Martin i forgot this thing that u said is flash under the headlights and i had wash it if water went on it can i change it and it will be ok!!!!!!!PLEASE ANSWER!!!!!!!!!!!!I APRICIATE YOUR WORK AND YOUR PASSION ABOUT FIXING SCOOTERS‼️‼️‼️‼️‼️‼️‼️

Hi Martin. Iam really happy when find your video here! I step by step walk approx 95% same shoe like you! I buy a TGB R125X 3months before! I find this TGB One of my friends backyard. (The scooter stay 4 years at same place before I buy it) I drill out the main stand rotted bolts, etc, etc. Now the restored scooter is working well, never have any problem (coz the engine block, is 1 of the best!) The parts is cheap 2... Iam happy when see, not just I have difficult restoration :) !!!!!!!!!!!!!!!

Martin, don't know if I told you this before, but I love your music intro to your videos. =)

i paid 30 quid 3 years ago for a honda scooter. the piston was foobared. so bought a second hand engine for 90 quid. dropped that in and was well into getting the scooter back on the road. then the mrs had a go in the garden and crashed it in to a fence smashing all the fareing and lights lol. its still out there now, this vid makes me think shall i drain it and clean it all to try and kick start it up and running again. nice vid martin.

on my tgb r50x i am restoring i have t black wires i dont know if they both go to the battery or if one is a ground to frame

A couple of things to look out for, from my own experience with my sons chinese scooter are 1. The side stand switch, which if dirty or corroded can stop the bike from starting but this usually cuts power to the electric start worth a look though. 2. The automatic choke can stick - if you remove it and connect the wires across a battery you should see it move. When the bike is stopped the choke is automatically switched on, then after starting, current through the choke slowly closes it.

The two wires are for the 12v socket in the trunk

Hi mate do u know if it's possible to change kilometres to mph ??

Hi Martin, I recently bought a Tgb R50X and its doing what you say in the video it was reeving really high like up to 12,000 then just cut out and now it starts if I leave it for a hour or too then it stays on for 30 seconds then goes off agine please help me,Thanks Martin, Harrison p.s love the Beatles Poster !!😜

Will I be better off with a 2 stroke or 4 stroke keep in mind I'm not a stick im quite chubby

Power source is the cigarette lighter under the seat for phone charging i think

Hey buddy. Does this have a non serviceable carburetor? Have one that leaks a lot on startup. Stuck float?

4:30 what’s the connector with the yellow wire on the far left of the screen for? An alarm possibly??

that looks like my standard of electrics :) good work on the bike so far fella although rather you than me

The resistor block is a security feature for the key , so it won’t start without proper resistance

Little white part is resistor, he works when you turn your lights off

Dose this bike have a side stand switch and a kill switch from factory as I have recently but one as a none runner and I have no spark at all fitted every part that controls spark all new and still nothing

Some of these mopeds were fitted with a remote start facility (which were a right pain in the proverbial) - could that be the 2 unattached wires under the headlight panel?

Man , Someone did a hack job on that poor thing ! I bet you get if sorted out Martin .. Looking better though !!

Where can I find the diagram for it? I cannot find it anywhere and for me, the dash display always stays on for the 2006.

I'd guess that power source is something ignition related like a coil or something

Do you have a download for the wiring diagram for me?

It's the worst thing fixing other peoples bodges.

Cigarette control in the box. Power source.

Could you possibly send me a photo of the wiring diagram you have? Ive been trying to put together my tgb r50x scooter for years with no hope. I can send you my email