Reviving Your DJI Mavic Pro Battery with CP2112 & DJI Battery Software V2

Рет қаралды 5,443

Күн бұрын

In this video, we'll show you how to revive your DJI Mavic Pro Battery using the CP2112 debugging board!
If your Mavic Pro batteries are no longer charging, this is the video for you! We'll show you how to revive your batteries using the CP2112 debugging board and DJI Battery Killer V2 Software.
CP2112 Debugging Board Kit - Available directly from us, please email orders@webuydronessa.co.za for pricing & more info. #southafrica #only
The Kit will include,
* CP2112 Board
* Flash drive with the software
* Relative Cables for pinning into the battery.
For International viewers who require the software, please leave a small donation even if it's one dollar or 10, once donated email us at orders@webuydronessa.co.za and we will We Transfer you the software
Donate Any Amount here. www.backabuddy.co.za/campaign...
Email us once donated - orders@webuydronessa.co.za
Technical Support - repairs@webuydronessa.co.za
Thank you for watching, please consider subscribing it really helps the channel out.

Пікірлер: 37

@petebuka 3 ай бұрын

Great Video!... Just donated. CHEERS :)

@webuydronessa 2 ай бұрын

Awesome thank you!

@dsbimagensaereas Ай бұрын

I made the donation yesterday, and I'm waiting for the link to download the software, thank you

@AshrafRogers 25 күн бұрын

Hi. Did you receive the details?

@webuydronessa 24 күн бұрын

Thank you , please email us at orders@webuydronessa.co.za

@SpiceTech-sw5de Ай бұрын

great video can you use this method for bose revolve or soundlink batteries? Thaks

@nurvison4kproductions627 Ай бұрын

Thinking the same!

@AlexHarrison-bq9uq Ай бұрын

can you do this on a dji fvp 6s battery?

@SathwikRekapalli 3 ай бұрын

hey bro big fan of your work can you revive phantom 4 batteries using this method ?? as there are no videoss about it. PLS try to do a video soon Thanks Love from india

@webuydronessa 3 ай бұрын

Thanks so much, yes Phantom 4 batteries use the same method , video coming soon 😀

@angelvaca9232 2 ай бұрын

I made the connection without opening the battery and connected it together with its charger and was able to restore one, but my other battery recognizes it and reset its parameters with the software but it still does not turn on its LEDs or charge, what could it be? is for mavic 2 pro and the battery model is FB2

@OmwamiChief Ай бұрын

I have 4 almost brad new batteries out of storage that are not charging. DJI recommendation is to buy new batteries. That's a tall order and wanted to use your tools to give this a shot. I'm in the US. Can you let me know how you can help? Thanks.

@AshrafRogers 25 күн бұрын

Hi. Just pop us an email. Details in the description

@EttoreEsposito 27 күн бұрын

If I understood correctly, after the software reset the battery should be put on charge before using it for a flight correct? The BMS will take the ownership of managing the voltage level of the three cells, correct?

@AshrafRogers 25 күн бұрын

This is correct 👍🏼

@petebuka 2 ай бұрын

Can you test DJI charger before you unsolider the wires to see if it starts charging?

@AshrafRogers 2 ай бұрын

Hi. Not sure what you mean by this

@barend63 3 ай бұрын

Will this do the job for Mavic 3 batteries?

@webuydronessa 3 ай бұрын

Yes Mavic 3 and Mini 3 are both supported

@marthacintron3578 2 ай бұрын

I recently downloaded the Battery Killer software, DJI Battery Killer-20240524T204629Z-001. When I try to connect, I get ERROR: Could not open device. I don't want to break the batteries open and I sure as hell don't want to buy anymore. Can this software be used for Spark battery's?

@AshrafRogers 2 ай бұрын

Hi. It can be used for Spark batteries yes, but unfortunately if the voltage is too low, you will get the error : could not open / could not read etc. You would need to open the battery and put it on a balance charge at low current until each cell is approximately 3.5v. Thereafter Battery Killer will detect it and you can clear the PF, check cell health and charge it up normally again

@sunshynff Ай бұрын

@@AshrafRogers ...Mines a Mavic 2 Enterprise battery and doing the same thing, I bout the drone used, but it came with 3 batteries, 2 of them still brand new in the box, the one that's not working is one of the new ones. Do you have to take it apart to put it on the charger I'm guessing? I couldn't take two pins from my charger and put it to the battery as is could I?

@AshrafRogers Ай бұрын

@@sunshynff Hi. Unfortunately you would need to open it up yes. The battery connector on the outside connects to the BMS first, then each cell. So the BMS will not allow any voltage to pass to the cells if it has over-discharged. You must open it up to get each cell above 3.5v each and balanced, then connect above CP2112, clear the errors, check cell health, close, charge....... And then happy flying :D

@sunshynff Ай бұрын

@@AshrafRogers ...That's what I figured, thank you! Oh, BTW, dose the drone have any comms with the battery BMS??. I only ask because, on my Mavic pro 1, I ended up doing the lipo battery mod and it worked out well, the DJI GO app even showed all the telemetry of the battery and each cell. I recently upgraded to a Mavic Pro 2 Enterprise Advanced/thermal, but I haven't looked into any mods yet, nor do I really want to at this time, was just curious if that was an option? Thanks again!

@stayfocus18 2 ай бұрын

is there anyway to do this without opening the mavic pro battery?

@gregorius4648 2 ай бұрын

kzfaq.info/get/bejne/gZl0pdqq39C6pqM.htmlsi=_P3OBparcVXJr1E9

@gregorius4648 2 ай бұрын

Yes, I already included the link to the tutorial. But this method doesn't always work especially with the updated battery. Just try it.

@webuydronessa 2 ай бұрын

Yes 98% of the time you would need to open the battery , that method won't work if one or more cells are below 2.5 volts, then you HAVE TO open the battery , also you cannot balance the cells with a sealed battery.

@craigrodriguez8144 Ай бұрын

Donated last week and still haven't received the software link, are you guys just busy?

@webuydronessa Ай бұрын

Good Morning , please email us at orders@webuydronessa.co.za, our mails where down last week and we lost alot of emails , so we might have not recieved your email if you did send one