Haha yes it needs to go!!!

Thank you sir, that was the only thing getting my attention.

OCD kicking in..., 😵😖 Change it!

It was driving me crazy the whole video, couldn't shop looking at it the whole time. It came already like that or that was the one you bought from the Retroid store and you did an unlucky instalation?

I was unlucky during installation. If anyone is wondering it still looks like this. If I ever purchase another Retroid device I will grab another. Unless you can get on Amazon?

Thanks! Not the sort of video I have made so far but loving this devicw

This is something I didn’t cover but a great point now that the RP3+ has a wide screen. You can easily install any Android media apps. I know most people have phones nowadays. But a nice festure

Could not agree with you more here

Agree, input lag can literally break these 16-bit games and given the accuracy of the emulators is improving and we have shaders etc. a lot of lower end devices don’t feel the same

Thanks so much. Glad you like it. Have a little mini follow up based on some of the comments coming next week actually

Amazing! Hope you enjoy it as much as I am so far

@@thegamelounge659 No card with my unit. No roms ???????

I think mine came with 128gb internal memory only. ROMs wise I always delete what’s on these units as like to use own collection.

We are in a golden age my friend ps2 and Xbox emulations are 80% there on android handhelds once that’s done there is nowhere to go after that

Thanks for this comment! This is exactly why I made the video. I too have had all sorts of devices. With the one I personally played the most being the original GPD XD but none have made the cut. This I haven’t stopped playing!

Thanks, I hope you enjoy it. I still use mine all the time!

Ahh great, I will watch. I can see the result of this video being I need to buy a 400GB microSD card if more GC games work

No. GameCube games that work well are not that many

@@thegamelounge659there’s a compatibility game list on retroid’s subreddit page

Amazing! I can confirm it runs it perfectly!

Any time!

What version of Lego harry potter are you playing? Is it for wii?

@@trevorcollins9238 yeah Wii version. Runs great

Yes I think that’s standard. I love the form factor of this thing though. Like a mobile phone and get the job done up to Dreamcast level. For the price it’s stunning

@@thegamelounge659 yeah I would like to see more powerful devices at this size

This is really interesting Metroid Prime performance was not quite there. I think the lag could be caused by a cheap cable. Need to try it out again not connected through a capture card to see. Saturn is amazing! Played it so much

@@thegamelounge659 Use MMJR off the official webpage rather than "dolphin for handhelds" or anything that the handheld comes with. That version has settings you can toggle in-game including CPU throttling and overclocking. The dolphin emus the device come with are awful.

One question, I installed Dolphin MMJR and it seems ok. But I can’t seem to map my controller? It only shows the on screen touch controls. Assume I am missing something obvious.

@@thegamelounge659 The three dot menu on the top right and go to "Gamecube input" - also under Graphics Settings > Video backend > switch to VULCAN. Don't use OPENGL. Also make sure its Dolphin |MMJR| v1.0-11505 released by "Gamer64ytb" - I think there's another version floating out there that's just the googleplay version.

@@thegamelounge659 Look up the youtube user "RoeTaKa" - he has videos where he goes over the settings. The video is called "Retroid Pocket 3+ Gamecube Showcase & Settings - Dolphin MMJR and MMJR2"

So a bit of shameless self promotion here. After all the comments on this thread I decided to test out a load of GC games… GAMECUBE on the Retroid Pocket 3+… Was I too quick to write this off? kzfaq.info/get/bejne/Y6p0nLSD0qzMg58.html

I am still playing it so much. Actually been playing it a load for the DS, which I don’t even touch on in my video

I have had no issues so far. Then again I haven’t run Gamecube games for longer than an hour or so

Standalone, it’s significantly better than the Retroarch core. Best used with a launcher though.

@@thegamelounge659 Im kinda new to this and just got my retroid pocket 3+. Can you tell me why it’s better to use it with a launcher? Does it help with performance?

No it doesn’t change the performance. There are 2 versions of Yaba Sanshiro, paid and free. The free version I find the interface to be a mess. So it’s best to configure all the options but they launch the games from a launcher. I personally use daijisho

Thanks, this video has created so much discussion which was the whole point in making it. So every sun helps. Personally I would get this. Vita’s are getting harder to find but they are fantastic devices.. there isn’t much in it!

@@thegamelounge659 Ok, I will go with the Pocket 3+ instead, Thank you!

It does but like you say cost seems to keep rising.with shipping and taxes especially. (If outside the US of course)

So I don’t own the Flip, however, internally it is the same as the RP3+. So it comes down to personal preference with the clam shell design. For me, the biggest differentiator is the analog sticks. With the Flip not having proper sticks it’s makes certain PSX, DC, PS2, GC, etc. then it isn’t the best.

Yes someone else commented on this. Obviously I can’t comment about how you source your game but the OS you use makes no difference. You can just load up the SD card with your games…

@@thegamelounge659 awesome thanks

Yes, the backend is Retroarch and the system is powerful enough to add most shaders. So you can get the look you like

Yes the Dolphin MMJR branch seems to have come a long way since the RP2+ launched. It’s making me think I should take a more in depth look at the Gamecube in the next week

@@thegamelounge659 yes that would be good. There are a number of options. I always use pal version if possible. No upscaling. I use the mmjr2 for handhelds. Little querk is sometimes I need to go into settings apps mmjr2 app. Then storage and clear it's cache to work fine.

But that may just be useful for the rp2+

Working in 1.5x resolution: Animal Crossing Beyond Good and Evil Bloody Roar Primal Fury Chibi Robo Fire Emblem - Path of Radiance Legend of Zelda - Twilight Princess Mario Power Tennis P.N 03 Paper Mario: Thousand Year Door Pikmin Resident Evil 4 Super Mario Sunshine Virtua Striker 3 Wario World

@Jobe Aresto just wondering how you were able to overclock the RP2+? i also have one, and was just curious.

The RP3/RP3+ have digital triggers. So you are right remapping is not an option. With the few PS2 games that both work and utilise this. You are going to lose part of the experience from that side. But if it is PS2/GC emulation you are looking for this is not the device. That being said I played a lot of Dreamcast racing games (the Dreamcast had analogue triggers) and the experience was great. Also played Forza Horizon 5 through game streaming and it was more than playable. I guess it comes down to your tolerance levels for this. Personally it wasn’t a major issue for me. Even though they are digital they feel great.

You just named the only games that use that gimmick, and it's not needed. As a kid on a real ps2 my controllers were 3rd party so i beat mgs3 without that feature anyway.

I’m experiencing this issue with the NBA 2k series of games. I have to make sure I cover enough points to make up for not being able to shoot free throws.

@@mickeymickey9914 There are more than what he listed that use the gimmick. The Bouncer, for example, requires soft/hard presses to pull of certain combos. The game is actually pretty rough without it. None-the-less you are right in that most games that utilize it are barely missing anything without it.

@@reece758 lol who still plays that garbage. You gonna emulate madden and fifa 05 too?

Yes I’m not a massive fighting fan. But the few 2D fighters I have tried I have to admit I have found some moves tough to pull off

Ahh that’s a shame. I actually tried my rip of SF3 (the PAL version) and it didn’t boot. Did Google it and some have said that different dumps do work. Everything else has been great for me so far

@@thegamelounge659 I found a program that takes my disks and converts them to CHD files. I now have all 3 Shinning Force games working. Marvel vs Street Fighter is still a no go. That one also gives me trouble on a Satinator. Which is a bummer as it's my fav Saturn game.

So the RP3+ has just dropped to $135 because the RP4 is coming. Personally I’d all my handhelds the RP3+ is the one I played the most this year. It’s a perfect PSP machine. The RP4 and RP4 Pro will be $150 and $200, the base model will feature a faster processor than the 3 as well as Hall sensor sticks, and analogue triggers. So Dreamcast, PS2 and GameCube will be a much better experience but it won’t do all GC/PS2 perfectly (maybe 70% of the games). The RP4 will have a significantly better processor and more RAM so in terms of future proofing it’s the one I would get but right at the top end of your budget. Either way months after posting this video I still love the device and PS2 has many game that really work well. I have played a ton of Silent Hill 2 on it recently.

Interesting, I’m using a 256GB card. I did plan one day to use a 512gb. So this is good to know

Hey Brinta, yes, to be honest the whole setup was very DIY to get the footage. Need a decent teipod

It’s a snip from a track from MSR on the Dreamcast

@@thegamelounge659 Thank you so much

Got to say I tried Dolphin MMJR with TechDweeb’s recommended settings as someone suggested and GameCube is a lot closer. Many games are close

The speed these things come out it probably wouldn’t be a long wait

@@thegamelounge659 that's what I'm counting on. Maybe 6 months or less 😂

Of course they’ll fudge something up with the 4 and then you will want to wait for the 4+. And then the 5 will be even better. Maybe you should wait for the Retroid Pocket 9 Pro Plus with 7G and holographic projection.

These devices are like phones. If you wanna wait for a better version than what's out right now, you may spend forever waiting. I'd say if it plays what you want, nab it, and then consider upgrading when something worth jumping to arrives.

Sadly no, it doesn’t come with any games. You have to load and configure the games yourself

Do you have an email address I could email you at with some questions? Thanks

Feel free to DM me on Twitter @TheGameLounge5

Sorry. Don't use Twitter. Wondering if I could purchase this device with the games set up? Thanks

@@larrymarshall1681 Your questions indicate you don't quite understand the copyright/legal issues with that. As you were told already, it doesn't come with the games.

Yeah I am honestly tempted to pick up another. GC works, don’t get me wrong I’m not saying it’s awful. Just saying I wouldn’t buy one of these for GC and PS2, it’s a nice bonus. But 3 of my favourite GC games just didn’t work. F-Zero, Twilight Princess and Resident Evil 4. I haven’t played around with the settings tjough

@The Game Lounge Agreed not the best if those are your target systems. I have other devices and got this for 32bit on down. Was surprised that the T618 does as well as is does.

i think his take on it is more correct. while ps2/gc games are able to run on it, i definitely wouldn't recommend this for anyone specifically trying to run those systems. many games struggle, and the ones that do run usually take some tweaking. even my pixel 3 with a snapdragon 845 has trouble running the demanding ones. for the rp3+, i still consider ps2/gc emulation as an extra perk, since it can play many of the easier games well.

Just NO. PS2 and GameCube are not meant and do not run well on this system. There are too many that don't work at an acceptable level. This fashion of saying percentages (70% 80% or 30%) is pure ignorance.

@locked01 More ignorant to make that reply. Have you tested? I have and the percentage holds. Math and testing are hard.

we shouldn't be too far off since the windows/linux handhelds are now reaching lower prices too. i'm thinking my rp3+ will be my last android handheld since the new handhelds by ayn and aya are looking really good. but yeah, $200 for flawless ps2/gc emulation is kinda the sweet spot

I mean the rp3+ definitely plays a good majority of gc and a lot of Wii. There’s a compatibility sheet linked on the Retroid subreddit

@@justinfoster1040 Yeah but it needs some tinkering by lowering the native quality of some games. By the end of 2023 I think they will come with an arm SOC capable to run those systems at native resolutions at least.

@@SergipeCycling In pretty much everything I play I'm running at least 1x native resolution and many things 1.5 to 2x

​@@SergipeCycling wrong. The rp3+ is playing most gamecube at 1.5x. Look the sheet up

100%, arguably even more since this video. I discovered GameCube and PS2 can be made very playable (See my follow up GC video, bit of shameless promotion there). They also released an update that increased performance and fixed some minor issues. So this is probably my most played system still!!

@@thegamelounge659 Amen to that because my RP3+ Metal and 16bit RP Flip variant are winging there way to my home as I type. My last Retroid product was a RP2 so I'm looking forward to the performance bump lad.

Awesome, let me know your thoughts when you get it

Awesome, what do you think of the device overall though. Can you get past the issues you have and enjoy the additional powers over the MM+. Or is it a deal breaker for you?

Agree here although I don’t find it a massive issue. 259 USD however is pushing it. You can get a switch for that. Then again I am currently playing this more than my Switch…

@@thegamelounge659 yeah, I play my RG353P more than my switch too. Maybe the button layout is an issue for me is because the way I am used to play my games. Everyone is different and I am happy for the choices we have now. I play alot of games I never finished when I was a child and I am so happy that my father gave me his game collection from Amiga, DOS, PS1, SNES etc. It is so nice to have a device like this to relive parts of your childhood.

Thank you, yes I am totally with you. I 100% agree which is why I have been looking for a handheld for some time which can handle some of the post-processing. To me this one absolutely does it

Great stuff, hope you enjoy

@thegamelounge659 I went with retro, not clear purple and I think I'm okay with it lolll

Yeah, I’m actually a little bored of the Purple now. Tempted to pick up a black one.

mine didn't either, i think he meant charging cable.

No mine just came with a USB-C charger, not the actual plug

Interesting, MvsSF for me was a little slow. Got ~50fps. Castlevania ran perfectly for me so not sure what issue is. Are you running latest Yaba Sanshiro?

@@thegamelounge659 thank you for the reply. Yeah mine is all up to date. Sotn has audio issues and sometimes frame rate drops for me for some reason. May I ask how do you have your settings as in yabasanshiro pro?

This is good to know. I'm getting a device like this to play Dreamcast and prior. If there are games that won't run well, then I'm not really interested in getting one.

Metropolis Street Racer for SEGA Dreamcast! One of the best games on the system

Hey, no not Ioannis. Sounds like a great guy though 😉

So actually yes, far more play than I thought. GTA, Silent Hill 2, Outrun and many more worked great for me.

I’m going to need to try and tweak things this side. PS2 is generally harder to emulate so when things were crawling for me I just assumed it wasn’t worth the effort. Maybe I need to try harder 😂

I agree. For example I could not get Beyond Good & Evil running well enough on Gamecube, but was able to get it to a playable state on PS2. Changing the "Hardware Download Mode" setting alone is like a magic switch on some games.

​@@MrMo0nlight That's seriously the only example i know where the ps2 version runs better. It's usually the opposite, you just need to configure your default dolphin settings so that they cover 90% of games. Look up the spread sheet.

It’s actually a badly installed screen protector. Need to rip off and get another

The main ones is the fact this is the first affordable portable Saturn. There are a few things I go through in the video

Yes I have since tested a lot more games and many work great. Games like MGS2, Virtua Fighter 4, Ratchet & Clank, Need For Speed: Underground all sadly didn’t for me when I tried it. I made a video about the GC and was I too hasty. Perhaps I should do the same for PS2

Only problem I have is Android doesn't have a single decent frontend like Linux devices do with Emulation Station.

Interesting that you prefer the Anbernjc. They make fantastic devices with great build quality but I always feel they are underpowered. I may pick up their next device.

@@thegamelounge659 if they could make a device that has the value of the RP3+ with the emulation frontend that Anbernic devices use then it would be the perfect device for me.

@@thegamelounge659 really depends on what games you want to play. I don’t love the early generations of 3D (except Dreamcast). The nicer controls, UI, and build quality are things I wouldn’t want to give up.

@@Flyingboots1 RG 505 has the same SOC from the RP3+ at the same price range.

I don’t really mind the Genesis. The 3 buttons map quite nicely. It’s the Saturn that I find frustrating mapping the X,Y,Z

So you make an interesting point about the long run. Time will tell but I can see why people are nervous. For now I’m still playing it more than I play my Switch.

See I love the size. Fits nicely in a pocket without being too intrusive & cheap enough that if it gets beaten up it isn’t a disaster

@@thegamelounge659 If the screen was like 2" bigger it would be perfect. It might fit in my pocket but its too small for my hands. Cheaper* $150 is not cheap