Revell Mosquitto B Mk IV

Рет қаралды 27,911

4 жыл бұрын

Building the 1:48 Revell Mosquitto B Mk IV. It was a rather difficult build and some things went wrong during the build. The overall result Is acceptable.. I hope! Please commend if you like (or don't like) it.

Пікірлер: 73

@tomlander123 2 ай бұрын

My dad was a navigator over Italy so I had to have this model. I have had the kit for years. Watching your video helps to take the fear out of such a complicated build for a beginner. Dads plane had no guns of bombs since they flew night time reconnaissance. Finally shot down the night before the war ended and landed in a vineyard with no injuries but Dad and the pilot, Dale Keller were captured and thought they were going to be tortured but again the war ended and they were spared.

@jayrohumbertoguzmanvalenci1351 8 ай бұрын

Excellent work with the Mosquito. A beautyful plane. I like the weathering and the painting work. Thank you for share your amazing techniques. Máster Modeller I Salute You from Guatemala, The Land of Quetzal Bird, Símbol of Freedom.

@wbpsmodels3452 8 ай бұрын

Thank you very much! Greetings from Greece! :)

@firstnamelastname1101 3 жыл бұрын

Oh no! No chipping on mosquitoes because nearly the entire airframe was made of wood. I hate to be the one to tell you - sorry. Otherwise, the end result is quite nice. Thanks for sharing.

@chancerNW 3 жыл бұрын

Very nice work, excellent painting with just the right level of weathering. Well done a great looking Mossy

@wbpsmodels3452 3 жыл бұрын

Thank you very much for the kind words :)

@ragingpotato817 Жыл бұрын

I see your hand shake just a bit. I have a shaky hand also and it sucks when I’m doing fine lines haha. Big factor in me not becoming a surgeon or an electrician 😅. Amazing build great job

@patrickdavid5961 3 жыл бұрын

Enjoyed watching the video this morning... I love what you do... very good job

@wbpsmodels3452 3 жыл бұрын

Thank you very much! :)

@carlosteran5617 3 жыл бұрын

Beautiful job!!! I must admit that the mosquito is one plane with a look that I dont like at all , but was a great plane and it looks beautiful in your hands !!!

@normansmith8184 Жыл бұрын

Ill fitting kit or what! Nicely negotiated sir. Brilliant finish.

@wbpsmodels3452 Жыл бұрын

Thank you... as I recall, it wasn't ill fitting, although it wasn't a piece of cake.. ! :)

@StringerCourier 3 жыл бұрын

Nice job, and music was perfect. Tell me, how many times did you hold it, squint through one eye and pretend it was flying? Even at 68, I find I still do it ... Once a kid, always a kid.

@wbpsmodels3452 3 жыл бұрын

once a kid always a kid indeed... I'm nearing 60 and I do it too.. Thank you for your kind words :)

@gta4ever3003 3 жыл бұрын

It's so relaxing watching your clips! For me as a beginner it's also quite motivating and instructive!

@wbpsmodels3452 3 жыл бұрын

Glad you enjoy it!

@plasticmodelstudio 3 жыл бұрын

Hi! Nice job! Just now l’ m building the same model of the Mossy! It is interesting to compare our techniques!

@mikes5637 3 жыл бұрын

Years ago I built the Airfix 1/48 Mosquito and had a similar nightmare with the undercarriage. Finally got it all in only to realise after the glue had set they were back to front, so I had to break them off and redo. It never did sit right. Ended up giving it to a friend who seemed to think it was a work of art, for some reason.

@wbpsmodels3452 3 жыл бұрын

The expressions (or should I say expletives) I used at the time of building bear no repetition here... for the sake of propriety... ;)

@hubristicmystic 4 жыл бұрын

Nice detailed work.

@wbpsmodels3452 3 жыл бұрын

Thank you John :)

@johnprice7303 Жыл бұрын

Beautiful!

@SprueFascinationChannel 3 жыл бұрын

Nice build, subscribed!

@wbpsmodels3452 3 жыл бұрын

Thanks. Didn't know your channel... nice vids. Subscribed too! :)

@brianwatson1965 3 жыл бұрын

Fantastic!!!

@wbpsmodels3452 3 жыл бұрын

Thank you very much!

@alexanderk.8601 2 жыл бұрын

Nice job. Just a tip for the next time you glued something in the wrong way. Don't use the saw, just apply Tamiya thin Cement ones more, wait some time and you can take the parts away. The glue resolves the already fixed older glue ;-)

@wbpsmodels3452 2 жыл бұрын

I'll keep it in mind, but I honestly wish that I won't have to use that tip ;) Thank you nonetheless, it's a useful one! :)

@hadensutton7713 3 жыл бұрын

Perfect as I am about to build this

@wbpsmodels3452 3 жыл бұрын

Thank you!

@ElTeesModellingCorner 2 жыл бұрын

Nice work! I'm currently building the same model and it needs a lot of patience for sure... :-) I haven't built models in roughly 40 years, but still I didn't hesitate to get a level 5 model to begin with... LOL I wish I had paid more attention to the beginning of your build as that would have saved part of my sanity as I painted a lot of the parts before assembling them, which meant I had to scape the color off since the parts wouldn't stick together if they were painted, I use a brush to paint though...

@wbpsmodels3452 2 жыл бұрын

Not the easiest model to re-start with, especially the landing gear... Good luck with your model! Thank you for watching!

@ElTeesModellingCorner 2 жыл бұрын

@@wbpsmodels3452 I just got to the landing gear part of the build... My first mistake was painting the parts before assembling them and my second mistake was actually following the instructions on how to put it together... Fortunately I've managed to keep calm so far, but had I not cut the engine cover open the landing gear would have ended up in the trash can... Hahahahaha...

@plasticmodelstudio 2 жыл бұрын

Just finished the mine!

@PowerfulSlicer 3 жыл бұрын

Superb thanks

@wbpsmodels3452 3 жыл бұрын

Thank you :)

@ianjackson7515 2 жыл бұрын

Another good effort - not sure if you have already corrected the exhausts (they're upside down). Good techniques, you're definitely improving with each build.

@wbpsmodels3452 2 жыл бұрын

Yep, they WERE upside down... Noticed it after the vid was uploaded! Thank you for watching!

@zaynevanday142 3 жыл бұрын

I’m am so tempted to try the HK 1:32 Avro Lancaster 😂

@BeaRrug66 3 жыл бұрын

Where did you get the jig/stand holding the model while you painted? I was salivating.

@wbpsmodels3452 3 жыл бұрын

The wooden stand It's made by a guy here in Greece. He makes several wooden jigs for modellers, using a laser cutter and clever planning. I'll ask him if he's interested in shipping abroad. The glass rotating plate is from an old microwave oven.

@haydwilljones 2 жыл бұрын

Hi, very nice video, i am also thinking of getting this kit, would also like the wooden stand if the the guy who makes them changes his mind let me know as it would be very helpful.

@renestofregen4048 3 жыл бұрын

Looks great built him to But a kit with a lot of fit problems

@wbpsmodels3452 3 жыл бұрын

Wasn't that bad in fitting.. difficult yes.. ill fitting, not so much. I have seen better, I have seen much worse. Thanks for the comment :)

@renestofregen4048 3 жыл бұрын

Nice built Built him to, but a lot of fit problems and gaps

@wbpsmodels3452 3 жыл бұрын

Wasn't the easiest for me as well...

@joedomhan1806 2 жыл бұрын

Really beautiful. How long did it take you?

@wbpsmodels3452 2 жыл бұрын

Thank you very much! :) The total time from opening the box till putting it to the display, was something near 20-25 days (if I remember correctly)... However, not all time was spent on the build.. sometimes it takes 2-3 days between sessions (waiting for the paint to cure or the glue to set etc)... and sometimes i'm too busy (or too tired) to even get into the "workshop"... The actual work time (cleaning, assembling, painting, weathering) for the build was no more than 72 hours... (For a more precise answer I need to add the total video time and multiply it by 2)..

@scottmurphy650 3 жыл бұрын

All that careful painting but you did little with those awful seams on the fuselage and around the engine necelles? And the Mosquito was made primarily of wood so if there would only be chipping around the engines where metal was used.

@BeaRrug66 3 жыл бұрын

Would there be chipped paint, showing silver on the Mossy? It was made of wood.

@wbpsmodels3452 3 жыл бұрын

That's why I chipped only parts that were aluminum like wing joints.. I hope I didn't overdo it.

@uzarr6899 3 жыл бұрын

How do you get that look where some of the paint has come off, white paint? I’m not too sure

@wbpsmodels3452 3 жыл бұрын

It's called chipping... I use darkened aluminum color and a very thin brush to simulate the chipping of the paint with very tiny strokes

@uzarr6899 3 жыл бұрын

@@wbpsmodels3452 thanks

@foorcscale 2 жыл бұрын

why didnt you fill the big gaps and remove the join lines where you glued the parts together?

@wbpsmodels3452 2 жыл бұрын

Check at 22:00

@zaynevanday142 3 жыл бұрын

I saw the one they restored in NZ for its first flight in public at armistice day in Cambridge 2013 it was awesome 😎

@mikeevans9770 23 күн бұрын

DUH!!!!

@romans2500 3 жыл бұрын

Where is That Model Building rack? Plase

@wbpsmodels3452 3 жыл бұрын

It's made here in Greece by someone who makes those things as a hobby...

@romans2500 3 жыл бұрын

@@wbpsmodels3452 Can I order this from him?

@wbpsmodels3452 3 жыл бұрын

@@romans2500 I've tried to convince him to start shipping abroad, for the time he's not interested.. I'm sorry... If he changed his mind, i'll let you know. Where are you btw?

@romans2500 3 жыл бұрын

@@wbpsmodels3452 I'm from Germany. These model building rackeds are not available anywhere and would be a real box-office hit.

@HDDP 3 жыл бұрын

Would you consider selling your art work ?

@wbpsmodels3452 3 жыл бұрын

I have not thought about it, since I build models for my own pleasure... I might do a commission if asked, however the problem of shipping a model worldwide from Greece is an issue. On the other hand, I have never thought of a price for either selling or commissioning.. Why do you ask?