➢Store: www.benkispec.com ➢Instagram @rex_hyt / rex_hyt ➢Discord: / discord DISCOUNT ON TOOLS - REX10 For 10% OFF: garagetools.co... ⬇ My Postal Address ⬇ 💌📫 P.O. Box 2178 Brighton North 3186, Australia, Victoria
Пікірлер: 82
@happymanowns2 жыл бұрын
FYI these engines have a failsafe and will run without coolant, they will run on a few cylinders and swap when they get too hot. Should be able to do 50km+ no worries.
@Smokerup2 жыл бұрын
Cool Is that the same for BA motors?
@Whyunounderstand2 жыл бұрын
The mighty AU does not need coolant or oil
@happymanowns2 жыл бұрын
@@Smokerup Most likely do, check the manual. I know someone who drove a BA for a few weeks in Townsville with no radiator around 5 years ago and the car is still running fine as a daily still
@galactica19802 жыл бұрын
There are power and speed limits to be safe and I'm pretty sure it goes into limp mode.
@mikeA2922 жыл бұрын
street glides do that at idle, fire on one cylinder, alternating...
@blokebeershed76512 жыл бұрын
I recon the reason that wheel bearing went was the spacer, put alot more stress on the bearing itself with more leverage, get use to replacing them with spacers
@jaredpursey37912 жыл бұрын
I've absolutely abused my ute with 1inch spacers and neg 22 rims... 30,000km absolutely 0 issues.
@blokebeershed76512 жыл бұрын
@@jaredpursey3791 i had issues after 10,000km with a 1 inch spacer and neg 22's. Car has done 30,000km and have done wheel bearings on both sides twice. Yes im putting them on properly.
@jamessulja27072 жыл бұрын
The reason Why the bearing failed is because the bearing hub nut wasn’t torque to 300 foot pounds .
@blokebeershed76512 жыл бұрын
@@jamessulja2707 i prefer mine torqued to 410nm...
@SHOCKcustoms2 жыл бұрын
Au doesnt need water. Can skid it for hrs without oil or water👍
@HazeyAuto2 жыл бұрын
I like how you replaced the tank with another second hand unit- wont be long before you go through this process again. Barns have new ones that are better than OE for like sixty bucks, or you could even get an alloy one that will last as long as the car does.
@CaptainRedBeardarrr2 жыл бұрын
I skidded an AU for over 3 years with those extractors and never had an expansion tank issue. I now run an LS powered triton using an AU tank and again, second hand tank with no issues.
@HazeyAuto2 жыл бұрын
@@CaptainRedBeardarrr well done. You can have one biscuit from the tin.
@CaptainRedBeardarrr2 жыл бұрын
@@HazeyAuto yum!
@benni7272 жыл бұрын
4480s melt every thimg on that side i used a factory ba turbo heat shield they fit mint over 4480s n stopped melting bottles and the loom on that side
@scarnon67762 жыл бұрын
It was probably caused by the extractors since there so close to the expansion tank now I think people use the turbo barra heat shield for the 4480s
@dyIanVII2 жыл бұрын
Nah it's just age, even with stock headers with the heat shield the same thing will happen
@seanm9962 жыл бұрын
sounds about right - I bet that would also save the clutch cable from early retirement and keep the engine bay cooler in general!
@dexter777692 жыл бұрын
the wheel bearing mightve been fine with that much camber, but that much camber plus the massive wheel spacer wouldve been why it was fuckd
@peter_brash2 жыл бұрын
1:32 That’s one way to make a triton prettier 🤣
@RexH2 жыл бұрын
😂😂🤣🤣🤣 you saw it
@fordfan03512 жыл бұрын
So did i
@peter_brash2 жыл бұрын
@@fordfan0351 nice profile pic 🤣
@fordfan03512 жыл бұрын
@@peter_brash haha au go vroom
@fordfan03512 жыл бұрын
@@peter_brash saw an opportunity and i took it
@orloxsisАй бұрын
Just FYI - The heat from the 4480s being so close is what caused this.
@RetroGalixis2 жыл бұрын
bird sounds are really calming
@jf_402 жыл бұрын
Saw the mighty AU out and about last night, loving the work so far
@peter_brash2 жыл бұрын
SXYCAL is honestly a character in this video 🤣🤣
@leewood52402 жыл бұрын
The overflow burst because you don't have the right temp spec cap common problem as the after market one's are rated abit higher temp than the factory one and the wheel bearing failed because of the extra load put on them by the wrong wheels that needs a spacer to fit them on an au rectify these problems and you will stop breaking things
@12fourty892 жыл бұрын
Thanks Benkispec for my order, From NZ ☝🏽
@shaunlangenberg2 жыл бұрын
I wonder if some sort of heat shield would prevent it popping open in the future?
@mr2madness522 жыл бұрын
That camera quality is brilliant love it 😍
@bvgbill83252 жыл бұрын
Not much fun when having problems and yes the same thing with my AU thermo fans aren't turning on just the little things are always frustrating but staysafe mate cheers from Bill
@brycemarten65802 жыл бұрын
No surprise haveing larger headers near the tank and no heat shield buy a alloy overflow tank on ebay
@bn4682 жыл бұрын
Get a metal overflow please
@brycemarten65802 жыл бұрын
Spacers do reduce the life of your wheel bearings
@INORBET2 жыл бұрын
Just get some ugly tin and make an ugly shield , I need to do the same , although mine ain’t as bad as what yours just did 😂😂😂❤️❤️❤️
@jackmcdonald62262 жыл бұрын
Not broken just small inconvenience
@georgegoodall35732 жыл бұрын
That's and the power steering leaking on the exhaust and catching fire are both issues iv had like 3 times
@cea-jaymales80312 жыл бұрын
I did my wheel bearings on my forte III like 2 weeks ago, . . I'm surprised you didn't have to use a bearing puller. . . I certainly did haha
@CaptainRedBeardarrr2 жыл бұрын
He replaced the whole hub..
@cea-jaymales80312 жыл бұрын
@@CaptainRedBeardarrr yeah so did I. . .
@liambenno2 жыл бұрын
Fix or repair daily lad
@Baz96672 жыл бұрын
Just as well you never sold the Camry 🤣😅
@xFoRgot3nFobz2 жыл бұрын
Shit I changed all 4 sets of brake pads on my BA Falcon recently because they were screeching and since then the screeching has stopped except for this rhythmic scraping that only happens at lower speed and sounds like its coming from my front driver wheel, I jacked it up again the other day to see if there was an obstructions that could cause it to be scraping but couldn't really see anything obvious except I notices my wheel bearings has noticeable play like in this video. could that play be causing the scraping noise?
@padraigrab082 жыл бұрын
That would be it 100%
@jtxp59422 жыл бұрын
Don't have a fire extinguisher.. in a car that was mainly built for a track purposes.. 💀🤦♂️
@raoul60832 жыл бұрын
im no aussie but mate this car barely runs, i think wheel bearings are the least of your worries
@krispykruzer2 жыл бұрын
I liked, because less falcon content and more chaser content makes me happier :)
@driftking65532 жыл бұрын
Lol mine au xr6 and turbo and done 900,000kms so far and still lives on 10psi and 550kw
@benni7272 жыл бұрын
🤥
@Akisga2 жыл бұрын
Mighty intech woke up on the wrong side of the bed
@livingonlysclassics2 жыл бұрын
Hey is it possible modify a 2000 Toyota Corolla CE 1.8 it's my first car and I'm tryna get some more performance out of it.
@GreenAndGoldAussie132 жыл бұрын
rex hunt
@jaredpursey37912 жыл бұрын
The tool pro 12v ratchet is discounted for some STUPID reason.
@calebgray90112 жыл бұрын
very common problem
@Just.co0p3r2 жыл бұрын
yeah the rexton
@danielhutchinson64272 жыл бұрын
well ford does stand for fix o repair daily
@JorgieTV012 жыл бұрын
Not really.
@lincolnking90392 жыл бұрын
Haha mine has the same problem but at the front and not as bad
@ricknel76nelson542 жыл бұрын
Just take the cap off and drive it home.
@alexivanovv2 жыл бұрын
Still haven’t heard from toolpro😢
@khobistringer42722 жыл бұрын
AU's don't need coolant
@stevenbullock32282 жыл бұрын
It is a ford all Breakdown
@bluegrass46102 жыл бұрын
Anyone know the wheels he is running on the au
@padraigrab082 жыл бұрын
Their just steelies if im not mistaken no brand i dont think
@cameronsteven79412 жыл бұрын
How many ks does the mighty au have on the clock?
@Jskuxdlux2 жыл бұрын
your au not finding idle, just leave the battery unplugged over night, had that issue on a few of mine when ive changed the coil pack or leads.
@gokupokemon30402 жыл бұрын
Hi 10/10👍👍
@aradham67192 жыл бұрын
ford things 😂
@aussiehq27432 жыл бұрын
Don’t forget to like people👍
@ANIMALragemode2 жыл бұрын
How are we boys? Yeah nah.
@RexH2 жыл бұрын
Doing good OG_street
@risingsundetail16902 жыл бұрын
Second
@sosa598552 жыл бұрын
first
@hirolla29272 жыл бұрын
stupid car
@Subuwu2 жыл бұрын
Mine legit went a few weeks back. Lucky I was near a bursons and just got one in store and installed it where the car sat