REUPHOLSTER SOME SLING CHAIRS WITH PHIFERTEX

No video

REUPHOLSTER SOME SLING CHAIRS WITH PHIFERTEX

Рет қаралды 772

4 ай бұрын

Today we reupholster some Sling Chairs with Phifertex for Uncle Bobby
Paid Associate Links:
Some tools and products used on this project
Surface Conditioning Disc: amzn.to/3USlJuY
Strip Disc 4½": amzn.to/2OzBaHy
Black Hawk 36 Grit Grinding Disc: amzn.to/3XgjTVn
Walter Grinding Disc: amzn.to/3TTTEkO
LED Light pack: amzn.to/364VL2p
Markal Silver Streak Pen: amzn.to/3IIYZq5
Center Punch: amzn.to/3tCLx10
E6000 Glue: amzn.to/3riTI2v
Barge Contact Cement: amzn.to/3ojLODZ
Fisher Space Pen: amzn.to/3r9bFAk
Welding Blanket: amzn.to/3nqY84M
Silicone Paste: amzn.to/3rbLMyC
Surface Conditioning Discs (scrubby pads) amzn.to/3EAvhkL
3M Black Strip Calk: amzn.to/3ERm60p
3M Ribbon Sealer: amzn.to/3kIKvgq
Black Posca Paint Pen: amzn.to/38FsjP8
White Posca Paint Pen: amzn.to/3pAuud9
Alien Tape: amzn.to/35bRmr5
Dyna-Glass Qt: amzn.to/33KDMJr
Dyna-Glass Gal: amzn.to/32Grrq6
Mayhew 37315 Shake n Brake tool: amzn.to/39ff6d1
Chicago Pneumatic Pencil Grinder: amzn.to/377fnxM
Sheet Metal Gauge: amzn.to/2P1Nihy
Sharpie Magnum: amzn.to/2SaEp7u
Carbide Dremel Bits: amzn.to/2QG3K8F
Anti-seize: amzn.to/2OgYta6
www.amazon.com...

Пікірлер: 55

@ScoutCrafter 4 ай бұрын

What a sweet design- repairable without any unnecessary disassembly. Awesome job!! 😃👍

@805ROADKING 4 ай бұрын

Thank you Mate!!☻

@mattthescrapwhisperer 4 ай бұрын

Most people these days would have just chucked the chair in the dumpster. Your brother-in-law knew you could rescue it and you kept it out of the land fill! Nice work R.K.!

@805ROADKING 4 ай бұрын

Thanks Matt!! It's funny, almost everyone I know with these type of chairs picked them outta the Gabbige!!☻

@nashguy207 4 ай бұрын

I'M sure uncle Bobby was thrilled with chair. You never cease to amaze me. Is there anything you can't do. I always love watching you work no matter what it is your doing!

@805ROADKING 4 ай бұрын

Thank you Bob!!☻

@dwaynejohnson6277 4 ай бұрын

You're on a roll, reupholstering everything now!!!

@805ROADKING 4 ай бұрын

Yeah, we have time to do it now that the old truck is finished!!☻

@chrishartley1210 4 ай бұрын

That finishing touch at the end was just perfect. Oh, and don't worry about the wind noise, at our age a little wind noise is inevitable 😅

@805ROADKING 4 ай бұрын

Thanks Chris!!☻

@markgeorge3960 4 ай бұрын

Very nice! I have seen others attempt that, but yours are the only ones that look factory! Thanks for the video!

@805ROADKING 4 ай бұрын

Thanks alot Mark!!☻

@Eagle48 4 ай бұрын

Outstanding work, RoadKing. Thanks to your skillful repair, Uncle Bobby will be able to fart into those chairs for years to come!

@805ROADKING 4 ай бұрын

Thanks Roy!! I'm fine with that, as long as he don't Shart in them!!☻

@donaldhalls2189 4 ай бұрын

Excellent job, that machine is very useful, thanks for sharing, all the best to you and your loved ones

@805ROADKING 4 ай бұрын

Thank you Donald!! Yeah that Machine is great for stuff like that!!☻

@georgedonner7478 4 ай бұрын

You are a man of many talents, EJ. Nice work!

@805ROADKING 4 ай бұрын

Thank you Buddy!!☻

@wyattoneable 4 ай бұрын

You're one talented individual.

@805ROADKING 4 ай бұрын

Thank you Wyatt!! As are you my friend!!☻

@357magdad 4 ай бұрын

Lookin' good! Mrs Magdad likes it too!

@805ROADKING 4 ай бұрын

Thank you Magdad's!!☻

@rcspud4648 4 ай бұрын

Looks great. My wheelchair seat and back are assembled the same way. Was thinking about redoing them black with red diamond stitching. Keep up the great work, it's inspiring.

@805ROADKING 4 ай бұрын

Thanks Spud!! That would look cool!! Next time I use a Diamond pattern on something I think I try a double stitch diamond!!☻

@Journeyman-Fixit 4 ай бұрын

Hey RK, looks much better - liked and shared - have a fantastic day!

@805ROADKING 4 ай бұрын

Thanks Jack!!☻

@victorbitter583 4 ай бұрын

Bloody nice job on that mate. Well done RK. cheers.

@805ROADKING 4 ай бұрын

Thank you Vic!!☻

@crasbee 4 ай бұрын

It's so nice to repair something that would've gone to the trash otherwise :)

@805ROADKING 4 ай бұрын

Yeah Buddy!!☻

@mr1pearl 4 ай бұрын

You have this upholstery thing down did you have your own business doing this so good 👌🏼 I looked back to some of your older videos 14 years wow I think I started watching a couple of years now ! I think Bruce was the one who mentioned you on one of his videos ! Nice work as always !!!

@victorbitter583 4 ай бұрын

No disrespect to Rk. I love the bloke and he quite often does a better job of it than I think I would have after doing 2 1/2 yrs of the trade apprenticeship, but he (and I doubt he'd argue this) is a long way from pro standards. He is also stubborn to not perform some industry tips that I give him. He's better than me though. Cheers.

@805ROADKING 4 ай бұрын

Thanks Bill!! Always did the upholstery on my own stuff since the 70's!! It's hard to believe I'll doing this YT stuff for 15 years at the end of May!!☻

@danielgraf8294 4 ай бұрын

Oh geez, now I might have to do my patio chairs!!

@805ROADKING 4 ай бұрын

Piece of cake Bud!!☻

@ToyManTelevision 4 ай бұрын

Hi!! Long time missing. Stuff happens I guess. Just nice to hear your voice! 😊

@rodneymiddleton9624 4 ай бұрын

You can do anything!!!!

@805ROADKING 4 ай бұрын

Thanks Rodney!!☻

@JesperValentine Ай бұрын

Looks beautiful, great work!

@805ROADKING Ай бұрын

Thank you Jesper!!☻

@TerryLawrence001 4 ай бұрын

Very nice! Tight like white on rice!

@805ROADKING 4 ай бұрын

Thanks Terry!!☻

@liljoeii6091 4 ай бұрын

Looks like a brand new chair I like your sticker that you put on your chair seals the deal thank you for the video

@805ROADKING 4 ай бұрын

Thank you Lil' Joe!!☻

@MattBrownbill 3 ай бұрын

I have some like this, but the slotted part is rusting. Probably past rescue. Great work there RK.

@ihus9950 4 ай бұрын

Looks really nice RK, 👍🏻😎

@805ROADKING 4 ай бұрын

Thanks Bud!!☻

@Turningwrenches85 Ай бұрын

You did good work sir, looks like brand new again 😎

@805ROADKING Ай бұрын

Thank you John!!☻

@twocvbloke 4 ай бұрын

No sitting down on the job until the chairs are built... :P

@chriholt 4 ай бұрын

Nice job as always! I loved the sticker at the end :) Is your Pfaff a commercial or heavy-duty machine?

@805ROADKING 4 ай бұрын

Thank you Chris!! The Pfaff is a Commercial Machine, I bought it off an Old Lady, she gave me a great deal on it!! The machine I used on this chair is a Sailrite LSZ-1, it's not technically a Commercial Machine but a super Heavy Duty machine designed to make Sails for Sailboats!! It was a Christmas present from the Wife a few years ago so I could do the seats in my F100!!☻

@thomasmurray3212 4 ай бұрын

RK: Always an interesting, informative and entertaining Video. Thank You.