
Watching you work is utterly fascinating, the care and skill involved is beyond comprehension, masterfully done.
@wilhelmrogue1
@wilhelmrogue1 Жыл бұрын
Very cool, love all the skill and specialty tools that go into this …. Very relaxing to watch you work!
@pipodorologio1648
@pipodorologio1648 Жыл бұрын
proud owner of 2 Certina's...love this vintage model. It's pretty beat up, great work on the case polishing.... Thanks for sharing.
@gus196666
@gus196666 Жыл бұрын
i have 3
@Watcheyes
@Watcheyes Жыл бұрын
Many thanks Pipo and thanks for commenting. That's nice, keep em :)
@TheElrondo
@TheElrondo Жыл бұрын
I also own 2 🤓 mine are ~30 years and still funktional.
@modofatak
@modofatak Жыл бұрын
4 certin, uhh… 🧐
@pathikdesai5853
@pathikdesai5853 4 күн бұрын
This was one of the most elaborate watch restoration of all time. Crazy man!! 🔥🔥
@VictorIsac-zo5cx
@VictorIsac-zo5cx Жыл бұрын
The dedication made me cry a little bit. Fantastic! Wow . Each detail of each move has been thought long before. The tools are outstanding.
@8tyfour
@8tyfour Жыл бұрын
What a restoration and the result was beautiful. On the other hand the description written everything was so professional. Keep up the good work Buddy.
@waynehilton5443
@waynehilton5443 Жыл бұрын
Your video was a pleasure to watch. Your attention to detail, especially hand washing all of the movement parts is admirable. Thank you very much for sharing . You brought back to life a beautiful 70’s vintage watch 👏.
@Watcheyes
@Watcheyes Жыл бұрын
What a great comment Wayne, many thanks for these kind words! Have a great evening!
@ciupenhauer
@ciupenhauer Жыл бұрын
@@Watcheyes hey Watcheyes, what piece were you wearing while filming this? ^_^
@Watcheyes
@Watcheyes Жыл бұрын
@@ciupenhauer ohh, good question, I don't really remember but maybe a Seiko samurai and my other project, the Citizen which can be seen on my channel :)
@PaulMyers-nz4jp
@PaulMyers-nz4jp Жыл бұрын
Certina is a make I've always wanted to own but never have despite collecting watches over many years. It's a beautiful restoration - talk about making a silk purse out of a sows ear!! I loved the main spring winding tool in the little wooden box, I always wondered how they were rewound & now I know. Fantastic video 😀
@gab3617
@gab3617 Жыл бұрын
This watch is out of this world! Imagine how they do it in 1970, so much precision, unbelievable
@sigung01
@sigung01 Жыл бұрын
Perfectly produced video, no boring “manspeaking”, minimal musical intrusion, just great, gripping close up video. Fine work!
@romualdgardes1461
@romualdgardes1461 Жыл бұрын
Thank you for another instructing and interesting restoring video. The before and after shows the effort and dedication you put in into it! Very nice indeed.
@Watcheyes
@Watcheyes Жыл бұрын
Hi Romuald, thank you for your kind comment, have a great day!
@mumubuntu
@mumubuntu Жыл бұрын
That, Sir, was a very satisfying video. Thank you very much for keeping these vintage timekeepers alive!
@captainstablemdr113
@captainstablemdr113 Жыл бұрын
Wow! This is just therapeutic watching all your tools of the trade work in symphony to bring this watch back to life. Well Done!
@ashkanr4796
@ashkanr4796 Жыл бұрын
the technical aspect aside. watching it is like ZEN for me. its not less than a Poem to see it gets a new soul. its literally poetic to see the result and inevitably dive into the concept of time, life and death. watch is one of the greatest symbols of our lives. after that it use as a tool to measure change in life TOO. thank you for these beautiful videos. love and much respect to you man. 🙂❤🙏🍻
@Watcheyes
@Watcheyes Жыл бұрын
Wow, well written comment there 👏 Ashkan, many thanks for these beautiful words! Indeed it is.
@elephantman2415
@elephantman2415 Жыл бұрын
My father was a watchmaker and had a shop in which he sold these watches. He reckoned Certina were by far the best watch make and I used to regularly hear his sales pitch of 'the Certina DS, the toughest watch in the world'. I have a 1980s model.
@Watcheyes
@Watcheyes Жыл бұрын
Wow, what a fantastic story, Indeed Certinas during this era built there own movements and they were of pure quality. Many thanks for commenting!
@red-can-help
@red-can-help Жыл бұрын
Sir, you are an artist. I have been delighted by your professionalism and your precision. The time past watching this video was pure enchantment. Bravo and thank you.
@Senna-xi1gr
@Senna-xi1gr Жыл бұрын
I love watches but I’ve never seen a detailed video as good as this. Well done & great work to bring this old watch back to life. 👍🏆
@porsupuesto6651
@porsupuesto6651 Жыл бұрын
Me has transportado a mis tiempos de relojero. He recordado cada detalle como si fuera ayer, y eso que ya hace 25 años que dejé el oficio. Lindo y emotivo vídeo. Enhorabuena.
@daviherculano4486
@daviherculano4486 Жыл бұрын
Interessante demais. Meu pai é relojoeiro. Sou do Brasil 🇧🇷
@klonman235
@klonman235 Жыл бұрын
Сдавал часы на ремонт и только. Потрясен работой этой профессии
@joaoalbertodosanjosgomes1536
@joaoalbertodosanjosgomes1536 Жыл бұрын
@@daviherculano4486 Meus pêsames.
@joaoalbertodosanjosgomes1536
@joaoalbertodosanjosgomes1536 Жыл бұрын
👍
@daviherculano4486
@daviherculano4486 Жыл бұрын
@@joaoalbertodosanjosgomes1536 Meu pai é vivo mano(graças a Deus).
@davidl2438
@davidl2438 Жыл бұрын
A very nice job. I am amazed with your skill to transform a watch which has lived a hard life back to being a respectable time piece. As you were disassembling the watch I was surprised at how nice the inner workings of the watch looked. The case and crystal took most of the punishment. Great Job!
@irvin4654
@irvin4654 Жыл бұрын
Utterly mesmerising work carried out with surgical precision. The finale reveals a watch which is akin to a new heart pulsating perfectly in the hands of its master craftsman.
@learnarabicwithmaria
@learnarabicwithmaria Жыл бұрын
You deserve all the respect, I really think a man who is calm and patient to fix things will be a wise man
@unangelitoguardian
@unangelitoguardian Жыл бұрын
That watch looks so simple from the outside, but so complicated from the inside. How u managed to take it apart and put it back together is a feat of mastery.
@Watcheyes
@Watcheyes Жыл бұрын
Well written words Angel. Many thanks :)
@alexandreperisse9921
@alexandreperisse9921 Жыл бұрын
Meu Deus... que trabalho maravilhoso! Parabéns, meu caro!
@stephantranquille6681
@stephantranquille6681 Жыл бұрын
Always a pleasure to watch you at work in your micro world. A true artisan x
@1fineamerican970
@1fineamerican970 Жыл бұрын
Pretty amazing presentation. From the deconstruction and subsequent reconstruction of the timepiece to the impressive editing. Well done indeed.
@jerryx2000
@jerryx2000 Жыл бұрын
Man I followed your instructions and rebuild the same watch. It turned out better than in Switzerland. I have now 21 screws remaining. If anyone wants to buy them pm me.
@zilopipo
@zilopipo Жыл бұрын
Beautiful work! And the moving last goodbye shot... let's dry our tears all together, and thank you for sharing your time (mpff)
@Watcheyes
@Watcheyes Жыл бұрын
Many thanks Gilles 😊 And thanks for commenting.
@victorprietoiglesias2846
@victorprietoiglesias2846 Жыл бұрын
Es impresionante tu trabajo,es de admirar,si todo el mundo trabajase así en sus labores…el mundo funcionaría de otra manera
@frankdaneluzzi3503
@frankdaneluzzi3503 Жыл бұрын
My journey into collecting time peices began with taking apart my first Longines which was given to me on confirmation. It did not go well so my frustration ended with a hammer, I never tried to fix it a watch again. But my fascination watching experts has only grown. Thank you for another wonderful video.
@ericchamata9902
@ericchamata9902 Жыл бұрын
Absolutely amazing! was in awe just watching this beautiful time piece come to life. The skill it takes, to basically disect the entire watch and put it all back together, all those tiny screws and gears knowing where they all fit in, i headache just trying to figure how you effortlessly put them all back again it was like a math problem being solved and you still wondering how the solution was found 😄, it was like putting back together a classic vintage car with all the original parts, just awesome skills. 😃
@ericchamata9902
@ericchamata9902 Жыл бұрын
Not taking taking anything away, i was hoping to see the finished restoration with a leather strap on it, but still looks good 👍😊
@fulvioplatania3091
@fulvioplatania3091 Жыл бұрын
you’re the best watchmaker I’ve ever seen until now onto youtube indeed! In every moment you use the correct device, plastic, wood or brass tweezers, the correct screwdrivers, and you avoid ALWAYS TO LEAVE SOME SIGNS onto the watch. Great Maestro!
@user-ux7rw8fs3d
@user-ux7rw8fs3d Жыл бұрын
Try watching: www.youtube.com/@RedDeadRestoration www.youtube.com/@WristwatchRevival
@fulvioplatania3091
@fulvioplatania3091 Жыл бұрын
@@user-ux7rw8fs3d I know the first one…he’s a maestro too, but the 2nd one is worse than a tragedy!
@lukelucky3521
@lukelucky3521 Жыл бұрын
try Nekkid Watchmaker, he is unbelievable, this guy here is actually top notch too. WristwatchRevival is not bad, but this guy and Nekkid are something else.
@fulvioplatania3091
@fulvioplatania3091 Жыл бұрын
@@lukelucky3521 sure...I know him from UK but originally probably from India: another Maestro too
@lukelucky3521
@lukelucky3521 Жыл бұрын
@@fulvioplatania3091 he is one of very few that do actual repairs of pieces that seem to be beyond point of return. I highly appreciate his mini lathe skills and dedication. Clean ups alone are just not enough for me, but that is matter of preference. What amazes me the most is micro machining and precision fitting. And there is the commentary too :) have a good day.
@yeba1968
@yeba1968 Жыл бұрын
I immediately recognized the watch. Used to have one throughout my childhood till my early teens. Truly it was a tank. My uncle was the agent. Brought back good memories.
@Mr_Fahrenheit
@Mr_Fahrenheit Жыл бұрын
Amazing to watch you work and see all the equipment that you use, I remember my father fixing watches back in the 1960s, he did it as a hobby with very little equipment, most of the things he used he had made himself, he used lighter fuel for cleaning parts and metal polish to clean the glass he also used nail varnish as a thread seal, he would sit for hours fixing them for friends and relatives and enjoying every minute of it, he had a table with a white cloth on it that nobody was allowed to touch and he would lay out all the parts and replace them in reverse order your video invoked such happy memories Thank you for posting this.
@user-rm9yj6th1d
@user-rm9yj6th1d Жыл бұрын
Очень захватывает просмотр. Часовой мастер высокого уровня. И руки и голова на месте. Уважение и пожелание удачи в творчестве!!!!
@nitehawk4067
@nitehawk4067 Жыл бұрын
Such a solid machine as you stated. Fabulous job.
@Watcheyes
@Watcheyes Жыл бұрын
Many thanks Nite 😊 🙏
@shakedlw3394
@shakedlw3394 Жыл бұрын
It's amazing to see the amount and variety of jigs that are being used in the process.
@Watcheyes
@Watcheyes Жыл бұрын
Thank you Shaked :)
@rainerspeidel836
@rainerspeidel836 Жыл бұрын
Incredible work. I can't believe that it can be brought back together. Now I understand the price each revision of my watches costs.
@2803ftm
@2803ftm Жыл бұрын
Ожившая история! Спасибо за Ваш труд и замечательный ролик :)
@jt9498
@jt9498 Жыл бұрын
Quite the amazing transformation! Beautiful work!
@Watcheyes
@Watcheyes Жыл бұрын
Thank you J T and thanks for taking your time commenting. Have a good evening!
@brunoaraujo6442
@brunoaraujo6442 Жыл бұрын
Restauração incrível, parabéns!!!
@jatco84
@jatco84 Жыл бұрын
A great restoration of a wonderful piece. Looks and runs like new. Kudos to you..!
@TheAaronfarrington
@TheAaronfarrington Жыл бұрын
He just kept leveling up! At first I was like this guy and his back yard hobbies but he kept bringing out better and better shit and more and more pieces. I watched every second completely mesmerized. Wife: "what are you doing"? Me: " watching someone fix a watch" Wife: "....of course you are" That was amazing. I want to buy that watch
@tacfoley4443
@tacfoley4443 Жыл бұрын
Wonderful to watch this robust-looking piece restored to almost as good as new! I have a 1971 Omega Flightmaster with much the same shape of case, except that mine looks a couple of years old, not as though it had been found in a concrete mixer! You made a very fine job of restoring that complex shape.
@cflmaior
@cflmaior Жыл бұрын
First of all, I commend you in owning the "jewel of the crown" of the Omega line. (I even hope yours is the C-910 with the 24-hour dial at 9 o'clock, rarer than the C-911, which has a 60-second dial at this location.) Secondly, comparing the complexity of this model of Certina to a Flightmaster sounds like comparing a typewriter to a Linotype. (There is no anachronism in this, as the four are of the same vintage.)
@tacfoley4443
@tacfoley4443 Жыл бұрын
@@cflmaior Yes, I'm wearing it today and the dials are as you describe! About ten years ago I sent it to an Omega repair facility here in UK for a service, and when it came back, all the colour-coded pushers hade been replaced with plain Omega pushers. I complained about this and was told that it was a matter of policy to replace older parts with new ones. I wrote to Omega in Switzerland about it, but never got a reply. I found some replacement pushers in Australia for about £200, and it cost me another £200 to have them installed. That, plus the £800 for the service, wiped the smile off my face, for sure.
@cflmaior
@cflmaior Жыл бұрын
@@tacfoley4443 Large watchmakers such as Omega, Tag Heuer, Longines etc. very rarely respond to individual letters (I have written many such since 1969 and only once got an answer). Perhaps you did not send your watch to an "Omega Service Centre", but to an "Omega Certified Repair Shop". When dealing with collectible pieces such as yours, official Centres know that such substitutions (f.e. regular pushers for colour-coded ones) would ruin the valour of your watch. The only exception is whether they have to replace the dial: the 910 originally had tritium in the markers, and Omega does not work with tritium nowadays. If you see a 910 with "SWISS MADE" written below the 6 o'clock position, instead of "T SWISS MADE T", you know its dial has been replaced - and the value correspondingly debased.
@user-py2ik5ho9n
@user-py2ik5ho9n Жыл бұрын
Spring round box set, acryl watch drop convex glass, crown, time dial panel, pin are available now. What a good time! Yes
@dyazgan
@dyazgan Жыл бұрын
Amazing craftsmanship. It was a joy to watch your work. Truly fascinating.
@darrenjones2070
@darrenjones2070 Жыл бұрын
Beautiful watch!
@Watcheyes
@Watcheyes Жыл бұрын
Indeed Darren, thank you! Have a good day! 😀
@darrenjones2070
@darrenjones2070 Жыл бұрын
@@Watcheyes you too! Have a great day also!
@nevillewilliams3666
@nevillewilliams3666 Жыл бұрын
I loved watching your exemplary work on that beautiful watch. I could watch it 100 times over and still wouldn't have the confidence to be able to put it all back in the right way but watching your work was an art form. Keep it up and do you ever sell any of the watches which you repair?
@Aco747lyte
@Aco747lyte Жыл бұрын
I'm extremely pleased with your fine workmanship of this lovely Certina DS-2, restoring the timepiece to its original beauty. A month ago my teenage watchmaker daughter restored an identical Certina model, making me proud of her skill and meticulous care. She used to have severe OCD, but the organized way of watch restoration has helped her enormously. She watched this video with glee, remarking on your wonderful restoration of which she thanks you. As do I. Wishing you all the best, with thanks from Wendi and daughter Billie, UK 🌻🌻
@Watcheyes
@Watcheyes Жыл бұрын
Wow what a beautiful story, many thanks for sharing it! I'm glad it worked out good for your daughter :) Best wishes for you all from Sweden /Josef
@Aco747lyte
@Aco747lyte Жыл бұрын
@@Watcheyes Thank you and may God bless you! ❤
@Watcheyes
@Watcheyes Жыл бұрын
@@Aco747lyte many thanks sir:)
@mushtaqali537
@mushtaqali537 Жыл бұрын
I am fascinated watching this ! Minute meticulous job with a lot of love & patience and what great satisfaction after that. Bravo !
@j.r.r.toking
@j.r.r.toking Жыл бұрын
This is the first video I have seen from your channel. I was completely awestruck with your skill, precision, and craftmanship. Your videography and presentation is very engaging as well 👍
@Watcheyes
@Watcheyes Жыл бұрын
Wow, very kind words J R R, I'm very happy that you liked my video, a big thank you! And thanks for commenting have a great day! 😀
@lollo1973
@lollo1973 Жыл бұрын
this video is pure poetry. I love it
@Watcheyes
@Watcheyes Жыл бұрын
@@lollo1973 many thanks for your kind words, very inspiring!
@calbudd2838
@calbudd2838 Жыл бұрын
The precision involved here is insane. I'm definitely hitting the like and subscribe button.
@Watcheyes
@Watcheyes Жыл бұрын
Many thanks :)
@cesarmeraz1450
@cesarmeraz1450 7 ай бұрын
I watched the entire video! Bravo Bravo Maestro!!
@arsinoeivlostprincess4228
@arsinoeivlostprincess4228 2 ай бұрын
I've watched quite few various watch resto vids. I've taken a few apart and put them back together again. First I've seen that I can recall someone adjust the lever above the hair spring. I like the oiling part you went right through it a lot of people stop and talk about the grease and the various wights of oil in the right places but you went right through which was good. It was pretty self explanatory. Thanks! I learned quite a bit.
@sphaera3809
@sphaera3809 Жыл бұрын
Amazing restoration work!! ❤
@Watcheyes
@Watcheyes Жыл бұрын
Many thanks 😀
@GreenTrishkin
@GreenTrishkin Жыл бұрын
Обожаю такие виде и такую работу, аж самому хочется научиться так все делать, терпения запас есть большой, остальное теория и практика и красота, научил бы кто!))) Благодарность автору видео, продолжайте в том же духе, приятно смотреть!
@deni2s
@deni2s Жыл бұрын
Все тут - kzfaq.info/love/7vSOnpUocYq0z8oiYFk0zQ
@ickatek
@ickatek Жыл бұрын
С разбором механизма выпендрёж , всё проще . Чашка петри и хороший чистый бензин , заводишь часы кладёшь в бензин , даёшь сутки походить в бензине ,вся грзь на дне чашки и так пару раз затем смазываешь .
@GreenTrishkin
@GreenTrishkin Жыл бұрын
@@ickatek Нет ну согласитесь,. у каждого своя приспособа, свои методы и своё видение на реинкарнацию часов) Ваш метод и ваше видение мне тоже нравится) Сам то я побоюсь все это делать, НО хотел бы попробовать под присмотром человека который не раз такое вытворяет))
@casadellabatteriafabiobedi4746
@casadellabatteriafabiobedi4746 Жыл бұрын
Good job ! I would watch all day, when I see these works of precision and patience they enchant me!😊😊
@luapcilgan9070
@luapcilgan9070 Жыл бұрын
That was very relaxing and inspiring to watch (no pun intended). I enjoyed seeing this wonderfully crafted item given new purpose. I also very much admire the steady hand and meticulousness needed along with the patience to see it through. Well done! Great way to end 2022. Thank you!!
@Watcheyes
@Watcheyes Жыл бұрын
Many thanks Luap! 😀
@TheBlackHoleOfVideo
@TheBlackHoleOfVideo Жыл бұрын
Absolutely amazing work!!
@Watcheyes
@Watcheyes Жыл бұрын
Thank you 😊
@PoulpeViolet
@PoulpeViolet Жыл бұрын
Quel travail de précision et de patience, mon dieu... Tous mes respects.
@Watcheyes
@Watcheyes Жыл бұрын
Wow, thank you for the kind words Seb, have a great day! 👍
@PoulpeViolet
@PoulpeViolet Жыл бұрын
@@Watcheyes you're welcome 😊
@tomjaasko6878
@tomjaasko6878 Жыл бұрын
Beautiful work! I just bought a beat up DS2 from 1970 and want to have it restored to save it for future generations.
@Watcheyes
@Watcheyes Жыл бұрын
Nice Tom, many thanks, please tell how the DS2 turns out :)
@mikemcgrath6150
@mikemcgrath6150 11 ай бұрын
The things we take for granted. Its incredible what ppl were able to invent.
@sadmankabir6676
@sadmankabir6676 Жыл бұрын
Great work. 👍
@Watcheyes
@Watcheyes Жыл бұрын
Glad you liked it Sadman, have a great day!
@georgehughes2183
@georgehughes2183 Жыл бұрын
Great video, great result. Don't care much for the sound effects. The quality of your work doesn't need them. Keep it up !
@Watcheyes
@Watcheyes Жыл бұрын
Many thanks George :)
@carlosconcepcion-taylor5511
@carlosconcepcion-taylor5511 8 ай бұрын
You are an absolute unit! I had to pick my jaw off the floor.
@greszprez
@greszprez Жыл бұрын
Incredible precision. I can watch this endlessly.
@luisbarrera9329
@luisbarrera9329 Жыл бұрын
Excelente trabajo , me gustó mucho como dejaste el reloj Certina⌚️.
@Watcheyes
@Watcheyes Жыл бұрын
Many thanks, Indeed, Certinas are great, built with great quality ;) Have a great day!
@Miro0711
@Miro0711 Жыл бұрын
Hey, thank you so much for this video. I only skipped though some videos in here and wanted to stay a few seconds to see what you're doing in this video. To see, how amazing this watch looks like after your make over. I enjoyed watching your work. I'm repairing Smartphones but on this I'll never have a try. Amazing. It's so mind-blowing how these tiny parts fit together and work perfect after such a long time. If everything would be build witch that much love and perfection. As I said, thank you for your video, keep on doing this. See you at the next one.
@Watcheyes
@Watcheyes Жыл бұрын
Glad to see such a kind comment Daniel, many thanks for that. Hope to see you on next one also, I'll do my best :)
@joaoalbertodosanjosgomes1536
@joaoalbertodosanjosgomes1536 Жыл бұрын
Amen.
@jumbojaz
@jumbojaz Жыл бұрын
Awesome work! Thank you for explaining it through!
@ghislainecarolenicod9746
@ghislainecarolenicod9746 Жыл бұрын
I'm fond of watches and always surprised and amazed for their so complex and beautiful mechanism. It's a little world apart.
@Watcheyes
@Watcheyes Жыл бұрын
Indeed, well said, thank you
Restoration of a $100,000 Rolex GMT From 1958!
52:26
Wristwatch Revival
Рет қаралды 6 МЛН
GADGETS VS HACKS || Random Useful Tools For your child #hacks #gadgets
00:35
Extreme Restoration With Unbelievable Result!
37:28
Magic Watchmaking
Рет қаралды 484 М.
Burned Rolex Restoration 🔥 Unbelievable Before and After!
9:29
Roman Sharf
Рет қаралды 1,9 МЛН
This Hamilton Railway Pocket Watch Gets an Incredible Repair!
26:01
C Spinner Watch Restorations
Рет қаралды 43 М.
Restoring a vintage 1940s Oris watch (Barn Find)
25:12
Nekkid Watchmaker
Рет қаралды 219 М.
Restoration of a Seiko Watch - Historically Important Wristwatch
21:18
Richard Perrett Watchmaker
Рет қаралды 307 М.
Самый маленький игровой ПК
0:46
ITMania - Сборка ПК
Рет қаралды 581 М.
Распаковка айфона под водой!💦(🎥: @saken_kagarov on IG)
0:20
Взрывная История
Рет қаралды 10 МЛН
The PA042 SAMSUNG S24 Ultra phone cage turns your phone into a pro camera!
0:24