Purchase this 2007-2014 Chevrolet Tahoe Front Bumper at :
www.revemoto.com/collections/...
This removal works for :
2007 Chevrolet Tahoe
2008 Chevrolet Tahoe
2009 Chevrolet Tahoe
2010 Chevrolet Tahoe
2011 Chevrolet Tahoe
2012 Chevrolet Tahoe
2013 Chevrolet Tahoe
2014 Chevrolet Tahoe
Here is the easiest way to remove that front bumper off your 2007-2014 Chevrolet Tahoe. You can purchase everything you see in this video at :
www.revemoto.com/collections/...
2007-2014 Chevrolet Tahoe Front Bumper Removal :
We'll walk you through how to Removal of that 2007-2014 Chevrolet Tahoe Front Bumper , so you can do it at home and save money!!
Tools Needed :
7 Socket with Wrench
Screw Driver
Flat Head
Panel Remover (Optional)
00:00 - Intro
01:00 Fender Liner Removal
03:25 Foglight Harness
04:11 Under Bracket Removal
05:12 Top Bolts Removal
Removing the front bumper off a 2007-2014 Chevrolet Tahoe seems hard, but as you can see its a doable project at home. First you will need to remove the bolts and push pins on the sides of the bumper with a 7mm socket and with a flat head take off the push pins. Pull the fender liner back a little and unhook the foglight harness. Do the same thing you did here on the other side. Now go underneath the bumper were you locate two brackets. Using a 10mm take off the bolt that is holding each one of these brackets. Pop the hood open and you will locate around 8 bolts that holds the top part of the bumper. Use a 10mm to take off these bolts. Not too bad right? Congrats! You did it!!.
Need Parts for your 2007-2014 Chevrolet Tahoe go to : -www.revemoto.com/
Subscribe: kzfaq.info?su...
Follow Us on
FB: / revemoto
IG: / revemoto
Twitter: revemoto?lang=en
Tiktok : / revemoto
________________________________________________________
#Tahoe#2007Chevrolettahoe#2008ChevroletTahoe#2009ChevroletTahoe#2010Chevrolettahoe#2011Chevrolettahoe#2012Chevrolettahoe#2013chevrolettahoe#2014Chevrolettahoe#Chevrolet#Bumper#Tahoe#paintedautobodyparts #cars #partsforcars #carparts #Carbumper
DISCLAIMER: While ReveMoto tries to make the information in this video as accurate as possible, we make no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself (DIY) projects entail some risk. It is the sole responsibility of the viewer to assume this risk. ReveMoto is not responsible or liable for any loss, damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.