💡The Boy Genius Restores The Giant KOMATSU Wheel Loader // Complete Restoration Of KOMATSU Excavator

No video

💡The Boy Genius Restores The Giant KOMATSU Wheel Loader // Complete Restoration Of KOMATSU Excavator

Рет қаралды 1,449,718

Күн бұрын

The genius mechanical boy repaired and restored the entire giant Komasu wheel loader in 186 days without stopping.
The story is about a skilled mechanic who demonstrated his extraordinary abilities by repairing and restoring a giant excavator without taking a single day off for 186 consecutive days. The task was daunting, but the genius mechanic persevered, working tirelessly to ensure every part of the machine worked perfectly. With careful attention to detail and a deep understanding of the machine, the mechanic was able to overcome all obstacles and restore the komatsu wheel loader to its former glory. His dedication, skill and hard work are truly remarkable and he sets an incredible example of what can be achieved with perseverance and expertise. success makes everyone The world is amazed by the genius mechanic
► Contact Me: wtgroupvn@gmail.com
Thanks for watching, LIKE, Subscribe & Share!
► Subscribe to channel: bit.ly/3mG3rQi
►Restorations Tools: bit.ly/3J5CVHS
© Copyright by Restorations Tools
I hope you find something useful and enjoy this movie! I am pleased with your feedback, advice and suggestions for improvement.

Пікірлер: 357

@restorationstools6447 16 күн бұрын

See more of my recovery products here: 👉 kzfaq.info/get/bejne/aZ18Y6eelb_MhmQ.html 👈

@randyforgey8818 3 ай бұрын

My dad was born in 1918. He grew up learning to use what you had. Was a very good mechanic. Junk yard for parts. Cleaning plugs until just wouldn't work. Making own plug wires. Always a tool kit in car. Making do. Wasn't a bad life.

@obelix437 3 ай бұрын

Bravo pour la POLLUTION les gros caves

@TakDymau 3 ай бұрын

Дизель , гидронасос , втулки и пальцы, шины - всё в очень плачевном состоянии. Этому погрузчику не дитйлинг был нужен - а реальный капитальный ремонт ☝️🥸

@Mikolius1985 3 ай бұрын

Там походу что то с трансмиссией, ибо в конце видео карой толкают его.

@fouadmida2230 3 ай бұрын

No grease on the gears or any Joint !!!!!! 1:19:54

@kansasprairieforge2918 3 ай бұрын

Love how they just painted over the dirt and grease. That will really work. And the clutch packs! Just a wire wheel clean,😂. You can tell that they don't care if it's going to last. A lot of work for nothing!!!!

@theragabash37 18 сағат бұрын

3:03:08 when he moves, you can see the center pivot bearings are shot, the front and back halves move apart.

@richardbarnes9593 3 ай бұрын

Two worn tyres, an engine that smokes, at least 5 worn pivot pins between the lifting arm and shovel, not to mention at least seven missing wheel bolts , does not make a complete restoration.

@justinmcclanahan6036 3 ай бұрын

The 2 worn tires should've been both up front & the tires with the good tread on the back,but they put them on like it came in, but they put the back tires up front & the front tires on the back

@lucasdeoliveira7285 2 ай бұрын

E só pra fazer vídeo

@greggmcclelland8430 Ай бұрын

@@justinmcclanahan6036 The front tires need the tread. Wheel loaders need the traction up front when loading. The rear tires tend to lift off the ground when digging, so traction helps more on front.

@outdoor044 Ай бұрын

Seemed like the smoke cleared up. Maybe that was just from oil soaked piston ring and whatever they uses when sliding the pistons in.

@tranqu Ай бұрын

@@greggmcclelland8430 yes. but they put the two tires who had some tread left to the vehicles right side. Where the camera was. So that it looked better for the video. Just as the thing could not drive by itself. Needed to be pushed by the forklift. You can see the fork in the left part of the video. "With careful attention to detail and a deep understanding of the machine, the mechanic was able to overcome all obstacles and restore the komatsu wheel loader to its former glory" Attention to detail my ass.

@enochpowel3030 3 ай бұрын

Your obviously working on a tight budget. Because of that you did a good job.

@tomtribur458 3 ай бұрын

Now we know how the ground water gets contaminated with chemicals.

@user-vp6pq4ki3v 3 ай бұрын

Даже бронзовые втулки и пальцы не поменяли всё болтается, это даже не реставрация а пародия какая то.

@Mitya-RUS 3 ай бұрын

Сальник за маховиком ещё послужит...🤣

@kymar_nakyrov 3 ай бұрын

Всем пох@й на ремонт, главное просмотры на ютубе

@dadgarage7966 3 ай бұрын

A minute in, a guy is standing in the most dangerous place on the truck, at the mercy of the crane operator.

@howie4150 3 ай бұрын

And can you believe he's not wearing flip flops?

@user-lr7cr1bg3r 3 ай бұрын

All those worn pins should have been replaced or machined. Most of this is clean and paint.

@Hoa-Mechanical 3 ай бұрын

👍👍👍👍👍👍👍👍😄😄😄😄

@keizer3452 3 ай бұрын

Those pins don’t wear out dude

@theragabash37 18 сағат бұрын

@@keizer3452 Are we looking at the same pins at 8:20?

@user-hi5xe1ok6r 3 ай бұрын

Did a good job rebuilding the engine but screwed up on lapping the valves. Once a valve is lapped to the hole, that is the only hole that it seals properly in. If he does a compression test, he is going to have random pressures across the cylinders because the valves are mismatched now. Since he lapped all the valves then took them out and didn't keep them in order, he just threw them into a pile with no order. Also were the new cylinder sleeves honed for the cross-hatch. The sleeves that I have seen aren't honed when brand new.

@awake.collective 3 ай бұрын

I thought so too although he then puts them back in specific spots, must have them marked. Running it right after rebuild for a decent amount of time with no coolant didnt feel right

@user-hi5xe1ok6r 3 ай бұрын

@@awake.collective what i saw was him just plunk the valves in. He did stop and glance at the rest of them because the intake and exhaust are different sizes. Running the engine as long as he did without cooling, I don't think would hurt it because he probably filled the block with water. If you noticed the water and hose there. When he was cranking the engine white smoke came out of the turbocharger from both sides. That shows that the valves weren't in order causing blowby and low compression

@norbertcoy1775 3 ай бұрын

Sehr gute Mechaniker hervorragende Restauration

@Hoa-Mechanical 3 ай бұрын

👍👍👍👍👍👍

@99Sad.memories 3 ай бұрын

Amazing he brought this yellow monster to life ❤️‍🔥🤯

@lenochliny8261 3 ай бұрын

Gray smoke from a diesel engine means badly burned diesel.

@Hoa-Mechanical 3 ай бұрын

👍👍👍👍👍👍👍👍👍👍

@user-vp6pq4ki3v 3 ай бұрын

Главное всё хорошо покрасить и в металлолом сделать

@user-mx2ll9mm1s 3 ай бұрын

Молодцы! Проведена хорошая работа. Можно ставить в музее дорожной техники на постамент. Он своё отработал.

@SintaoBG 2 ай бұрын

Восхитительное восстановление!!! Этот трактор будет жить! Вы молодцы! Позволю себе немного критики: грунтовка не нейтрализует ржавчину. Под ней все продолжит жрать железо.

@marikantiuppalaiah6917 6 күн бұрын

Hard work can change everything 🎉🎉🎉🎉🎉🎉🎉🎉

@Mitya-RUS 3 ай бұрын

Предпродажная подготовка...🤣

@douglashairston7808 Ай бұрын

Boy! They brought life back into that bulldozer. Great job!

@gr1mrea9er82 Ай бұрын

That is a wheel loader. Not a bulldozer. Bulldozers have tracks.

@douglashairston7808 Ай бұрын

@@gr1mrea9er82 Okay. Thanks. I made the correction.

@Harleyworkshop 3 ай бұрын

Nice look at the mechanics

@user-vp6pq4ki3v 3 ай бұрын

От бога 😂😂😂😂😂😂

@Hoa-Mechanical 3 ай бұрын

❤❤❤❤❤❤❤❤❤❤

@claytonwason3488 3 ай бұрын

You know, you might as well drag that down of the Creek and wash it there. So that's just gonna end up there anyway.❤

@kriskris9330 3 ай бұрын

I’m only upset by the paint job. Looks like it’s from McDonald’s

@paulmoxon8839 3 ай бұрын

Why you so upset bro? Does it clash with your uniform…..!!!!! What an absolutely stupid thing to say after all the effort that this guy has put into it….

@kriskris9330 3 ай бұрын

@@paulmoxon8839 hahahahahaha I’m still laughing. It looks ridiculous bro

@Ashramint 3 ай бұрын

@@paulmoxon8839😊😊😊😊😊😊😊😊😊😊😊😊😊

@user-mo3iz4nz4v 2 ай бұрын

Why the cabin is white doors orange and the rims red🤯🤔🤣

@themusicman-ij7op 2 ай бұрын

Maybe McDonald’s donated the paint 👍👍🤭🤭

@Manufacturingsite1 3 ай бұрын

Hello everyone have a great day

@pelaginos05 Ай бұрын

Parece que não trocaram nem as mangueiras da hidráulica. E não passaram uma graxa nas juntas. Agora é esperar visualização para ver se dá para dar entrada em uma nova.

@erno9248 2 ай бұрын

Endeavoring with perseverance... Well Done... Thanks...

@ahmedhamed3855 2 ай бұрын

As an mechanical I'm a 1000% sure that this thing will not last a 10 hour work. Update: 10 hour is so long I will give it a 30 minutes.

@franklincalcanor.8568 3 ай бұрын

una restauracion practicamente hecha a mano felicidades

@Hoa-Mechanical 3 ай бұрын

👍👍👍👍👍👍❤❤

@user-eb3tr9qr3n 3 ай бұрын

При ограниченном бюджете и при бедности в стране эти ребята делают хорошее дело , и приносят какую то пользу .

@far_outlook 2 ай бұрын

@@user-eb3tr9qr3n It's too time-consuming to do anything effective here

@raficRafi-cr1cr 3 ай бұрын

Thanks

@richardgrahame5408 3 ай бұрын

A really great job, but couldn't you afford to replace at least the one bald tire the tires were your one real let down on a really great rebuild.

@tophitmusic1568 2 ай бұрын

❤

@user-vp6pq4ki3v 3 ай бұрын

Как в двигателе можно поменять одну гильзу, и надеятся что он будет работать, и колотить по подшипника 🤦🤦🤦🤦🤦🤦

@mikestarkey7989 3 ай бұрын

Does he replace any bearings or seals?

@user-ty6cz6jc1f 3 ай бұрын

These kind of lads are what you find up bush and will fix most things with a half dead battery and a piece of wet rope. Have personal experience of riding through N/E Thailand when my Harley threw a piston. The girlfriend soon found a guy all sorted in 24 hrs dirt cheap and so helpful.

@daniel36847 22 күн бұрын

Chlapi veľmi sú šikovný 😊

@ShannonFreng 2 ай бұрын

That's a complete restoration there, complete with bald tires.

@sergiodonizeti7119 3 ай бұрын

São vietnamita esse pessoal profissional sou seguidor deste canal parabéns pelo trabalho de vocês

@Hoa-Mechanical 3 ай бұрын

👍👍👍👍👍👍👍👍

@PatrickGeorge-j8f 9 күн бұрын

Notice how he just washes all that oil and gas into the dirt but did a good job on this restoration

@blackalaskal3372 3 ай бұрын

You got the engine running and restored the body…..but why was the forklift pushing and pulling you 😂😂😂😂

@alcopower5710 3 ай бұрын

Transmission issues I suspect. Had to fast forward to the end to see.

@donaldwheeler4355 3 ай бұрын

Transmission valves will be plugged up in 10 minutes . You haven’t done anything to repair it. That’s ok the engine won’t last a week . The paint will probably fall off for shame.

@SilentStorm21 2 ай бұрын

it never worked its being pushed by the forklift

@abackimages5351 Ай бұрын

Yeah, it’s a hack job for sure

@TheRoger242 2 ай бұрын

Buy sandblaster. It will help a lot with paiting !

@Mad.Man.Marine 3 ай бұрын

Should have been titled “mechanic” does spray bomb overhaul but fixes nothing. 🤦‍♂️🤮

@juansalmeronmoya Ай бұрын

Cooling fan mounted with reverse blade, epic.

@humptydumpty9177 2 ай бұрын

Who needs a workshop when you have a piece of 3 foot by 1 foot vinyl flooring!

@alilaayouni3280 3 ай бұрын

Beaucoup d éffort pour un très grand restauration.tres bien .bon courage.

@user-nc7jt9rb5m 3 ай бұрын

As rodas de amarelo combina mais e fica mais bonita.

@SKILLSSAWMILL 11 күн бұрын

Awesome cool ❤❤❤

@mgs935 3 ай бұрын

Amazing work , congratulations

@coffmanlove2020 20 күн бұрын

Awsome job nice work

@marvinjgerald6007 3 ай бұрын

Only thing restored was the ICDE. The rest of the project was essentially lipstick on a pig.

@user-hi5xe1ok6r 3 ай бұрын

Seeing the engine smoking and missfiring I would say low compression because the sleeves weren't cross-hatched and him mixing up the valves screwed up the work he did. Another thing he should have done is put locktite on the flywheel bolts.

@gurwindersingh-te5bl 3 ай бұрын

One tyre condition not good sso why you didn't change old tyre only time pass video and your work also

@antonioortiz8443 3 ай бұрын

Didn’t grease, and a bad operator!

@nicolasparacchini 3 ай бұрын

Genios totales 👍👏👏 saludos

@DennisEhv 3 ай бұрын

Is it allowed to let all the fluids from the engine run free in to the ground outside. Here we need to drain the fluids in barrels.

@Vontharau47 2 ай бұрын

Bro they are in china - nobody gives a fck about the environment there

@kvrmanu4359 Ай бұрын

Really great hard work... 👏👏

@user-sv8lz3xr9n 3 ай бұрын

покрашенный металлолом.. "гениальность " зашкаливает

@kymar_nakyrov 3 ай бұрын

Досмотрел до момента где он ковш "чинит" и выключил,очередная "рестовраторская" шляпа

@user-fw4kt7cl3p 3 ай бұрын

Awesome job

@youssef3800 2 ай бұрын

Many colors: black, white, yellow, red, orange, and the engine is blue😳😳😳

@patdela7560 3 ай бұрын

Super 👍

@Jessicayang-kc6ii 3 ай бұрын

He works very hard.

@keizer3452 3 ай бұрын

Very nice work❤

@Greekman72 3 ай бұрын

Great job guys! Congratulations from Greece.

@TommyJensen-pl8qz 3 ай бұрын

Good job

@Hoa-Mechanical 3 ай бұрын

so great ❤❤❤❤❤❤❤❤❤❤❤❤👍👍👍👍👍👍

@King_TuTT 3 ай бұрын

I like the colors. lots of good work

@brunorault1199 3 ай бұрын

Bon travail

@gregshirk7220 3 ай бұрын

Wonderful . Great work. Loved watching you men!!

@avatarelpresidente3333 3 ай бұрын

Ur good u r there u help a lot of people to fix anything. Ur country needs u there to help people do their job easier. Keep up d good work ❤🎉😊

@Hoa-Mechanical 3 ай бұрын

👍👍👍👍👍👍👍👍👍👍

@mitchbug420 Ай бұрын

Kind of figure that hydraulic? Was on the wrong way on the bucket? At 2:58:53 And then they must have figured it out too, because it was on right the next time I seen it 3:01:42 And you guys do great work. Man, that was an awesome project you guys did there. Awesome work.

@jpwalla 3 ай бұрын

Pretty awesome to save that ole piece of iron. I don't understand the color scheme, but overall pretty sweet revival.

@RDevx70 3 ай бұрын

Remind me not to eat the fish out of the local stream!😂😂

@joerodrigues3816 3 ай бұрын

That’s so bloody amazing work mate good job amazing work keep it up good luck with your new project

@marivaldooliveira8441 3 ай бұрын

Parabéns amigo admiro sua inteligência vc é realmente um oriental

@francoisbouchard602 3 ай бұрын

Nice job Nice Loader good show 😃👏👏👏👏👍👍👍👍👍😍

@thomasbordi8726 3 ай бұрын

If they don't get it to dealership s like this they're making a big mistake, they will be able to make up for the next year a win win in the USA!!!!!😊

@ntpowertools9199 3 ай бұрын

garderner!

@freddybernal9534 3 ай бұрын

👍👍👍👍👍👍👍👍

@avatarelpresidente3333 3 ай бұрын

D best master mechanics of all time 🎉🎉🎉

@Hoa-Mechanical 3 ай бұрын

👍👍👍👍👍👍

@alilaayouni3280 3 ай бұрын

Joli travail .bravo

@AgricultureTechUS 3 ай бұрын

Totally unexpected, science never ceases to amaze me.

@SkillMasters-vy2lo 3 ай бұрын

Amazing video ❤

@senainismail2272 3 ай бұрын

Yes good job...

@Hoa-Mechanical 3 ай бұрын

👍👍👍👍👍👍👍👍

@rafaelcastillo1998 2 ай бұрын

Grey smoke blowing from turbo isn't a very good sign.

@R4TeT 3 ай бұрын

Good work!! Valves should go on the same seat you polished

@abackimages5351 Ай бұрын

Hammer drill, cover patches with full plates etc

@user-zq7bv5dr3g 3 ай бұрын

nice, hello from Russia. 👍👍👍

@andrewgrace4410 3 ай бұрын

Enjoyed this video, nice work guys😊

@abackimages5351 Ай бұрын

Wire wheel sand paper would be helpful

@elimorales5363 3 ай бұрын

ESTA ATERMINADO QUE DESIA LLO COM DIOS BALOR CORTESIAS

@Hoa-Mechanical 3 ай бұрын

👍👍👍👍👍👍👍👍

@goboyz8016 Ай бұрын

Man I must say, ya'll don't f..k around when it comes to getting things done. I am so impressed they way you guys just buckle down and take care of business. I love it. Amazing work. We here in the U.S. could learn a lot from your work ethic and willingness to take used up equipment and turning it into something useful. We just throw shit away and buy a new one. Most of the time the new one is more work and cost more to maintain then the old ones. Hell with all the computer crap now you can't even work on the darn things anymore. When they break you just have to call the man to fix it. Well done boys.

@restorationstools6447 Ай бұрын

Thank you for your encouragement. Positive words of encouragement make us more motivated

@Praise___YaH Ай бұрын

Guys, here is our True Savior HalleluYAH translates “Praise ye YaH” YaH is The Heavenly Father YaH arrives via the TENT OF MEETING YaH was Who they Crucified for our sins YaH was Crucified on an Almond TREE Semitic of Moshe (Moses) Isa Scroll (The Original Isaiah) Isaiah 42:8 - I am YaH; that is my Name! I will not yield my glory to another or my praise to idols. Isaiah 43:11 - I am YAH, and there is no other Savior but Me. Isaiah 45:5 - I am YaH, and there is none else.

@williambrown6967 26 күн бұрын

A great job all things considered! Necessity is the mother of invention. However, I don't understand why people disassemble machines and motors without first thoroughly cleaning them with a power washer.