RevMan Tutorial - Entering Data For Meta-Analysis

Рет қаралды 236,726

Күн бұрын

In this video tutorial, I will show you how to set up and enter data in RevMan to be able to perform a meta-analysis. I will also describe the output of the results.
In the example, I will use a continuous data type. However, most of the settings apply to other data types, such as odds ratios.
RevMan version used: 5.3
THE ONLINE GUIDE
toptipbio.com/enter-data-into...
VIDEO BREAKDOWN
Step 1: Adding references for included studies (00:43)
Step 2: Adding a new comparison (02:37)
Step 3: Adding a new outcome (03:16)
Step 4: Adding studies and data to the new outcome (08:25)
Step 5: The output (09:07)
MORE HELPFUL HINTS & TIPS
toptipbio.com/
FOLLOW US
Facebook: / toptipbio
Twitter: / toptipbio
LinkedIn: / top-tip-bio

Пікірлер: 224

@StevenBradburn 4 жыл бұрын

THE ONLINE GUIDE toptipbio.com/enter-data-into-revman/

@sathyasiva3061 3 жыл бұрын

Hello for me outcomes are coming zero not show the analysis even though i added study comparsion and add study what do i want to do ?

@monikamohanty1686 3 жыл бұрын

For me also its zero. Please explain how to add literatures 1st to RevMan. Without adding its not possible to get acess to those papers. So its showing nothing.

@lifescience0208 2 жыл бұрын

Sir, I give it one tyr its showing zero in data table of the resutl. please help me out there..

@rkirwan1 2 жыл бұрын

Mate, I just want to say thank you for this. I have been terrified of stats all my life and in 12 minutes I've just performed my first MA (and sub-group analyses with the help of one of your other vids). Thank you so much. You're a total legend.

@SuzanneO-lq4dg 8 ай бұрын

I totally relate to that.

@govindchoudhary5632 7 ай бұрын

I wanna ask that can we do meta analysis as a thesis work for my post graduate research?

@katiegriffiths9952 2 жыл бұрын

Thank you so much, this was insanely helpful and so concise - I learnt more in these 12 minutes than in months!

@supernurseprivatedutyrn 8 ай бұрын

That was very helpful. Until I watched this I did not understand most of what these statistics meant, nor Revman. Thanks to you, you made that a lot easier. Thank you.

@MeleDrummer 2 жыл бұрын

13 minutes of pure gold, thanks so much

@HamidtheOncologist 3 жыл бұрын

WOW! just wow! Thank you for teaching me this. So basically, none of those fancy graphs that i was scared off was not done by the authors. interesting.

@dime3868 3 жыл бұрын

But hey let's keep it a secret now?

@nagitagianty329 4 жыл бұрын

Hi! This is very helpful and the explanation is very easy to understand. Thank you so much!

@zoejacob2736 3 жыл бұрын

This is an outstanding tutorial - thank you!

@explorewise 4 жыл бұрын

Very accurate information, Thank You so much for this !!!

@KetzarlyGallardo 5 жыл бұрын

THANK YOU SO MUCH FOR THIS!!!! IT WAS A GREAT HELP THANK YOU SO SO MUCH

@monikamohanty1686 3 жыл бұрын

Hii Can RevMan be used in Engineering field? Can I add own database to RevMan? Hoe to add own database to RevMan ? Please help

@TheWellknownperson 3 жыл бұрын

THANK YOU! considered as one of the most helpful tutorial

@anastasiospsarras1031 3 жыл бұрын

Excellent explanation, thank you very much!

@vickiliew9153 5 жыл бұрын

The best explanation ever!!! Thank you so much.

@StevenBradburn 5 жыл бұрын

You're very welcome

@SaedASulub 4 жыл бұрын

This is a wonderful explanation. Thank you

@ploylin2606 4 жыл бұрын

Very helpful tutorial ! Thank you :)

@healthscopebyhemworks Жыл бұрын

Wooooww... Excellent explanation of something I was quite afraid of venturing into.. THANK YOU A MILLION TTB

@oceanswave 4 жыл бұрын

This is so helpful, thanks a lot!!

@freddyshami1677 5 жыл бұрын

it was a really helpful tutorial thank you

@joshuabwalya4906 4 жыл бұрын

Thank you very much! This is very helpful.

@Thesimpletonsfamily 3 жыл бұрын

Thanks for bringing out this great tutorial. It's very helpful for first time rev man users like myself.

@StevenBradburn 3 жыл бұрын

Very welcome

@achiardi 4 жыл бұрын

So clear! Thank you so much!!!

@batmanarkham5120 3 жыл бұрын

Very well succinct description. Thank you

@JamesMayJr1 4 жыл бұрын

Thanks man much appreciated

@cianr8452 2 жыл бұрын

Doing my first SR at the moment. This video has been amazingly helpful, thank you so much from a stressed postgrad student ❤️🥰❤️🥰

@StevenBradburn 2 жыл бұрын

Thanks Cian. Good luck with it!

@positron-xq5cp 4 жыл бұрын

This is wonderful. Thank you very much!

@StevenBradburn 4 жыл бұрын

You are very welcome

@innocentwafula1251 4 жыл бұрын

Very helpful. Thank you!

@wajeehaaslam6515 3 жыл бұрын

Thank you! Q: which data do you input fot the meta-analysis when each study has a before and after treatment mean and std. dev. for both the control and intervention groups?

@nishok938 2 жыл бұрын

This was pretty helpful, thank you!

@SeanpKelly97 2 жыл бұрын

Great video mate. Really helpful 🙌

@joelswai875 5 жыл бұрын

Good job! Thank you..

@adaneali6838 2 жыл бұрын

Thank you very much. It helped me a lot. Clear, precise, and highly informative vedio.

@susanhwalker5432 2 жыл бұрын

This is a really helpful quick introduction

@joshbond795 3 жыл бұрын

Thank you for this video I no longer feel scared to figure out the results for my meta analysis!

@StevenBradburn 3 жыл бұрын

Glad it was helpful!

@lucyrose9086 4 жыл бұрын

You saved me! Thanks so much for this helpful tutorial :)

@StevenBradburn 4 жыл бұрын

Very welcome

@2000charp 3 жыл бұрын

Thank you so much! The tutorial was very informative and it has helped me a lot!

@StevenBradburn 3 жыл бұрын

Glad it helped!

@stopmotioncookingvideos 5 жыл бұрын

very helpful thank you.

@chrisbeard7026 2 жыл бұрын

Awesome video. Thank you so much.

@sagardholariya1156 2 жыл бұрын

Thank you for uploading a useful video. Suppose in the study there is a measurement of median and range instead of mean and SD, then How can we draw foster plot or which type of data we can use ?

@tosinojo7310 5 жыл бұрын

love this thanks a lot

@michaelberry4996 3 жыл бұрын

Extremely helpful, thank you!

@StevenBradburn 3 жыл бұрын

Thanks Michael

@sakiryilmaz1040 3 жыл бұрын

Thank you. this is so helpful.

@mandeepkaur4614 4 жыл бұрын

Love this...thank you sir

@shabinafatma562 5 ай бұрын

Very well explained....hatsoff....

@yohaneswilliam1995 9 ай бұрын

perfect introduction video, thank you

@berthachan5163 3 жыл бұрын

you literally save my meta analysis! not gonna lie, but thank you so much!

@StevenBradburn 3 жыл бұрын

Very welcome!

@carolijn5557 4 жыл бұрын

Thanks for the explanation! which data type should I use when comparing the prevelance of a complication between a 'severe' and a 'less severe' group of patients with the same disease? also continues?

@benjaminjones3043 5 жыл бұрын

If my outcome is Accuracy for a diagnostic (or in this case bioinformatical) tool - which choice would I select for outcome measure?

@ariannabossi4022 2 жыл бұрын

YOU ARE A LIFESAVER

@olcayonen8906 4 жыл бұрын

Hi. Thanks for the great videos. I just wonder how do I enter my pre-post means and standart deviations for experimental and control groups. In your example as far as I understood you have post data for 2 groups. I have both pre test and post test results (Means SDs and number of participants for both experimental and control groups). Thanks in advance

@manolousi 2 жыл бұрын

Pure gold. Thankyou

@niamhx3240 4 жыл бұрын

This was very helpful thank you :)

@StevenBradburn 4 жыл бұрын

You are very welcome :)

@dustun9558 2 жыл бұрын

You sir are a godsend!

@adelhijazi9091 4 жыл бұрын

Thank you so much!

@fyllaki2574 2 жыл бұрын

Hello, thank you for the great video! i have a question..do I put the pre-values of Intervention and control? or the post-values? or the mean difference? thank you in advance!

@andreipasca9016 4 жыл бұрын

Very good explanation. Thank you.

@StevenBradburn 4 жыл бұрын

Thanks Andrei

@drsameer234 Жыл бұрын

Amazingly explained everything. Could you please do a video on sensitivity analysis

@sambean9765 3 жыл бұрын

That is the best video for someone like me, who has never done MA or worked with a Revman. I am stuck at the beginning. In the studies, shall I enter all relevant clinical trials about the drug I am study, or shall I enter the publications raised from these clinical trials?

@twicecryforme1920 3 жыл бұрын

Does anyone know if I’m comparing side effects would I need to use dichotomous or generic inverse variance ? Thank you

@musicdude1coma147 Жыл бұрын

so useful, thanks for this

@ngocminh99999 2 жыл бұрын

thank you for your video!

@amriadhyatma 2 жыл бұрын

bro it really helped a lot. much appreciated thank you man!

@StevenBradburn 2 жыл бұрын

Very welcome mate

@shaimaaaboeldalyl6602 3 жыл бұрын

Marvellous Very helpful Could you please highlight If there is a way to measure AUC and cut offs using Revman?

@bashiruabidemi9055 11 күн бұрын

Thank you for this video

@nimaghaffarzadegan791 2 жыл бұрын

THANK YOU SO MUCH!!

@fari1025 2 жыл бұрын

Thank you so much .

@jackcannon3359 3 жыл бұрын

Nice... Thanks for sharing...

@getchrismo 3 жыл бұрын

Great tutorial

@nathan-zuckerman Жыл бұрын

At around minute 11:00, is there a way to set the scale intervals? For instance, the x-axis of my meta-analysis in revman shows numbers like "0.5 - 0.7 - 1 - 1.5 - 2". If I change the scaling, the numbers change but the intervals don't have the same size. I want the numbers to have the same distance to each other, like "0.5 - 0.75 - 1 - 1.25 - 1.5" and so on. Is that possible? Thank you very much.

@DannyCounty 2 жыл бұрын

Absolute belter of a video! "How to be scientist" KZfaq tutorial 😂

@Mohamedarc 3 жыл бұрын

big help, thank you!

@StevenBradburn 3 жыл бұрын

You're welcome!

@athanasiosdaveronas472 4 жыл бұрын

Great work!

@StevenBradburn 4 жыл бұрын

Thank you :)

@tiamnowrouzzadeh7615 4 жыл бұрын

i have done my forrest plot and got z value of 6.68 and my standardized mean difference was -0.46 (P

@zhizhuosu6904 3 жыл бұрын

Wow! Thanks a lot!

@faithcolombo972 4 жыл бұрын

Hi! I have different datas from yours...how can I start from r and P to find mean and DS?

@mewes2740 5 жыл бұрын

wow thank you so much!!!!

@StevenBradburn 5 жыл бұрын

You are very welcome :)

@markusleyer3299 3 жыл бұрын

Is there a way to see pooled values from the studies?

@leebella-mw2rc Жыл бұрын

thank you very much

@yusrahassan9168 4 жыл бұрын

Great work explaining this! If you're analyzing an outcome measure from each study that was collected at two time points (I.e baseline vs. 6 weeks post baseline), which mean value (I.e. baseline? Post 6 weeks? Mean difference?) is entered for each group (I.e. intervention and control) when entering data?

@g46rizarlazuardy39 3 күн бұрын

Have you got any answers for this? Because i appear to have the same problem. Thanks in advance.

@antonellopinna2860 3 жыл бұрын

Can I do a Forest plot only having F values and P values? Studies don't always provide mean and SD(or SEM)

@jamiloahmed8150 2 жыл бұрын

Thankyou so much

@sabrinapereira162 4 жыл бұрын

Thank you very much!

@StevenBradburn 4 жыл бұрын

You're welcome!

@bongbong-xn6oc 3 жыл бұрын

Hey is it possible to make plot with only mean differences? without SD. thanks for the video!

@purnimakushwaha2882 3 жыл бұрын

which value of mean and sd from articles have to put in table to generate forest plot??? plz reply

@bhavnagupta5122 3 жыл бұрын

How to do co relation analysis of combined studies for meta analysis on RevMan..please tell, will be really helpful. Thanks

@sunzarora 4 жыл бұрын

Any video for analysing outcome measures of each studies?

@phi5269 Жыл бұрын

Thank you very much for this video. I'm wondering about how to use RevMan to do risk of bias assessments... Also, is it possible to use RevMan to assess risk of bias for Exposure-type studies, and not Intervention-type studies...? I would appreciate the feedback...

@user-si4ii7bt3s 5 ай бұрын

which data type to select if I want a comparison of different dissolution profiles of Vitamin D in different drug delivery systems?

@MrChiggy1989 Жыл бұрын

Thank you

@aijul5722 Жыл бұрын

Good job

@amyrubbs 5 жыл бұрын

Hi! This was helpful for my cross over studies, but what format/ how do we enter data and make a forest plot if its prospective cohort? I have two groups and a before and after from each group. There is no RR so we would have to use mean. Any help would be greatly appreciated! Thank you!

@StevenBradburn 5 жыл бұрын

Hi Heather, Many thanks for your comment. What data do you have? If you have counts, ie events/non-events in control/treated groups, then you can get RevMan to calculate the RR and OR etc in the Calculator. Best wishes, Steven

@marioalbertoisiordiaespino2618 4 жыл бұрын

hello. I have a doubt. According to the means you use in the example, it can be seen that the means on the left side are greater than those on the right side. I would assume that the difference in means would be in favor of the left side but I see that almost all the results in the graphs fall in favor of the right side. Why does this happen? O.O

@KLoPEsKat 2 жыл бұрын

Thank you so much for the explanation! I'm starting to analyze the results of my first SR and I can say I did not know a thing about meta-analysis. What do you do when some studies give you the mean and others give you the median and range?

@pattymitre3580 Жыл бұрын

So? What do you do?

@pattymitre3580 Жыл бұрын

So? What do you do?

@SuperApril98 5 жыл бұрын

I love you, this video saved my ass

@user-ut7cr1hb9g 9 ай бұрын

Thank you so much for uploading this! really helpful for understanding revman. When I try to use revman, I only have the option for making a "practice review" does anyone know why this keeps happening/does it mean it won't save my data?

@mirumer5826 3 жыл бұрын

It was great...thankyouu

@StevenBradburn 3 жыл бұрын

Very welcome

@uzo8458 3 жыл бұрын

Amazing video . I tried the steps tho but my study data wouldn’t load . Any tips pls ?

@radhawe 6 ай бұрын

Exuse me , Where can I get a training data sheet example of the software data sheet ?

@maliklatief844 2 жыл бұрын

Hii sir, it is very nice video. Thanks for teaching the revman. I have a question, which is what type of file does the revman accept, I mean does it accept the pdf format?? Kindly reply