This Original PlayStation was sent to me to be restored and repaired by a subscriber who didn't have any use for it.
I will restore this broken and yellowed PlayStation. The console doesn't read discs, which is a very common and easily fixable issue with these old consoles.
First, I remove 6 security screws from the base to allow me to separate the two halves then once inside I can start to take it apart properly, first, I removed the power switch then the cartridge ejection lever I then removed all the screws from the motherboard and removed it from the lower casing.
During the disassembly, I found the remains of a spider and a spider nest. It's very common I find bugs inside these old devices, I'm, not sure why, maybe they're dark and warm places?
The capacitor was swollen, in all cases, swelling is due to the buildup of internal gases as part of progressing failure mechanisms. A failing electrolytic capacitor typically generates hydrogen gas as the electrolyte solution begins breaking down. This causes a build-up of internal gas pressure which swells the case.
To fix the disc drive I only had to clean the lens. In some cases, the laser has gone old. You can try adjusting the screw I show to give it more life. It increases the voltage going to the laser and if it's adjusted to the highest voltage at the factory the laser would burn out faster.
I then washed the plastics in soapy water to remove all grime and grease in preparation for the next step which was to soak them in Cream Peroxide Developer 40 Volume and UV light for several days to remove the years of yellowing that has taken place, this process is also known as retr0brite.
Restoration & Repair of broken Xbox 360 and Fix the Red Ring of Death
• Restoration & Repair o...
How to remove yellowing from old plastic (retro bright) the BEST method
• Restoration & Repair o...
How to fix cracked plastic
• Restoration & Repair o...
I will show you how to remove the yellowing from vintage plastics with the Retr0bright method.
This video will show you how to make your yellowed SNES look almost new again.
Coat the plastic in hydrogen peroxide to fix discoloration. Hydrogen peroxide works well on plastics that have turned entirely yellow instead of in just one spot. Fill a plastic bag with enough hydrogen peroxide to cover the plastic. Stick the plastic in the bag of hydrogen peroxide and lay it out in direct sunlight. Wait 3-4 hours before rinsing it off with clean water.
You can purchase hydrogen peroxide at a drugstore or big box store.
If you’re treating some sort of plastic mechanism, make sure you remove all the parts that aren’t plastic before putting them into the hydrogen peroxide.
You can also use an old toothbrush to scrub the hydrogen peroxide onto the plastic if desired
Thank you for watching my video!
ASMR relaxation restoration
electrolytic capacitors
The failure of electrolytic capacitors can be hazardous, resulting in an explosion or fire. Bipolar electrolytic capacitors which may be operated with either polarity are also made, using special constructions with two anodes connected in series.
(Retrobrighting)To return the yellow color of the plastic to its true white color
Thanks for watching, I hopy you enjoyed the video!
---------------------------------------------------------------------
SUBSCRIBE ▶▶▶ / restorationeg
---------------------------------------------------------------------
ASMR relaxation restoration
----------------------------------------------
Some of my tools:
----------------------------------------------
Screwdriver:
amzn.to/3hPBOiC
Isopropyl Alcohol 99.9% Electronics Cleaner:
amzn.to/2XvnTHl
Hot Air Gun Kit:
amzn.to/3lJ2SkG
My main camera:
amzn.to/2XHl6er
UV LED Strip Lights
amzn.to/3kXhSMU
Black gloves:
amzn.to/3zo0ZyQ
----------------------------------------------
#gaming
#Playstation2
#resurfacing
#asmrrelaxing
#restoration
#repair
#playstation
#asmr
#tech
asmr no talking