Revolve in-depth in Creo Parametric

No video

Revolve in-depth in Creo Parametric

Рет қаралды 15,939

3 жыл бұрын

Let's design this machine part in Creo Parametric
Sweep in-depth in Creo Parametric
• Sweep in-depth in Creo...
Extrude feature in-depth in Creo Parametric
• Extrude in-depth in Cr...

Пікірлер: 23

@rounakadhikari1410 3 жыл бұрын

Thanks a lot my friend, outstanding teaching. You have an in depth knowledge about the software. One question from where do you get all these sketches and how do you keep your sketch on simultaneously making the part?

@AO-mm9eq 3 жыл бұрын

Thanks a lot, well explained

@j.madhusudhanraju495 Ай бұрын

sir , can you tell the how to get (2d sketch)2D draft beside the workplace

@niharika9524 3 жыл бұрын

Thanks sir Very helpful vedio 👍🏼

@CADxTraining 3 жыл бұрын

Most welcome

@omkarsutar578 3 жыл бұрын

Sir very impressive 🔥 and difficult for beginner 🥵 Thanks ♥️

@nothingbutengineering 3 жыл бұрын

How are you able to record the screen with the picture aside? I tried it in OBS studio. But, it comes out at output end and its not visible during actual modeling process. Can you help me sort this out?

@shvantawfiq9214 11 ай бұрын

Hi! Your videos very good we use it in school now in sweden 2023/9. Please have you vidoe about FEA simulate creo?

@hanikhalil8569 7 ай бұрын

Hi sir please how to make a revolve and the axis is in a different plane than the section please advise thanks

@gaurishankarpatil8311 2 жыл бұрын

Sir you are doing a great job for beginners like us...i have a question, when we should take datums...n from drawing how we come to know that we should take datum here and draw sketch? Can you make a special video on datum system?

@CADxTraining 2 жыл бұрын

I didn't get your question properly. Can you please tell me, what is your exact problem. What is the actual confusion.

@dominiquenicolle67 3 жыл бұрын

Thanks a lot friend, excellent teaching. One question, how do get the very useful "clip model" icon in the views bar? I'm with Creo 7.0 and, unless my lack of knowledge, I can't find it. Thanks a lot for assistance by anticipation.

@CADxTraining 3 жыл бұрын

Just right click on that toolbar, you will get the check box option to select it.

@dominiquenicolle67 3 жыл бұрын

@@CADxTraining Thanks a lot for prompt reply. Actually icon design has changed from Creo 6 to Creo 7

@parashuramnaik8198 3 жыл бұрын

Please give all drawings pdf links whichever used in all models

@jishuguchhait1530 3 жыл бұрын

12:55, In my model tree, there none of the axes are shown seperately just the 'Revolve 1' and the planes and coordinate system; I'm using creo 7.

@CADxTraining 3 жыл бұрын

Those Centre axis which you see in the model tree, these Centre axis are predefined. You can create it one by one just by selecting two datum planes at a time. So if you have these Central Line predefine, CREO does not generate any Centre line inside the revolve.

@jishuguchhait1530 3 жыл бұрын

@@CADxTraining Ok I got it, thank you.

@maheshpandey951 3 жыл бұрын

sir ji sb kuch sahi h but please mouse ko dimension pe rakh ke dikhaya karen ki design me konsi dimension ki baat kr rhe ho pta hi nhi chalta ki konsi put kr rhe ho bas aap kar dete ho please