The suspension of disbelief is so real with these channels

Qe tontería pensar así solo disfruta no denigres

that even caking of "rust" all over everything had to be quite a challenge (to create)

and its crazy with all the rust pitting on the outside that inside of the gun while nasty them parts cleaned up with zero pitting like it was packed in a grease on the inside.... almost like it was just covered in clay and left to rust for awhile not found dug up in a river bed.

this is absolutely staged

and why has part of the handle been digitally pixelated at 2:15

Looks like it was battered and fried. Lol

😂😂😂😂

No seas ridículo eso lo harías tu y por eso piensas asi

Solo disfruta y deja el drama

They are made of rust proof materials

The whole thing is a scam

Это просто контент , искусственно состариные вещи

Yes, they replaced the springs

​@@tonykourounblis1854Your birth was a scam

My guess is it slept with the fishes, along with the bodies of the souls it took 😅

​@@unnamed715😂😂😂

This idiot destroys them all himself. You think he just happens to find a bunch of rusted guns?

@@zeekwolfe6251 What do you mean?

They are drowning them in acid that causes intense rusting very fast and burying them. All these youtubers are doing it for easy restoration videos.

Not every gun can be like the Sten Gun with a total of 47 parts, only 4 of which that really moved.

I once repaired the trigger assembly on a revolver & let me tell you it was a bit of a mofo job, it was like I needed 3 hands all at once to complete the task ! 😂

​

I'm nervous for this guy on the reassembly 😮 SO many parts!

if you think about it, it's simple, the center is the hammer: raising it, you rotate the cylinder, you block it by training the chamber and barrel, and you move the trigger back into the firing position. in double action you move the opposite, the trigger raises the hammer, which does as described before. the only thing apart is the L-shaped bar which prevents the firing pin from reaching the trigger in the event of an accident. a very ingenious system of levers and pins

The stuff can be used for other things....like a flat head screwdriver is meant for screws but can be used as a chisel

FAR more accidents occur with a semi automatic weapon than with a single action revolver !.

Double action

@@ThurgoodJenkinz I stand corrected,,yes, double action 👍🏼

What they usually mean when they say fewer moving parts is fewer EXPOSED moving parts. In my experience, people who say that are usually not experienced gunsmiths, but experienced shooters, so they don't know as much about what's in a handgun as they do about what's on it. DA revolvers usually have a trigger, a cylinder, a latch button, a hammer, and an ejector rod: about 5 parts that, if messed with or not navigated properly, can make the gun experience failure. A typical 1911 has a trigger, a slide, a thumb safety, a grip safety, a hammer, a removable magazine, a slide release/lock and a moving barrel, which is on a swinging link and exposes itself when fired in order for the gun to eject a casing and feed a new round. The 1911 was the US standard for semi autos until the 80s, so when people are referring to semi autos as having a lot of moving parts, they're likely referring to that platform of handgun. In an emergency, safeties can sometimes trip up startled shooters, and whether or not the slide has been racked ahead of time or the round was chambered properly also caused people some issues that the revolver circumnavigated with its external simplicity. Nowadays, there are semi autos with no exposed hammers or thumb/grip safeties, as well as more reliable feeding and extraction systems, which even 1911 platforms benefit from. There are more differences internally, of course, but that's beside the point. Both are uniquely reliable platforms now, and everything depends on what your intended use is. While things not being exposed make them less likely to be subjected to the elements or mishandling, it also means that, if something does interfere with them, you have to take the gun apart to fix it. Most revolvers need at least a screw driver to get at faulty parts. Most semi autos don't need a tool at all to get to what is likely to fail. It's also important to remember that more parts = more complicated = more likely to fail is a complete fallacy that is not universally true from an engineering standpoint. Yes, you shouldn't make things unnecessarily complicated, but a well designed machine, if it has more parts, likely utilizes those parts for a more effective and reliable result. In a computer, they often have cooling fan/vent systems that prevent the computer from breaking via overheating. The computer literally wouldn't be able to function very long without it, yet it consists of additional parts. Same with guns, Smith and Wesson used to have the firing pin that ignited the primers as part of the hammer itself. This actually led to a severe number of failures, according to S&W armorers, who would constantly repair these guns. They redesigned the firing pin separately from the hammer, now housed inside the frame of the gun, and now they no longer have near as many hammer/pin involved failures they have to correct, despite using more parts in the design.

I was mesmerised from start to finish...

Well said. Obviously just covered it in some sort of concrete or something. How come those tiny springs survived without any corrosion and the threads and pins were all usable?

Personally, I like when my wood grips develops layers of "rust"

@@jimjam4082 oh yes, one of life’s greatest mysteries is rusty wood. I’ve heard of ironwood but I don’t think that rusts anyway 🤣

@@nomis3045 they are made from Rust proof materials.

I agree I claim bs

that was the first thing I was thinking of too....he found someone's hidden evidence

it is a Smith and Wesson. T he insides are modular so there are not very many parts. A Ruger has even less.

ok

Maybe behind the scenes Marty had Doc use his Deloreons Tri-Flux Capacitor to remove that unique “wood rust”!

Might be ironwood lolol

Not rust

I think it's more amazing that you dont know what rust looks like😂😂😂

Nah, it's artificially reliced

I had no idea that there were so many parts to 38.

Amen, I winced as well. Too much prying also, there are better ways.

You didn't notice he was using a metal hammer to at first trying to open the cylinder, then all of a sudden we see the plastic end being used? Did you also notice that every screw was removed with no problem?

@@davidbrewster5904 clever editing

First, he is the one who ruined it in the first place. He removed every screw without problem, and it's coated in a layer of some shit he likely left it in for a month or three. Second, he's a hack. These aren't proper gunsmith tools.

​@@ShotgunDart Guy is using a blacksmith's hammer and plastic Dixie cups lol.

Best for personal protection. Very dependable

Yeah, I didn’t think it was capable of actually firing..glad everything worked

Did you actually see THAT gun fire? I didn't! I saw him throw some (ONE) round into a chamber. Then he claimed the camera "overheated". I was born at night, but it wasn't last night!

You might want to see a couple other posts before raving.

Must have been ironwood.

Пружины из более качественной легированой стали.

Gullible much?

Rust spreads you know… rust can be on almost any, along with mold and other things.

buena que hiciste esa pistola está cálida

Right!! No half-smart person would even attempt to fire a round through that gun!

@@JoseVeliz-st7zzhi y hi hello Ruth, sure to authorise will be taken care of your own

​@davidbrewster5904 I sure Wouldn't

I see this also.

@@burthoppy I like restoration videos because I love doing restoration. It gives me ideas to my projects. But when people stage it just to get views ....its sad.

No pitting? Ur joking right… did you even watch the whole video???

@@austin7530 yes I did . I can create the same effect by spraying caustic liquid upon it. But with the severity of corrosion on the outer while the small intricate nomenclature like the springs were unaffected would allow a reasonable suspicion of a staged event. No doubt the motive would be to trigger views to a platform that gives financial benefits for such views. And yet it's just my opinion.

@@Mountain_Paladin the screws are opened easily.

Makes me wonder why it was in the river 😂

​@@geneb5482you know exactly why lol

Wrong. They hard chrome plated a ton of hammers and triggers.

Thrown in lagoon after murderous person murder people with it.

@@gmac8852 nah, this guy 100% rusts everything himself.

That’s clearly not rust

saw a comment saying they destroy them on purpose for content, so idk man, that thought is always in the back of my mind now that I watch these videos

It was used for murder and dumped in lagoon but was found by restoration man to be restored and used again. Endless cycle of murder machines.

Fraudulent 😠

A baseball bat is a murder machine if you want it to be. Anything can be, even your hands. @@gmac8852

Never seen a hand restoration, wonder how it’s done

Someone's got a hand fetish

Onlyhands

@@largeboseheadphone6494 wow

Concrete mixed with mustard? I think this is cluck bait. He took a working gun, messed it up, then cleaned it.

maybe harden filler,,,, milliput i use "two part filler" can be drilled tapped when cured ,,,, Edwin J

🙄

yea its pretty obvious, wood doesnt rust, rust isnt yellow like that, if it was tossed in a river it would look way diffrent

Yeah and he's damaged the barrel on purpose too

When he unscrewed the grips you could see shiny threads.

Eu percebi isso mesmo. O material usado pra ficar parecendo ferrugem, parece rejunte de azulejos. Nesse estado os parafusos não soltariam facilmente como pareceu