Restoring 1977 R2-D2 Radio Controlled Robot - Star Wars Toy Restoration

  Рет қаралды 878,042

Odd Tinkering

Odd Tinkering

Жыл бұрын

Restoration of a R2-D2 rc toy from 1977. I will restore and repair this droid to the shape it was long time ago in a galaxy far far away. The toy has some cosmetic issues, teh dome has lost it's shine and plastic has yeellowed, but also some technical issues. It's only making the sounds, not moving and the controller is not working perfectly.
I started by fixing the controller. It was an easy fix since the contacts just needed to be cleaned. After I got the controller working the toy itself was still only making sounds and not moving. This was resolved by oiling the motors and turnign them. In time all sorts of dirt and dust and rust collect in the motors and those prevent it from turning. The motors are not strng so even a little dirt can cause issues.
I fixed the yellowing plastic with process called retrobrigting that uses a chemical proicess to remove the yellowing. Here's my tutorial about it: • How to remove yellowin... and my tutrial on makign the retrobrighting box: • Making the Ultimate Re...
To fix the dome I needed to metal plate the plastic with real metal. The reason for this is that there are no good mirror chrome paints. There are however systems that look like a paint gun and you spray on liquids that make real metal deposit on the surface. Those systems are very expensive and I wanted to learn how to electroplate metal. I used a conductive paint to coat the plastic, then I copper plated a thicker surface that can take a bit of sanding and sanded and polished the surface. Finally I plated the copper with palladium. Here's the video of the power source: • Making Simple Variable...
Finally I printed out some new stickers and cleaned rusty parts with vinegar in my ultrasonic cleaner. If you want to make your own, here's how I made mine: • Making My Own Ultrason...
Thanks for watching, I hope you enjoyed the video!
The bellow links to amazon are affiliate links. I get a small fee of anything you buy after clicking them, but you pay no more than without clicking. This is a great way to support my channel.
---------------------------------------------------------------------
Check out my Instagram: / odd.tinkering
T-Shirts: teespring.com/stores/odd-tinkering-2
Support me on Patreon: / oddtinkering
SOME TOOLS FROM THIS PROJECT:
Screw driver set: amzn.to/3WB3YjP
Copper paint: amzn.to/44XJBSt
3D Printer: shareasale.com/u.cfm?d=108542...
Soldering Iron:amzn.to/3qH2ogq
Mini sander: amzn.to/3nSDbn7
Electric screw driver: amzn.to/3HmRAgn
Prying tools: amzn.to/3HkFSmt
Isopropyl alcohol: amzn.to/42vUdX0
Hydrogen peroxide: amzn.to/3O5qOyF
99.9% isopropyl alcohol (IPA): amzn.to/34Po8dX
---------------------------------------------------------------------
SUBSCRIBE ▶▶▶ / @oddtinkering
---------------------------------------------------------------------
#restoration
#repair
#starwars
#asmr
#tech

Пікірлер: 985
@InTeCredo
@InTeCredo Жыл бұрын
I had this one for Christmas present in 1978. My grandparents, parents, and relatives HATED it because of its irritating beeping sound. One day, the R2D2 stopped beeping, and I suspected one of them silenced it by snipping the wires while I was sleeping.
@daylightdies7194
@daylightdies7194 Жыл бұрын
That’s unforgivable if they did
@mrbuttons1243
@mrbuttons1243 Жыл бұрын
Lol. I had a similarly annoying toy that was a police motorcycle with a cop on it. Kind of a CHiPs knock off.
@BewareTheLilyOfTheValley
@BewareTheLilyOfTheValley Жыл бұрын
As an adult who doesn't want children, I even winced at the sound of this thing and could easily imagine a parent deeply regretting buying it for their kid 😂
@Aniware
@Aniware Жыл бұрын
would've did the same tbh
@daylightdies7194
@daylightdies7194 Жыл бұрын
@@BewareTheLilyOfTheValley I don’t want kids of my own either but cutting the wires on a toy because of the noise is pathetic
@Njazmo
@Njazmo Жыл бұрын
Theres actually some serious engineering involved with that thing, if it goes where the head points, and it's wireless, and it's from the 70's. Back then, cheaper remote controlled cars actually had wired remote control, so you had to walk behind it. That is truly a toy of the kings, if we look way back. Great work.
@TheLoxxxton
@TheLoxxxton Жыл бұрын
The thing I love about odd tinkering that sets him appart is the variety of skills this man has. Engineering, plastic restoration, 3D printing, electroplating, mechanical, electronics oh and no other channel has a Docktor Duck 😅
@MisterGames
@MisterGames Жыл бұрын
And laser rust removal 😀
@rapcom
@rapcom Жыл бұрын
And no annoying pussy cat.
@hyperwebster5118
@hyperwebster5118 Жыл бұрын
Fr, this guy could be an evil genius if he really wanted to. Good thing he's a little preoccupied!
@hudsonlogie6520
@hudsonlogie6520 Жыл бұрын
You mean the ducktor
@shamadayart
@shamadayart 19 күн бұрын
If you have a great passion for something, you can learn lots of skills related to it just by following that passion and creating. For example, I'm an illustrator, but I learned how to do graphic design,lettering, clothing design, book design, printing, book binding, painting, screenprinting, sculpting and designing merchandise and plushes when I never thought my art could lead me to such, I just saw others doing it and thought "I want to try that too." We're very fortunate now that we can easily access all these learning resources, specialty stores and services and be self taught.
@JedH1991
@JedH1991 Жыл бұрын
R2D2 once said “boop boop beep boop” and man did I feel that
@_MrOcean
@_MrOcean Жыл бұрын
I was there when he said it. Whaddaguy.
@lauraschlieselhuber8487
@lauraschlieselhuber8487 Жыл бұрын
To quote him : *_"WOOOOOAAAAAAOOOOH"_* Truely deep and meaninful words.
@JedH1991
@JedH1991 Жыл бұрын
@@lauraschlieselhuber8487 yes! That’s my life’s motto
@marckyle5895
@marckyle5895 Жыл бұрын
@@lauraschlieselhuber8487 His Deathscene was on the order of Brando's in Apocalypse Now. Odd worked on him back in the shop and bought him back in time for the applause.
@Rehteal
@Rehteal Жыл бұрын
Everyone overlooks his best delivered line though when he said "bipboopbeepbop" on Dagobah. Massively underappreciated.
@shaysela6989
@shaysela6989 Жыл бұрын
I love the length you go to keep everything as close to the original. Especially remaking the stickers (plz show more of the process of remaking stickers, it seems really interesting!). And now, you also have the power and magic of 3D printing! But the thing I love most about your restorations, is that they're real
@Dorelaxen
@Dorelaxen Жыл бұрын
Oh, there is most definitely a good chrome paint out there. It's simply called Mirror. It's not cheap, like 40 dollars for a small bottle, but it legit looks like highly polished chrome. Toy Polloi has used it in some of his restorations and it's truly incredible.
@jonvincentmusic
@jonvincentmusic Жыл бұрын
Thermochrome too.
@MaxRide1
@MaxRide1 Жыл бұрын
there's a slightly cheaper version that molotov do liquid chrome, they do it in markers or refill bottles. I've yet to find a way to varnish it without dulling the finish though... I don't own an airbrush so alclad's varnish won't work for me.
@Aquascape_Dreaming
@Aquascape_Dreaming 8 ай бұрын
​@@MaxRide1get an airbrush, then. If you can afford to buy and tinker with paint, an airbrush doesn't seem that expensive, by comparison.
@shawnblohm8439
@shawnblohm8439 11 ай бұрын
I still have my radio controlled R2-D2 that I got as a Christmas gift in 1978. Every Sunday I fire it up to make sure his gears don't get totally stuck. He still works, sort of. He can go forward only. Its gears in its right leg don't turn anymore. Its eye still lights up red and it still can make noises. I'm afraid to take him apart though in fear that R2 won't work at all if I try to repair him. A priceless gift from my childhood. Thanks for making this video!
@foto-nio2913
@foto-nio2913 Жыл бұрын
Some restoration videos may be fake, but i find yours quite legit and real, and you also show how you even make it with detail and care I love it, keep up the nice work!
@TELL5
@TELL5 Жыл бұрын
yep, you can tell the other channels are fake when you see how theyre posting videos very frequently and are too anonymous. odd tinkering takes his time making videos, explains his procedures, and sometimes gets sponsored with restoration products (like the laser rust remover). he treats it as a business, not some fake clickbait material
@huttjos85
@huttjos85 Жыл бұрын
I only subscribe to two restoration channels for this reason. There’s a lot of crap out there, but ODD is legit.
@marckyle5895
@marckyle5895 Жыл бұрын
@@huttjos85 what's the other one? I know some good aircraft, history and navy focused channels.
@claclaclac1
@claclaclac1 Жыл бұрын
@@huttjos85 Yeah me too, only have 2 legit restoration channels subbed, this one & @mymechanics also @Tronicsfix but he is mostly repairing and saving gaming devices and not completely restorating
@TELL5
@TELL5 Жыл бұрын
@@marckyle5895​ im not the original commenter, but theres another restoration channel i look at as well. hes called rescue & restore. the guy hasnt posted full length restoration vids in over a year and only makes shorts now about items from old time periods, but his old vids have the same level of quality as odd tinkering. if you havent seen him, i think youll love the sandblasting process of his vids
@WhiteDragon689
@WhiteDragon689 5 ай бұрын
Back at the University way back when during a EE lercture, the professor is giving a lecture writing equation the length of the board and another professor drove one of these into the class room. The guy was laughing so hard he could not teach anymore. I'll never forget that. Thanks for the memory.
@jerryziegner
@jerryziegner 8 ай бұрын
The amount of time and effort that went into this restoration is incredible. Not to mention the talent and knowledge of electronics, plastic and re-plating.
@garrettsteele1174
@garrettsteele1174 Жыл бұрын
This was the toy I always wanted when I was a kid. I think that this is the toy that helped inspire me to join the R2 builders club and build a full scale RC R2-D2.
@awesomesauce8083
@awesomesauce8083 Жыл бұрын
Kenner engineering never ceased to amaze me. The things that they did was just outstanding.
@jedikroner
@jedikroner Жыл бұрын
The force is strong with this one! Great job on the restoration, I was also a child of the 70's and had this same exact R2 unit as a present from Santa in 1978, I still have mine but the remote is no where to be found 😣
@crissy1764
@crissy1764 Жыл бұрын
Omg that ending…. Thanks for restoring R2!
@leokimvideo
@leokimvideo Жыл бұрын
Incredible work. Sadly where I live Hydrogen Peroxide at that concentration is now a prohibited chemical.
@zixea3318
@zixea3318 11 ай бұрын
Whaaaat!?!!? Where??
@zixea3318
@zixea3318 11 ай бұрын
Oh wait Omg it’s you??? I recognize your channel. I used to constantly watch you as a lil’ kid haha.
@Lialia-xf7ji
@Lialia-xf7ji 11 ай бұрын
​@@zixea3318i thought hewas fake, how tf does he not have a checkmark
@wobbled5609
@wobbled5609 10 ай бұрын
It's the same stuff found in hair bleach, can you buy it in cream form? If so just paint it on, works just as well
@alkanstvdxing
@alkanstvdxing 6 ай бұрын
australia
@milotaconella3630
@milotaconella3630 Жыл бұрын
May the force be with you…. Wonderful restoration!!
@cavalaxis
@cavalaxis Жыл бұрын
I had this exact same toy! My dad was an Engineer at NASA and he was FASCINATED by the radio controlled part. He was so fascinated, I ended up watching HIM play with it for a few hours before I ever did. Ugh, hit by the memory bat upside my head!🤣🤣
@Archeev
@Archeev Жыл бұрын
Very impressive how much you did to restore the head. Your knowledge is invaluably versatile!
@anthonyhernandez8527
@anthonyhernandez8527 11 ай бұрын
I'm so glad there's no background music and the length of the video. Stuff like this is perfect because it's educational and relaxing. I get to calmly learn about something i didn't know too much about. Thanks again
@joralexandrgoesdiniz8109
@joralexandrgoesdiniz8109 11 ай бұрын
we need more people like you. have a nice day...
@samanthadean1083
@samanthadean1083 Жыл бұрын
Perfect project for May!!! Fantastic job from you and the Ducktor!!! ❤️❤️❤️👍🏻👍🏻👍🏻
@dmomintz
@dmomintz Жыл бұрын
This guy is such a pro that he installed a WD-40 cupholder on his work bench
@paulroehl1099
@paulroehl1099 Жыл бұрын
I loved that, too. It is perfectly placed. Lol
@arcticxabyss
@arcticxabyss Жыл бұрын
you made that R2D2 toy look like it was just bought!! good job!! 👏🏻
@eloquentsarcasm
@eloquentsarcasm Жыл бұрын
Wow, talk about a walk down memory lane! Like many others here, as a kid Star Wars was HUGE back in '77, that single movie ignited a lifelong love of Sci-Fi, computers, cybernetics, robotics, the whole shebang. While I didn't have the RC version, my uncle and I spent a summer building model kits of R2 and 3PO in 1979 if I recall correctly. 3PO was about 12" tall, not sure of the scale of them, but those models held pride of place on my shelf for many years until I grew up and moved out. Beautiful restoration as always, seeing any vintage toy given new life is wonderful, but something like this really hits home, kudos!
@paulavram6319
@paulavram6319 Жыл бұрын
Incredible restoration. The plating of the plastic head was next level
@2degucitas
@2degucitas Жыл бұрын
Interesting the silver didn't stick to the copper paint. Maybe cleaning the surface with alcohol first is needed.
@oldshack
@oldshack Жыл бұрын
Absolute multitalent person, so much included into one video, eletronics, chemistry, only 3d printing needs lots understanding of design softwares. Excellent work! Always entertaining and educative
@diamond_stardust
@diamond_stardust Жыл бұрын
It's truly joy when I see another beautifully completed project. Keep up the amazing work!
@MpSkyfall
@MpSkyfall Жыл бұрын
May the force be with you... And with R2. Amazing job! 👏🏻
@fullblooded64445
@fullblooded64445 Жыл бұрын
Your restoration videos are just so mind-boggling sometimes. Great job!
@J.A.1969
@J.A.1969 Жыл бұрын
Wow. This is such a great insight into getting into all different corners and nooks of electronics. Really enjoyable video of the puiling apart and re-connection of a timeless gadget. I think my favorite parts of your video here are the cleaning out of the inside of R2-D2's dome and the refurbishing of his head. Excellent stuff. I remember as a kid, even though I had most of the figures and the 3 major spaceships and the Death Star and Land speeder which was my favorite actually, This toy was too expensive at that time and couldn't get my mom to budge. The beeping sounds turned out great in your restoration. Awesome video. 👍👍👍
@shamroc34
@shamroc34 Жыл бұрын
I got this toy for Christmas. I left the R2 unit on that night after playing with it and my mother was having a quiet cup of tea late that night after we had all gone to bed. The radio frequency used by the remote must have been the same as a garage door opener or something because it came alive and scared my poor mother half to death. I miss that little robot.
@HoldingOnDaily
@HoldingOnDaily Жыл бұрын
very iconic toy. beautiful restoration! Would be neat to see someone fabricate these gears and make them metal. would even make R2-D2 more stable when mobile.
@andreacrashe9894
@andreacrashe9894 Жыл бұрын
*A collectors item fully restored back to its former glory. May the force be with you and RD-D2 too.*
@biltrex
@biltrex Жыл бұрын
I had this toy as a kid, don't even remember when I got it. But it was super satisfying to see you restore it to glory. Especially the electrobrighting, that's an amazing process.
@sophiakaiajw2829
@sophiakaiajw2829 9 ай бұрын
2013
@loganjorgensen
@loganjorgensen Жыл бұрын
I've wanted to see you tackle something like this with your typical thorough process.🙂 Love that generic "[Blank], Do Not Drop" sticker since you could put that on anything, fruit, glass, babies.😆 Still it's so much work to full take anything apart that you might as well restore everything as close to original as you can before putting it back together. Always surprised at how much oxidation occurs on metal toy parts even when they've been relatively well taken care of.🤔 If I were a kid getting this back in '77, wow what a great Christmas or birthday that would have been.😁
@mikebasil4832
@mikebasil4832 Жыл бұрын
It’s wonderful when something very special from the past can be restored after so long. Especially when it’s a favourite Star Wars toy. Thank you for making and sharing this video. May the Force be with you.
@PeterDoesFarming
@PeterDoesFarming Жыл бұрын
It's like a holiday present when your videos pop up! Thank you so much for your hard work!!
@prophez23
@prophez23 Жыл бұрын
I had this exact R2D2 when I was a kid. I'd love to find another one some day.
@markgannett5948
@markgannett5948 Жыл бұрын
this was so satisfying to watch, I had one but it got lost over the years...you did a fantastic job restoring this great toy.
@mariacristinaalvarez9838
@mariacristinaalvarez9838 Жыл бұрын
Absolutely brilliant restoration! What a wonderful work. Congratulations!
@YTTV_Mic8
@YTTV_Mic8 Жыл бұрын
I love your restorations, they are amazing
@mandipandi303
@mandipandi303 9 ай бұрын
Possibly the coolest restoration you've ever done
@dlberker
@dlberker Жыл бұрын
Oh my goodness! It's so amazing to see this toy that I had growing up being restored!
@mrheadbox6951
@mrheadbox6951 Жыл бұрын
the comeback of the master ! Happy to see you do more restoration of quality !
@alphagames4818
@alphagames4818 Жыл бұрын
Here before HD :)
@StrangeMan
@StrangeMan 5 ай бұрын
Great blend of new tech bringing life to older treasures!
@Tobonocom
@Tobonocom 4 ай бұрын
Thank you for bringing cute R2 back to live and for giving him some polish. 🙂
@nohrtillman8734
@nohrtillman8734 Жыл бұрын
Back in the Before Times, when toys and electronics were put together with screws. A fighting chance for a fixer to fix things. Very little in the last 20 yard isn’t permanently glued/melted together in a one-way manufacturing process. Thanks for the video! I thought I was the only one restoring vintage plasticy stuff like this!
@BuckEtheAlien
@BuckEtheAlien Жыл бұрын
This is my favorite restoration you've done. Excellent job once again!
@kevinintheusa8984
@kevinintheusa8984 Жыл бұрын
I bought one of these and it died about a year after I purchased it. It is in a box in my closet, and I just may have to pull it out and see if I can fix it. It actually still looks brand new. Great video.
@Agamemnon2
@Agamemnon2 Жыл бұрын
A beautiful restoration of a vintage piece that would have been the envy of any child in the 70s
@terryingram6755
@terryingram6755 Жыл бұрын
Another fascinating refurbish. Thanks Odd. I always enjoy your video's.
@snowdog1109
@snowdog1109 Жыл бұрын
Absolutely an amazing restoration! Bravo sir! 😃✌️👍🍻🇨🇦
@jasonstadnyk2348
@jasonstadnyk2348 Жыл бұрын
My favorite childhood memory was playing with this guy...
@Yo_DynamoJoe
@Yo_DynamoJoe Жыл бұрын
Best Star Wars content produced this century
@shady5733
@shady5733 Жыл бұрын
Man, I love your videos so much. Keep up the great work!
@Blacktiger54
@Blacktiger54 Жыл бұрын
It's been so long since you've posted a video. I love your content and keep up the great work ❤
@RWNetWraith
@RWNetWraith Жыл бұрын
As I sit here and watch this amazing video, I am glancing up at the top of a book case in my office on which sits one of these droids, in it's original box. I haven't played with it in years, but I'm going to see if it's even still working now. Thanks so much for sharing.
@blueitalia4100
@blueitalia4100 Жыл бұрын
I love this man's skills, I've been watching this channel for years, this is the only considerate KZfaqr.. the only KZfaqr I seen put flash warnings for the people that are prone to SEIZURES. I don't know how he does what he does but this is one of the best restoration channels ever 💯🙏 KEEP UP THE GOOD WORK BROTHER 👍
@abrainlessfish4139
@abrainlessfish4139 Жыл бұрын
I absolutely love these kinds of videos
@rixithyellas0621
@rixithyellas0621 Жыл бұрын
Very interesting restoration! Reminds me of one I watched a while ago with a ‘77 Star Wars X Wing toy. Keep it up : )
@Pante09
@Pante09 Жыл бұрын
Yeah but that X-Wing looked weird afterwards imo. Way too white
@arivaldojunior8515
@arivaldojunior8515 9 ай бұрын
You know....... Im addicted to this channel..... ❤
@GAMECLOSET
@GAMECLOSET Жыл бұрын
I still have mine!!! Sites on my shelf in my studio next to 12” C-3PO. And it still works!
@Chancherpancher
@Chancherpancher Жыл бұрын
Dedicated to Kenny Baker (The Man of R2-D2) (1934-2016)
@OutsideLands77
@OutsideLands77 Жыл бұрын
I had no idea ugnaught hands were so similar to human hands. Practically indistinguishable with those gloves. I have spoken.
@marckyle5895
@marckyle5895 Жыл бұрын
It is the way.
@Mark73
@Mark73 Жыл бұрын
Holy crap! I had one of these when I was a kid. I was kind of disappointed when I found out that it only moved two ways, straight forward and turning backward.
@DiddleEgg5
@DiddleEgg5 Жыл бұрын
Had that R2 as a kid! So fun to watch you work your magic on these old toys and bring them back to life! Great work, as always!
@jayboo1447
@jayboo1447 Жыл бұрын
Happy Mother's Day, Odd Tinkering
@thunderchief7256
@thunderchief7256 Жыл бұрын
But he’s not a mother….
@Lukeno52
@Lukeno52 Жыл бұрын
I'd say it would probably have been worth trying to 3D print replacements for all of the plastic gears, even if they haven't failed now they probably will at some point in the near future - especially the smaller ones. Otherwise, very nice work.
@2degucitas
@2degucitas Жыл бұрын
They are slipping on their spindles. A touch of super glue would do the trick.
@marcuspetford1098
@marcuspetford1098 Жыл бұрын
Not until they break. They looked in good condition, keep it as original as possible if you can.
@disdonut
@disdonut Жыл бұрын
I love the use of classic wipe effects like the ones they had in the original Star Wars for transitions
@Pollux95630
@Pollux95630 4 ай бұрын
So I had this exact toy as a kid. A couple years after I had it, was maybe 1981-02. Middle of the night and that things starts going off in my closet. Lights, sounds, all of it. I yelled and my parents eventually came running in the room and saw it working and went to turn it off…thing had NO batteries in it. It stopped right as my dad picked it up, but we all saw it working by itself. Freaked me out as a kid and still gives me chills.
@44punisherable
@44punisherable 11 ай бұрын
The most underrated and most loved robot in Star wars hands down. Great work on the restoration!
@lewiekong
@lewiekong Жыл бұрын
You should check out Moltow Liquid Chrome or Stuart Semple's "Mirror" paint for chrome effect paints.
@OddTinkering
@OddTinkering Жыл бұрын
Maybe I need to check those out, best one I've tested myself is from Spaz Stix, makes pretty good mirror effect, but it's not very durable and after clear coating even with their own clear coat, it's not that good anymore. Most paints I've seen tested on youtube or even tested have the same issues. The only spray on products I've seen that are really good actually deposit a layer of metal on the surface and those cost a lot. And some of them need special spray guns etc. But electroplating on plastic was something I've been meanignto learn anyways. But good paint alternative would be a lot more practical.
@RobotJeeg
@RobotJeeg Жыл бұрын
Amazing job. Two questions please. 1) Why you spray water before gluing the stickers on the remote controller? Is it water? 2) In the ultrasonic cleaner you put a glass of vinegar inside and water all around the glass? Is it correct? The vinegar is only in the glass, right?
@hemidov.allahverdi
@hemidov.allahverdi Жыл бұрын
Dostum videoların superdi. ❤ Azərbaycandan Salamlar...
@kevingeary2072
@kevingeary2072 Жыл бұрын
Simply awesome! One of the hardest SW toy to find working. Nice to see it can be restored to its off the self state.
@HeisenbergFam
@HeisenbergFam Жыл бұрын
You've casually returned after 2 months to give a shoutout to unknown franchises like Star Wars, respect
@abrainlessfish4139
@abrainlessfish4139 Жыл бұрын
idk man but star wars isnt an unknown franchise to me
@OddTinkering
@OddTinkering Жыл бұрын
Haha, hopefulyl I can make the next video a bit faster, I've also been working on some other stuff so don't worry I didn't spend 2 months only on this. But it was a lot of work because I spent a lot of time learning that electroplating on plastic, I didn't expect it to be quite so complicated compared to my usual electroplating projects.
@Guardian-of-Light137
@Guardian-of-Light137 Жыл бұрын
​@@abrainlessfish4139 You do realize it's a joke right?
@happy_pikmin5540
@happy_pikmin5540 Жыл бұрын
@@Guardian-of-Light137 his username is Abrainlessfish
@Guardian-of-Light137
@Guardian-of-Light137 Жыл бұрын
@@happy_pikmin5540 Yes but usernames don't always mean they actually are. My username is a reference to a self insert charcter in a story I made. Doesn't mean I actually am him. As for them. *shurgs* Who can say? Could just be a funny username to them.
@MrZics
@MrZics Жыл бұрын
Nice to see a new upload but why only 360p??
@hillaryjones143
@hillaryjones143 8 ай бұрын
This makes my heart so happy. May the force be with you!
@AndyjHeath
@AndyjHeath Жыл бұрын
This is such a joy to watch. I would buy this treasure in a heartbeat !
@sergeantoof
@sergeantoof Жыл бұрын
The quality is only 360p?
@YTTV_Mic8
@YTTV_Mic8 Жыл бұрын
Ikr why?
@matt4193
@matt4193 Жыл бұрын
it takes some time to process the other resolutions to be available.
@Zenpookie
@Zenpookie Жыл бұрын
I had no problem with vid quality, sounds like a "you" problem.
@uhartak47
@uhartak47 Жыл бұрын
@@Zenpookie you sound like a dickhead... the problem is not his/ her... the problem is that when uploading a video on youtube, its not just uploading in one video quality.. it uploads on all video quality individually which takes time.. higher the quality, the longer it takes... before telling people they are the problem, understand how shit works first.. The reason you christine didnt have any problem is because you watched this 2 hours after this person posted the comment.. tells you easily that the uploading process was done...
@uhartak47
@uhartak47 Жыл бұрын
The video is now in 4k if you would like to re-watch this terrific restoration
@nataliegray8019
@nataliegray8019 Жыл бұрын
You just know some little kid absolutely adored that toy robot once upon a time.
@NaiyaBladesinger
@NaiyaBladesinger Жыл бұрын
ok 3D printing custom sanding bits for your sander is just AWESOME. that is so cool. I have a few 3D printers (resin and FDM) and I love seeing practical uses for them!
@vincentspratt9478
@vincentspratt9478 Жыл бұрын
I like the braking bad reference that gave me a chuckle
@Madnessnunky
@Madnessnunky Жыл бұрын
The only potential fault would be the lack of oil on the gears. Even though they are plastic, a small amount of oil would help lubricate the axles and prevent future corrosion. It looks fantastic though! The circuitry involved in making it drive in the direction of the head is a fascinating thought process. It's likely old electro-mechanical contacts and such given its age! Having a closeup of how that system works would be super cool.😁
@marcuspetford1098
@marcuspetford1098 Жыл бұрын
Not oil, but plastic safe lubricant. More like a grease.
@sitto20021
@sitto20021 5 ай бұрын
Absolutely amazing. This is the way to repare ancient toys. Congratulations and thanks for the video
@anthonypreston8355
@anthonypreston8355 Жыл бұрын
As a star wars fan I was extremely satisfied with this restoration, and k ow really really want one of these. I’ll have to check online for one
@talonfarmer5547
@talonfarmer5547 Жыл бұрын
Love that part at the end, he's off on his own adventures now
@robertsmith2491
@robertsmith2491 Жыл бұрын
Brings back memories of late 70s being a kid. Thank you.
@jonyak1221
@jonyak1221 Жыл бұрын
I had gotten one of these for xmas when i was little, lost it in a house fire. Great restoration
@maplejames6992
@maplejames6992 Жыл бұрын
Wow, I never knew this was around, very cool :) Fist bumps from Canada
@NotMoreGames
@NotMoreGames Жыл бұрын
I’m so glad you saved the little fella. Excellent job as always. 😊
@darthprime4916
@darthprime4916 Жыл бұрын
Everything you do is so far out of my realm and understanding, but I thoroughly enjoy it all!! The force was with you on this.
@atomikku4227
@atomikku4227 Жыл бұрын
It’s always a good day to see the Ducktor
@cunnyfunt30
@cunnyfunt30 8 ай бұрын
It was better than brand new by the end, another glorious restoration
@GothGuy885
@GothGuy885 Жыл бұрын
wow this R2D2 brings back some memories of my childhood of the 70's 😀
@johneygd
@johneygd Жыл бұрын
WooooW that starwars robot was really ahead of it’s time.
@luis.esquivia
@luis.esquivia Жыл бұрын
Excellent video! Thank you for sharing. I had one of these back in the day and really appreciate your care and attention to detail in restoring this R2 unit. Bravo! Thank you!
@johnbradford9235
@johnbradford9235 Жыл бұрын
That was really special dude. Thank you. Even though it's totally out of date now by the standards of today's electronic toys, it still is and will always be wonderful, because of the connection to that time. Great job saving it and look after him 😊. 😎
@Thelongmanable
@Thelongmanable 3 ай бұрын
*_Toys like that never got the appreciation for its clever engineering and pcb designs.._*
Junk PSP Restoration  - Sony  Playstation Portable 1000
23:44
Odd Tinkering
Рет қаралды 7 МЛН
1978 Star Wars X-Wing Restoration - Luke Skywalker
13:50
Rescue & Restore
Рет қаралды 2,6 МЛН
1🥺🎉 #thankyou
00:29
はじめしゃちょー(hajime)
Рет қаралды 80 МЛН
Pray For Palestine 😢🇵🇸|
00:23
Ak Ultra
Рет қаралды 36 МЛН
1960s Masudaya GEMINI X-5 Space Ship Restoration
22:46
Old Things Never Die
Рет қаралды 611 М.
1978 Millennium Falcon Restoration - Water Damage Restoration
16:33
Rescue & Restore
Рет қаралды 5 МЛН
Old Axe Restoration and Customization
19:30
Odd Tinkering
Рет қаралды 132 М.
How Old Pinball Machines Are Professionally Restored | Restoration
25:10
Masters Of Craft
Рет қаралды 274 М.
Very Damaged Tonka Volkswagen Beetle Bug Restoration
34:55
AR Restoration
Рет қаралды 2 МЛН
1950's Big Beam Flashlight Restoration
29:36
Odd Tinkering
Рет қаралды 1,7 МЛН
1🥺🎉 #thankyou
00:29
はじめしゃちょー(hajime)
Рет қаралды 80 МЛН