Revit Log Cabin Wall with Reveal Sweep!
Рет қаралды 6,485
Күн бұрын
@jaceecolette 10 ай бұрын
Amazinf help thanks so much
@designdiagonal Жыл бұрын
Assuming the head height is going to be consistent all around, you should consider creating three sets of reveal profiles with height matching the head heights and repeat in the wall revel properties so that the new set of reveal will start at the head ht. this should solve all your problems and won't have to do any of the modifying walls at the door openings and modifying wall sill lines in the floor plans. cheers.
@Studio_Hero Жыл бұрын
Love that approach, thanks for the tip!
@lediabucka6772 6 жыл бұрын
I've found that if you change the sill height of the door, it won't cause the issue you're having above the door. I simply changed mine at 1/4" instead of the default 0" and the issue was resolved. No need to add additional walls above the doors.
@Studio_Hero 6 жыл бұрын
That’s key! Thanks for figuring that issue out and sharing it!
@lediabucka6772 6 жыл бұрын
Thank you for the video! The option of using reveals instead of sweeps was so helpful for the project I'm working on!
@richyerich8872 5 жыл бұрын
hi...!! what if i need wood in the other direction??
@Studio_Hero 5 жыл бұрын
Hey! Do you need it to be 3D or just appear vertical? Here’s a video to a graphic trick you can try: kzfaq.info/get/bejne/hcmnm9uiu5PDYqM.html
@purplepikau 5 жыл бұрын
2 inches THICC
Corbin Patten Designs
Рет қаралды 1 М.