Shield saved my life in a nerf war.

The laser sight is actually special and very useful. You have to tilt the gun up for the laser to line up with the crosshairs so if someone's thirty feet away you'll hit them

I would put the shield on the blaster stock

The stryfe with the scope looks like Han Solo's blaster

3:11 Tactically deploy it... DEPLOY *TRIGGERED*

when ea starts making nerf blasters....

Make's a Modulus Expansion pack video, uses Stryfe. Only Coop772 would do that!

There was a flip clip kit too

I actually quite enjoy the barrel extension of the Spec-Ops Kit on the Stryfe. It mades it look more tacti-cool, and I might paint up the sight with the Elite colors. Add a nice Stockade or blue Worker stock, and bam. Something tacticool and comfortable!

how to trigger coop 101; give him a deploy and call the mag a "clip"

"It does not lock into the little female thing" 5:00

The Stealth Ops kit is essentially the Long Range kit with the Bipod replaced with the foregrip

you should do a retaliator combos vid. :) just realized you haven't done it.

Comments 50%: Missed the Flip Magazine Kit 25%: Retarded Five Year Olds That Think They Know Everything Using Inappropriate Language 23%: People Arguing That It's a Flip Clip or a Flip Mag 1%: People that don't understand the DLC joke 1%: Myself -_-

4:05 I like that old black red dot sight,looks cool

Fun fact, the blaster stock can shoot over the top of a stryfe. You don’t have to take it off to shoot it meaning it really is best suited to the stryfe over all other blasters

5:20 When that one kid got $100 for Christmas

i think the flash brake thing would look pretty cool on the uzies

The Modulus without a stock looks stupid.

"Holy expansion packs,Batman!" I'm dead!!XD lolz

01:09 Look! It's Han Solos gun

And at the end he forgot to say "stay tacti-cool"

a good attachment for the strike and defend sight gun might be one of those aftermarket rail attachments that can hold another magazine, to compensate for the lack of one compared to the normal stock, or the barrel break's ammo holder so you can increase it's capacity to 9 darts

The stealth opt kit's barrel extension is cool in my opinion, I am planning to seal up the holes and repaint it to make it look like a mini silencer.

I like being a sniper so I will use the sniper kit

my "flash hider" barrel attachment broke. thanks hasbro. just what I wanted. a broken barrel attachment.

I happen to think the spec ops barrel extension looks sick on a stryfe. Combined with a worker stock it kinda looks and feels like a Krinkov.

The Stealth Ops 'silencer' does have a similar locking mech to the Spectre's, but it is kinda more cheaply made than the spectre's (which has the same style as any other barrel extension vs a thin tooth holding it in place). A bit late, but I did recently pick up the Stealth ops one.

At least it's not on disc DLC... That stuff's the worst.

"You can tactically deploy it up and down"-Oh No! Coop's not tactic-cool!o:!!!

I've found that the original modulus scope is quite accurate when put on the strike and defend stock

I like how he sort of does the thing that you're supposed to do to prevent negligent discharges (where you keep your finger strait and not inside the trigger-guard)

Why did you test stuff on the Stryfe instead of the ES-10

The shield is a shield/sight

"So you can pretend like you're aiming" lol

Coop, u r the most helpful guy ever...I've been looking everywhere every store for those packs thx a lot

Thanks now I have the full set and you are awesome and now my sister gets scared of it when ever I bring it near her

Coop772 I'm a little curious why you used the Stryfe to demonstrate Modulus products.

the sight for the stealth ops kit actually does help you aim because it shoots out a red lazer pointer which you can shine on your targets. And you know the gun is facing right at them if the lazer pointer hits them.

i like the retaliator with the stock and the sniper barell thingy on the front.

I think long range kit's scope improves your accuracy, it it better that an empty tactical rail that you use for sniping

There is actually a flip clip upgrade kit also

This is awesome you helped me a lot to this gun

nice this was really informational

I put an Ionfire Dart holder on my blaster stock

DO A DEMOLISHER COMBOS EPISODE

With the Strike & Defend kit you'd want to put the shield on a side or bottom tactical rail or use the shield with another blaster/use stock with another blaster.

And the double magazine? Prety cool

You forgot to showcase the flip clip

you forgot the flip clip

Have you ever seen the Nerf velcro dart tag pistols that can attach to the bottom rail like a support grip that can fire? And would you ever consider modding a Triad to similar result?

Coop the holographic sight does help alot

So many giggity moments Comment 21 :|

He's funny as fuck like this if u think I'm right

The red dot sight actually does help you aim, the laser when centered is at the bottom of the sight, only if you slant your blaster up will the laser be in the center

If you take the foldable shield off the rail adapter, it can fit 2 darts in it by a squeeze fit

Stealth ops and long range is legit rapidstrike galore

You can add tape on any kind of barrel to make it stable!!

I just got my stealth ops kit in the mail today! It is so tacti-cool!

the cs6 scoop magnifies

the surpressor looks SWAG

The rail on the jolt stock is probably for an ammo holder from the ionfire/barrel break

the stealth extension is a suppressor and it surprisingly works on normal nerf guns

On the handle the rail is there for blasters that are straight so you can still fire the one dart

You could just glue a jolt to a normal stock..... And coop try putting a mega big shock on the bottom of a elite pistol so you kinda have a 2-in one demolished type pistol.

Strike and defend kit: The best combination is putting a laser on the modulus stock rail and a normal scope on the stock rail. Then you are REALLY equipped.

Is it bad that my personal combo consists of the blaster 2in1 stock, retaliator barrel, 25 round drum mag, modulous scope, vertical grip and an ammo holder on the stock on a modulous?

Wow coop those upgrade kits really are worth the money

I'm buying the strike and defend for the shield and using the stock as a secondary.

the red dot sight, actually works! the red dot is bending with the barrel so it works! i tried it without (18 round per) 6 hit where i was aiming with it was 12

I was considering getting a Stryfe up until you mentioned it was asymmetrical. I did not realize that

Cool i Love the stock for the same reason

The rail on the blaster stock could be used for the ionfire's extra dart holder, thing.

On the stike and defend stock put the barrel break dart holder on the stock's rail

Nerfs slogan is like "But it looks cool." lol

the holographic sights are usually called eotech 552s and eotech 556s

pretty cool video man

I got the one with the acog type scope a non moveable vertical grip and a regular stock

I have the modulus the red dot sight helps yours accuracy

For the strike and defend kit I put a Barrel Break dart holder (is that the gun that has it?) on the stock/weapon so I can have more darts in case

if you have a retaliator OR Alpha trooper tgen then you can use the extra dart in the handle of the blaster to use in your blaster stock

I like the standard modulus stock

Coop there's also the flip clip upgrade kit u should do a vid about that one

That looks like a so good modulas

the stealth ops kit is the best

I think on the stock for the strike and defend kit, on that rail is supposed to have a phone mount or a ammo holder

You should have added flip clip, I know it's not an attachment but it's a pack and kinda neat

Good, good. *Let the tactics flow through you!*

I've found that the stealth kit muzzle helps with accuracy a bit but the original barrel skews your accuracy because it give the round more room to move around compared to the stealth kit muzzle but the two combined work pretty well.

If I had a Modulus I would get the stealth ops kit, just because the grip and sight look really cool.

You could use the barrel break bullet holder on the stock/blaster.

the barrel extension for the stealth ops is definitely a giant muzzle break

Hiya coop ive only been watching your vids for a few days now and i love them. My favourite vids you make, are the combo videos so could u make one for the longshot👍

the reason longer barrels DO MAKE GUN MORE ACURATE is because the bullet/bb/pellet/dart hit the sides which help guide it further however it will make it a little less powerful, a small trade off

Here's a funny one I got the stroke and defend kit without the modulus or anything that has a tactical attachment. And I use The stock as a primary and I put the shield on it! But now I have to modulus

The red dot does help the light aims up a bit so you lift up the blaster and that little bit height will allow the dart to land on them not at them

You can put some dart storage for the stock blaster

thanks for planning on doing it for you

i remember these i miss them but they started getting expensive for guns that shoot darts. i have to admit this is cool though

Amazon sells all of these expansions individually which is awesome, including the blaster for $30, brilliant move by Amazon. Now you can buy everything individually and get it all at once and have exactly what you want without have to buy everything.