Fast freehand sharpening: no jigs, no guides, no sandpaper.

Рет қаралды 257,602

4 жыл бұрын

Learn to sharpen with just your hands and affordable oil-stones.
More video and exclusive content: / rexkrueger
Tools/Materials for Sharpening (affiliate): Scroll down!
Norton Two-Sided Crystolon Stone: amzn.to/33eEfVl
Dan's Whetstone Arkansas Fine Stone: amzn.to/3gkbk5T (These went up in price a little).
Green polishing compound: amzn.to/3i9t7xx
3-in-1 Oil: amzn.to/3gjBrdx
Honing guide (for grinding): amzn.to/2DcaslJ
Kreg Marking Jig (The blue thing I use to set angles): amzn.to/2DrB2qA
Super 77 Spray Adhesive: amzn.to/3fiSbjM
Other Tools in This Video (affiliate):
My new Ryoba Saw: amzn.to/3gj8pe1
Modern Stanley Plane: amzn.to/2XgbTGH
Sign up for Fabrication First, my FREE newsletter: eepurl.com/gRhEVT
Become a member of this channel!
Get custom badges and emojis you can use during chats: / @rexkrueger
Wood Work for Humans Tool List (affiliate):
Stanley 12-404 Handplane: amzn.to/2TjW5mo
Honing Guide: amzn.to/2TaJEZM
Green buffing compound: amzn.to/2XuUBE2
Cheap metal/plastic hammer for plane adjusting: amzn.to/2XyE7Ln
Spade Bits: amzn.to/2U5kvML
Metal File: amzn.to/2CM985y (I don't own this one, but it looks good and gets good reviews. DOESN'T NEED A HANDLE)
My favorite file handles: amzn.to/2TPNPpr
Block Plane Iron (if you can't find a used one): amzn.to/2I6V1vh
Stanley Marking Knife: amzn.to/2Ewrxo3
Mini-Hacksaw: amzn.to/2QlJR85
Blue Kreg measuring jig: amzn.to/2QTnKYd
Blue Handled Marples Chisels: amzn.to/2tVJARY
Suizan Dozuki Handsaw: amzn.to/3abRyXB
Vaughan Ryoba Handsaw: amzn.to/2GS96M0
Glue Dispenser Bottle: amzn.to/30ltwoB
Orange F Clamps: amzn.to/2u3tp4X
Blue Painters Tape: amzn.to/35V1Bgo
Round-head Protractor: amzn.to/37fJ6oz
5 Minute Epoxy: amzn.to/37lTfjK
Dewalt Panel Saw: amzn.to/2HJqGmO
Get my woodturning book: www.rexkrueger.com/book
Follow me on Instagram: @rexkrueger

Пікірлер: 629

@corncobjohnsonreal 4 жыл бұрын

Thank you for being the voice brave enough to speak up against microbevels

@haqvor 4 жыл бұрын

I don't get the microbevel thing. The only thing that it seems to do is to postpone removing most of the metal to a later date. Unless you have a low speed grinder that can make that job i a hurry those times are going to suck more than the couple of seconds you save on each sharpening. I see a point with the backbevel on a plane iron, instead of requiring the whole back to be flat it is enough to only have the last fraction of a mm that touches the wood flat.

@j4gs223 4 жыл бұрын

I think Paul Sellers also mentioned once that micro bevels are not necessary, he just polished the whole bevel because his diamond plates were fast enough, I tend to use a microbevel, but after a lot of sharpenings I just rub the primary bevel on my stone a couple of times, so the micro does not get so big

@haqvor 4 жыл бұрын

@@j4gs223 you only flatten the back once so I think it is worth that effort in the beginning to not have to worry about it later. James Wright also think that it's better to do it once and be done with it. I just watched an older video with Paul Sellers when he restored an old rusty plane. He had a very practical method to solve a convex back. Give it a good hit with a nylon hammer to take care of the worst problem.

@jjbailey01 4 жыл бұрын

@@haqvor @DoomSlayer wasn't talking about flattening the back. He was talking about how Paul Sellers grinds the whole bevel and doesn't worry about a micro bevel. Flattening the whole back is a slightly different topic.

@haqvor 4 жыл бұрын

@@jjbailey01 sorry about that, I'm obviously too tired to read straight...

@originalmouse 4 жыл бұрын

"when my neighbors throw out their furniture, I go out there and skin it like a dead buffalo" Out of context quotes are sometimes brilliant.

@jimcarter4929 4 жыл бұрын

Done this for my vises. Seems like if you are going to take off burr between stones it would be better to take burr off on stone you made it on to keep next stone clean.

@christopherwaterman4925 4 жыл бұрын

Imagine getting your morning cup of joe. You smell it and take your first sip. Perfect. You think to yourself, “today is going to be a good day. Hey, I wonder if anyone hauled off that old chair. I hope some young couple, just starting out, saw it. They’ll throw an afghan over it, to hide the worn parts. It will make their first move. Maybe they’ll have it reupholstered for sentimental reasons.” You walk out onto the front porch hoping to see it has been claimed. Instead someone resembling Lex Luther (from the 90’s animated series) with a buck knife is hunched over the old chair, filleting it away from its skin and your vicarious day dream ambitions. He pauses his gruesome work to raise his head and inspect you; coffee, slippers, flannel pajama pants, Pink Floyd t-shirt. You take a sip and look back at his face. It’s a wild look in his eye.

@gnarthdarkanen7464 4 жыл бұрын

AND When my neighbors through out their old dead buffalo, I get after it like Rex's neighbor's couch! ;o)

@mikebolton2388 4 жыл бұрын

@merchandise 7X ... As expected, you find the street desolate. Only a grey-striped housecat sits on the adjacent lawn cleaning himself unaware of the events that had just unfolded. The smell of coffee tugs on the neurons on in already confused head, sat down, letting warm coffee massage your dried throat. But like the stench of long deceased death, the doorbell rings and ruins the moment. You eye the coffee in mug on one hand, newspaper in the other wondering, "do they even know if I'm awake? Had they seen me at the front door? "

@ANTSEMUT1 4 жыл бұрын

The crazy eyes he did at the end really sold that shit. It was fucking hilarious.

@rossmorrow3013 11 ай бұрын

I was taught by an old craftsman Organbuilder who showed me to put oil on the stone, place the blade/bevel on the stone and tilt it until I see a thin line of oil pop out, and that was my cutting edge and burr. Job done!!

@alexag1997 Жыл бұрын

As an amateur with woodworker, i typically feel overpowered with the entire arrangement kzfaq.infoUgkxrYREG3-7f1Aqk9ams3ZESRNzGnfdUtyQ . Be that as it may, this arrangements drove me through with much clarity and effortlessness woodplans. Works i now work like a genius. That is great!

@drew899 4 жыл бұрын

Can you make a video about finding wood and identifying it? Maybe “scavenger hunting” with Rex.

@RexKrueger 4 жыл бұрын

I've been meaning to for the longest time!

@ChasenR 4 жыл бұрын

I've been hoping for this since i started watching a year ago, good wood is really pricey and there is constantly trees and old wood being cut out and thrown away around town. Shame to let it all go to waste. -Edited for spelling.

@drew899 4 жыл бұрын

Chasen Wayne Beau Miles has a cool video about using wood he found on his commute to work to make a canoe paddle if you are interested.

@akesq01 3 жыл бұрын

I second the request! Wandering around the stores and scrap piles aimlessly here! Outside of pine and cedar, I have no clue!

@ziggybombers1563 3 жыл бұрын

Now that would make a great video 👍😃

@Frithgar 4 жыл бұрын

Little tip for you for beginners to free hand sharpening. Get a permanent marker (sharpie or something similar) and colour the end of the blade before sharpening. After each stage, there should be no marker left on the edge of the blade, if there is, you've missed a spot and need to go back over. Not so much an issue for plane blades and the like, but I've found it useful for carving chisels when you're sharpening rounded blades that require a lot of wrist movement to sharpen the whole thing.

@tompoynton 3 жыл бұрын

Good for Japanese kitchen knives too

@brettclark8020 3 жыл бұрын

It works best if you use a red or blue marker, instead of black. It's easier to see, especially when there's a lot of grit and swarf from the sharpening.

@FringeWizard2 3 жыл бұрын

I've tried a lot to do free hand sharpening but I have a shoulder injury and I just can't do it, I've sharpened and resharpened my knife over and over, with dull results every single time. When someone else does it they can get it sharp but I can only dull it. I hate this. :(

@danorsemen3 3 жыл бұрын

GREAT tip! Use this technique every time I strop my wood carving knives. Learned it from a Ben Orford sharpening video.

@blake102989 3 жыл бұрын

@@FringeWizard2 don't be discouraged buddy. It took me about a year to get the edge of my knives sharp. It's all about the angle, if you don't hold it at the correct angle while running it across the stone it won't make it sharp but more likely dull it. I have a bad shoulder myself and it doesn't bother me at all, it might if I were to try and sharpen somethin the size of a katana though lol. Just keep practicing on a cheap dull pocket knife the work your way up. Make sure you progress your way up with different stones though. Accusharp makes a great double sided diamond pocket stone for under $10. With it I can get my knives sharp enough to shave with.

@maradall 3 жыл бұрын

Rumaging through my Dad's old workbench, I was chuffed to find his old Stanley No. 5 plane (which I've now identified as Type 19, from 1948-61), plus a bunch of oilstones... and 3 pieces of glass with sandpaper of varying grit glued to each side! Dad passed away just over 10 years ago, and it's a few years before that, that he made his last real woodworking project piece. He was very fussy about caring for his tools, so the plane is in pretty good condition, apart from the blade being blunt. I've now pulled the plane to bits to clean it up, and have made my first attempt to sharpen the blade. The sandpaper looks more or less unusable at this point, and anyway, hard to identify the grits. But I've started to soak the sandpaper off so as to re-use the glass plates... Well, the blade is now sharper than it was - but needs a bit more work to get it back to pro condition. But for me, it's a labour of love, and I've enjoyed following the steps of this tutorial with an actual treasured tool!

@Exiledk 3 жыл бұрын

I wondered about this micro bevel business some time ago. Then I used a jig, never moved it and just sharpened a plane iron with no micro bevel. It works just fine.... I'm getting the hang of free hand now... what a relief. Thanks for the reassurance.

@jmsjms2735 4 жыл бұрын

Are you telling me my pa and grandpa were not plain ignorant for getting along with just 2 stones and a strop? Watching too many sharpening videos I now got loaded with no less than 5 stones - and the more I use them the more I feel the joke is on me. Thanks for making the world round again.

@zoutewand 3 жыл бұрын

I own 4 stones. Bought one for €30, the rest of them were free or a gift. I only use the one I bought as it has a rough and fine side. Also got a bunch of tiny stones that I use for axes and travel

@mrz80 3 жыл бұрын

@@zoutewand I keep a couple of small stones handy for doing yard tools. Some of those vines out there will dull a set of loppers pretty quickly. Few quick swipes with the little stone and we're back in business.

@jguil4d 4 жыл бұрын

I really thought you were going to say, about strops, “if there’s that much violent disagreement about which face to use, then it probably is just a matter of preference. I mean, look, nobody argues about which end of the chisel is the cutting edge, because there is a clear difference. But here? play with it and see what you like.” Left me hanging, dude.

@elund408 4 жыл бұрын

Great Video, a few things, A great honing oil is 50/50 mix 30 wt and kerosene. Oil stones when new can be used with water (add a little dish detergent) after using with oil stick with oil. If you don't have leather for a strop you can use jeans or any other hard wearing cloth or cardboard on wood. leather is traditional but other things work until you can find a scrap of leather, it is just somthing to hold the compound.

@peterstevens8401 2 жыл бұрын

"When my neighbor throws out a leather chair, I skin that thing like a buffalo." I almost died 🤣🤣🤣🤣.

@dalewysinger3077 2 жыл бұрын

Thank you for saying " the unsaid"! I have watched many of the "to the letter" sharpening videos; and wondered how I ever got a shaving edge on my blades without all that technical knowledge. Finally, someone who recognized the fact that we are not machinist, we are woodworkers.

@malletandchisel5154 Ай бұрын

Great video. Kim about 4 years into my hand tool journey. I’ve been a power tool woodworker most of my life and bought a 5 1/2 with stimulus money. I’m hooked. I sold my cabinet saw and my power jointer and my dust collector. I have several sharpening jigs and I’m partial to the easiest one, but mostly just sharpen by hand now. I really don’t notice the difference. I can still get very sharp by registering the bevel and being careful. Sharp enough to shave hair and wood.

@cooperised 4 жыл бұрын

The only justification for microbevels is that honing the edge is faster because you don't have to touch the main bevel, so there's less material to remove. But the freehand rounded bevel has exactly the same advantage. Microbevels are a solution to a problem that didn't exist before sharpening jigs appeared.

@madtitan9639 4 жыл бұрын

I had a similar thought the first time I saw Paul Sellers sharpen - his technique is ALL micro-bevel. The sharpening arguments are mostly a terminology issue.

@yannisvaroufakis9395 Жыл бұрын

Paul Sellers calls his single bevel a “macro camber”. Yes, this produces the same advantage of speed as a micro bevel. Good point. But I would imagine that it also solves the problem that freehand sharpening a micro bevel would create, that being the impossibility of reproducing the exact same angle with every freehand sharpening. Varying the microbevel angle every time would create a rounded dull edge. I suppose the macro camber would cut a completely new cutting edge every sharpening.

@taffec 3 жыл бұрын

This is the best sharpening video I've seen because it goes into every detail needed for the whole process without skipping steps. as a beginner its super helpful to get that last 20% everyone skips over that is essential to pull it all together

@tonyalways7174 Жыл бұрын

How refreshing to see someone talk common sense on sharpening. Our forebears in the hay day of fine furniture during the 17th and 18th centuries, and even in the 19th, were mostly illiterate, had no access to a ruler let alone a micrometer, and used locally hewn stones and blacksmith made tools often passed down from father to son and yet they made furniture and carvings that have lasted centuries and which still leave us staring in awe. The closer I work to how they worked the more pleasurable woodworking becomes. I have a shop full of expensive and noisy tools and machines but nothing is ever as enjoyable as using a saw, plane and chisel to make something useful.

@MaryAnnNytowl 2 жыл бұрын

LOL, when you say diamond plate, because of my background in semi trailer mechanic-ing, I think of the aluminum or steel with the diamond-ish patterning on the top, that everything from toolboxes for the sides of flatbed to the top of bumpers to give them traction ability. 😄 These are great tips! I'll definitely use them! It'll not only saves time, but money, too! Thanks a lot, Rex! ❤️❤️ Edited to add: I use that shelf liner stuff for tons of stuff, already, so that's perfect - I've already got rolls of it hanging around!

@Matt_The_Hugenot 2 жыл бұрын

Some of us don't have the hand control to sharpen freehand, one slip and the edge is ruined. I envy anyone with the skill to maintain a consistent angle without a jig or guide.

@tonyhawk1948 4 жыл бұрын

Thank you so much once again Rex! I've always used a honing guide bc I was too overwhelmed by sharpening by hand but I didn't know it wasn't that complicated.

@gamingscientist7445 4 жыл бұрын

This is the kind of no-nonsense sharpening guide for woodworkers I've been looking for. Thank You!!!

@cbdeandc 3 жыл бұрын

This is a brilliant video. I watch all these woodworker masters and realize that sharpening is the holy grail of woodworking and I beat myself for not being better at it. This video removes much of the mystery and drama. It's a keeper. Can't wait to get back to the shop and do it. Thanks

@bruceb.harrison3470 4 жыл бұрын

Rex, you are absolutely the best. Clear, smart, entertaining and just plain fun. Thank you!

@danLyoutube 4 жыл бұрын

Wow, the whole sharpening process finally all "clicked" for me. Thank you so much.

@RexKrueger 4 жыл бұрын

Great to hear!

@christopherarendt3531 4 жыл бұрын

My dad has a sharpening stone. I never watched a video about sharpening until I came to your channel, and I don't think I ever needed to. You just put oil on, move the blade around to make an angle that you think seems "sharp" and then you're good to go. It's really easy! I'm glad you're standing up to modern assumptions here!

@RexKrueger 4 жыл бұрын

Glad I could help!

@cedricBUNKERTON 3 жыл бұрын

Best sharpening video ever! My sharpening station is built, my Narex's turned into Scarex's, and my left arm is clean shaved & covered in band-aids.

@Rwjudy48 3 жыл бұрын

Really appreciate the info on oil stones. I followed your advice and bought them. I really like the results.

@juliushoffman15 4 жыл бұрын

Thank you for this video. All of my tools need sharpening, but I've thought it was complicated and expensive. I appreciate an alternative.

@GCaF 3 жыл бұрын

Dude I just finished building this (no strop yet... NO ONE is throwing leather around me now that I need it) but even without a strop I sharpened my planes to shaving quality and omg the difference!!! Thank you Rex for sharing this design!!

@groermaik 4 жыл бұрын

It's so nice to hear someone speaking english instead of "woodworkerspeak" Thank you.

@RexKrueger 4 жыл бұрын

You are welcome!

@dcolorado7483 4 жыл бұрын

I ordered off your list of the stones and compound. Received them yesterday. Sharpened a couple of planes today following the video. All came out as sharp as Rex's video advertised without the guilt of not being perfect. Tomorrow I will be working on a workbench that been begging to be built. As always, I enjoy the humor and quality of your videos.

@RexKrueger 4 жыл бұрын

Wonderful!

@paulmouradian8968 3 жыл бұрын

Rex another one of your famous videos with plenty of practical references and no nonsense advertising, I appreciate your quick wit and cut to the chase!!

@chrisgpz 4 жыл бұрын

Really appreciate you making this video. Easy to get caught up in exact science of sharpening when for me, it is not practical to spend that much time on it.

@jacobthompson1569 3 жыл бұрын

I'd been getting by with a small diamond plate and sandpaper for a couple years now and wasn't attracted to waterstones because of the need to flatten them. My framing chisels and block plane get abused daily, and spending a few minutes tuning them up on these stones and a strop at the end of the day has saved me so much time and I'm getting better results than ever.

@MichaelShimniok 2 жыл бұрын

Excellent video! I too am a big fan of Paul Sellers. Just saw the video of him sharpening free hand. I like the mindset of "I just want to get back to woodworking" versus making sharpening into some kind of crazy precision science experiment 😆 Anyway this vid will save me a lot of money and, most importantly, fretting and overthinking.

@brentnicol6391 4 жыл бұрын

Do what works for you is the best. Did woodworking at school and we never had the time to sharpen any tools because we only had 45 minute per day to build what we had to for that lesson. So we had to do what works at that moment to get it done. I still do it today. If it cuts, then carry on. If not then do it again. Muscle memory as you mentioned. Great vid and thank you.

@1Barrel2u 4 жыл бұрын

You always present interesting topics and this was certainly one of the most interesting. Sharpening methods always brings out the opinions among woodworkers. I spent nearly 40 years working as a high precision machinist and oddly enough sharpening tools is also a topic with lots of opinions among those of us who manipulate metal. Keep coming up with interesting topics. I really like your approach to woodworking.

@michaelf4619 3 жыл бұрын

This is amazing!! Thank you so much!! All these details are SO difficult to pick up as a beginner, including recommendations for the "right" kinds of stones! Thank you thank you thank you!!

@Bapuji42 3 жыл бұрын

I like this no-bs approach. Nice to hear Paul Sellars get a shoutout too.

@adammono1839 4 жыл бұрын

Great to see you're giving people the alternatives rex. Much appreciated! But I'm still using sandpaper for now...

@toonybrain 2 жыл бұрын

I always appreciate your common-sense, down-to-earth, old-time approach. Thank you.

@caseyclay5019 3 жыл бұрын

I have watched so many videos trying to understand this process better, only to be left confused on one detail or another. I just want to thank you and commend you for making the content in this video simple to understand for beginners and for taking the extra time/care to break down every minute step so to leave no viewer left wondering if they're sharpening correctly. The most valuable parts, in my opinion, are the "why's". Knowing WHY a process is done the way it is done is priceless, and that information is a top reason I subscribed. Good work! Thanks again.

@GlenfinnanForge 4 жыл бұрын

Rex, totally off topic here, but I just purchased your Joiners Bench plan bundle, and I gotta say I'm totally impressed with just how complete and detailed they are for such a good price! Completely satisfied customer here, and I'm looking forward to building this bad boy in the next few weeks. Thanks man!

@stevemaslin1003 2 жыл бұрын

Thank you so much. Only started my wood working/carving journey 2 days ago. I feel I have been struggling with no idea on sharpening. I didn't spend much on my tools but I was sure I could get them sharp with my sharpening stone. After watching your video I am happy to say I am now learning what a burr is and seeing results. You've also gained a subscriber. Thank you. :)

@ludvigtande1236 3 жыл бұрын

Rex, you convinced me. I’ve gotten better hand sharpening plane blades and chisels over the past couple of years on sand paper and cheap stones. Just purchased on amazon Dans set of 8 inch stones. Can’t wait. Cheers.

@tschallacka874 3 жыл бұрын

Love the added images, made a lot more clear

@ClintsHobbiesDIY Жыл бұрын

I just watched the two vids with Nate and this one. Thanks for teaching this old man a lot.

@BartoszBanachewicz 2 жыл бұрын

I came back to this video after a year. Back then I only owned a cheap water stone; now I have a set of extremely cheap diamond plates from our favorite web store in China, and they're quite great for the price. I got them up to 3000 grit (I know that this scale doesn't really work for diamond plates, but that's what they're labeled at) and they do the work well. Perhaps the only flaw I've noticed is that if you use water to lubricate them during use (and lift off the metal chips), those chips will rust almost immediately when left alone, so you need to wipe them clean after each use. The thin plates also require some proper support to actually keep flat, so I still use them on a piece of glass.

@mightyporky 4 жыл бұрын

Some of what I practice was learned from watching Norm, it was a ritual each Saturday. And one very important lesson was what Tommy said "Everyone is different",. from this old house. I was already making my living from woodworking long before either show was aired but watch I did because every episode had some tidbit to absorb. If you do the best you can with what you have, no one can do any better. Still practicing at 77, hopefully still learning but for damned sure, enjoying it all. Great episode Mr. Rex

@reidselby2569 3 жыл бұрын

Been looking for this vid a LONG time and found you by accident. Thank you for posting this gem of a vid !!

@lrochfort 3 жыл бұрын

Good for you. I don't believe that woodworkers hundreds of years ago who had to produce furniture at a rate of knots were fussing over composite angles and using jigs. I reckon the most important thing is going fine enough. The tip about not falling off the edge of the strop is great, too. I did that for months without realising.

@TheNockingPoint 4 жыл бұрын

@7:00 is an instant classic! And something I would do. My first hard laugh of the day. Thank you for the education and entertainment.

@RexKrueger 4 жыл бұрын

I was afraid that was creepy, even though I hoped it would be funny.

@TheCaptainmaim 4 жыл бұрын

@@RexKrueger it was funny because it was creepy!

@theeddorian 4 жыл бұрын

@@RexKrueger I laughed out loud. Regarding oil stones I sharpen my kitchen knives on them, then drizzle dish detergent on the oiled surfaces and work it in with my fingers. The detergent and oil form a soap precursor (high school chemistry has some uses) that is water soluble. It cleans the stone and removes any oil that may polymerize over time and reduce the cutting efficiency.

@mariojimenez691 4 жыл бұрын

I laughed way too hard.

@gazpal 4 жыл бұрын

@@theeddorian I do something similar, but using simple detergent and water when using my DMT plates.

@sammarcum380 3 жыл бұрын

This is the video I've been wanting to see for over a year!

@charlesrussell9312 4 жыл бұрын

Back when I started I was "taught" to freehand (more like told how to and attempted to remember days later) on a set of whetstones I picked up at an estate sale. When I began watching videos I found it weird that people were obsessed with sharpening to a specific angle.

@antonioliles5027 4 жыл бұрын

One of my first responsibilities as an apprentice was to sharpen blades and chisels. My master taught me how to hand sharpen in about 30 minutes. After that, it was my ass if the tools were not sharp. Years later, I saw all of this stuff about exact bevels and whatnot and I was very confused. I was wondering how these people got any work done by obsessing over the exact angles of their bevels so much.

@nealsterling8151 4 жыл бұрын

I never understood that obsession some ppl. seem to have. I guess they just need something to feel better than the rest, lol.

@Zonkotron 4 жыл бұрын

@@nealsterling8151 Maybe a carryover from metal cutting ? In high productivity metalworking edge geometry is insanely important to make sure you can dissipate 20 hp in the cut, get a mirror finish, not break the tool and not get a huge birds nest of scalding hot, razor sharp barbed wire like swarf - all at the SAME time.

@DavidCookeZ80 3 жыл бұрын

@@Zonkotron I must admit that having been taught how to freehand grind tool steel (that there should be some clearance, but not too much) then putting those first attempts into a shaper and taking heavy cuts into mild steel with no trouble, that the clearance for woodworking *hand* tools needed to be exactly this or that angle. I'm sure there's an optimal angle that balances the life of the edge against the finish, but if you're going to be sharpening whenever the tool feels like it's lost it's edge then the only thing you need to optimise is getting back to your project.

@vkess1 4 жыл бұрын

I’m glad you mentioned about flattening the stones. It can be surprising how fast they become concave. I flatten mine after every use, otherwise it gets to be a lot of work if you wait too long.

@BloodSprite-tan 4 жыл бұрын

it totally depends on the stone. i have some that become concave immediately, typically it's because they are softer and you're suppose to use less pressure, i would have liked to know that before i used them.

@figrollin 4 жыл бұрын

@Nevermind how unnecessarily mean.

@jimf1964 4 жыл бұрын

It doesn't require much pressure at all, for any stone. So on a soft one, it could go off flat, but every time? Something is wrong, or you're over obsessing about the stone.

@jasonmcconnehey8582 4 жыл бұрын

I have a 300/1000 trend diamond plate. Anytime I use my 8000 or up stones, I use the 300 to flatten. Takes 10 seconds literally.

@emilys3638 3 жыл бұрын

THANK YOU for presenting this approach which works much better for my particular brain setting. Too much precision and math bogs me down and prevents me from even feeling ready to begin. So honestly you had me at "freehand", and I think I'm finally ready to actually acquire a sharpening system -- as well as acquire something to sharpen, thanks to your video on which planes are most useful. Every time you write something off as "nonsense" or "unnecessary", I internally cheer, because it means that someone else cut through the clutter for me! My instincts are strongly guiding me towards starting simple and building up as I go. So all of your videos are helping me quite a bit. The visuals are incredibly useful too! I'm so excited to get into using more hand tools...

@danorsemen3 3 жыл бұрын

You sir, are my new favorite woodworking channel!

@salimufari 4 жыл бұрын

I think the curved bevel edge also helps support the edge so you are less likely to chip out the blade. The arc gives some material to transfer force deeper into the iron body. As for Camber you can see at 15:20 as Rex explains the motion how his forearms move. Then at 16:00 as he speeds up you can see that pressure change happen if you watch his arms at the top of frame and not the blade. Easy peazy.

@MatthewSherriff85 3 жыл бұрын

I got a $20 two sided oil stone and a $2 bit of leather and it's the best setup I've used yet

@jblewis1975 3 жыл бұрын

Thank you for putting out such a great, simple video on sharpening! I'm still "honing" my skills (pun intended, I'm a Dad!), so this really helped. Happy woodworking!

@artiefufkin3292 3 жыл бұрын

Excellent video. Many thanks from across the pond.

@farmerjim-fat-man-do 4 жыл бұрын

👍 👍Craftsmen got by fine for centuries without worrying about a micro-bevel on their tool. I learned to sharpen knifes, chisels and planes by feel way before you could find a jig and before the KZfaq experts decided it was a sin to hand sharpen tools. Sharp is sharp in my world. Thanks for sharing your technique.

@RexKrueger 4 жыл бұрын

Right on

@peterwooldridge7285 4 жыл бұрын

Thanks Rex, yet another video packed full of practical advice

@Gabriel72239 2 жыл бұрын

A big thanks from Brasil. Your videos helped me a lot and encouraged me to begin on hand woodworking.

@DogDog173 2 жыл бұрын

0:52 "when I first started woodworking I was broke" kind of sums me up :)

@tomim7187 3 жыл бұрын

I made Paul Sellers jig with steel diamond plates and freehand the sharpening. Works a treat. Great Video Rex 👍👍

@David-hm9ic 4 жыл бұрын

I'm happy for everyone that can sharpen without a jig. When I try to freehand, I have trouble sharpening across the entire edge evenly, I have diamond stones and 3M Microfinishing Film. I have a jig. I would not consider "throwng away" any perfectly good option. For those of us that are physically challenged when it comes to sharpening the crutches are helpful. I will continue to attempt to learn to freehand but the jig will be there to help me fix my mistakes. I also find the jig very helpful when I get a chisel that is not square. That happened recently with a new chisel of good quality. I can put a great edge on knives freehand; just not planes and chisels. Yet.

@Woodys_Workshop 3 жыл бұрын

Rex, I've used DMT diamond stones for years. I get the big ones, 10"x4". 2 will get you all the grits you need as they are double sided. X-fine/fine & course/X-course. 220/325 grit & 600/1200 grit, respectively. I also use the Norton water stones, not the double sided. They don't ware out as fast as you think if you use them correctly. My most used grits are the 4000 & 8000 grits. After 20 years the 4000 grit is about 1/2 it's original thickness. The 8000 grit is almost like new for thickness. And I sharped a lot of knives, it's kind of a small income for me. Doing knives I don't flatten them very often. In fact I haven't flattened any of them in 5 years doing just knives. Woody's Workshop

@akesq01 3 жыл бұрын

Thank you, Rex! So helpful and practical!

@paulk3232 2 жыл бұрын

Your tech is how I learned from my grandfather who was a finish carpenter. Built the same type of finish board just wish I had a place to still play with wood. Miss the smell of a work shop and just playing around with scape wood. Look a board and it tells you what it is supposed to be when you done with it. Thanks enjoy watching you do things.

@scottrowlings5345 3 жыл бұрын

Woah.....this is mind blowing! It goes against everything I’ve ever learned (and taught my students!). Very interesting!

@neilhassanali316 4 жыл бұрын

Love your no nonsense videos.

@madmanmapper 4 жыл бұрын

Hey, I like how you told me everything I needed to know in the first 2 minutes. No bullshit. I like it.

@tobin0405 4 жыл бұрын

Really good stuff Rex. Thank you.

@Klaevin 5 ай бұрын

Someone recommended using the bottom of a mug (the bit that isn't glazed) and I've been using that to sharpen my knives for a couple months, now. A diamond sharpening plate is on my wishlist

@charliesullivan7546 3 жыл бұрын

I have been doing leatherwork a long time, but I recently found something that a leather store showed me. That is if you use a little green polishing compound, your stropping will be much faster and your sharpened device will work much easier. You can also buy scraps of leather very cheap at Springfield Leather. I use this compound all the time, whenever I have to strop a blade.

@paulgagen3815 4 жыл бұрын

Hey Rex, you’ve got a GREAT way of cutting through the claptrap! Thanks

@ethanpace2225 3 жыл бұрын

I'm just getting into woodworking and have been wondering what I should do about sharpening equipment. After watching this, I grabbed an old India stone I inherited from my grandfather, used Rex's method on a chisel, and got some decent results in just a few minutes. I'd say that's pretty unbeatable.

@warpfly6318 3 жыл бұрын

Thank you really looking forward to making this jig ty Rex

@paulmaryon9088 3 жыл бұрын

Thanks Rex useful stuff stay safe and thanks for posting

@donaldtrumpshairdoo 4 жыл бұрын

Nice input to all the sharpening videos out there. I’ve been sharpening edged tools for both my professional work life as a carpenter and my hobby wood work for some time now. I use a variety of different sharpening methods. I wouldn’t discount my sandpaper just yet. It’s super useful for sharpening any curved edges like spoon knives, gouges, adzes and the like. It’s also great for nasty jobs, like getting gunk off of your sharp tools (and not ruining your whetstone in the process). I keep a set of straight beveled chisels for fine carpentry work, sharpened with the Richard Kell jigs, on a combination of first a dmt “stone” then different ceramics to 8000 grit - with a bit of stropping fro that last finish. All the chisels have the same bevel, approximately 27 degrees, that way any bevel down work feels the same across the set, increasing familiarity. Why 27? Idk, feels like a good compromise between sharpness and edge retention. They get used in anything from the softest pine to seasoned oak. I bet quality of steel has a lot to say in that regard. What you, Rex, create is a flat/ convex edge, I use that geometry all the time. For carving axes with inferior steel, for instance, I only ever meet the wood with one side of my axe while carving anyway. Also for many of my carbon steel carving knives. A flat and a curved side is super useful! Besides better edge retention, your knife will work a little bit like a Yakut knife, and that’s not bad at all :).

@siriusbusiness2351 4 жыл бұрын

Hey Rex, thank you for taking the time to make all of these amazing videos. I just picked up an antique draw knife, still very sharp. I've been wondering if you use those at all. If so, can you do a video on how to use it and sharpen it? I have a few stumps of oak and hickory I've been wanting to test it out on so I can have some wood to work with.

@SphinxMTN 3 жыл бұрын

Thank you for this. I think you just saved me a ton of money and headaches.

@contra81 4 жыл бұрын

I agree w alot of others on here, good on ya for showing microbevels etc arent as important as one thinks. Ive been freehanding for about a year now, and havent seen a problem. What works best for me is something i picked up from a vid on YT, some guy showing how he sharpens chisels. He said to look at the blade edge, when you press it flat on the stone and see the water/oil thats right at the edge of the blade edge get pushed out, youre at the right angle. That has worked for me ever since. Not sure if that makes any sense, hopefully someone understands that and helps them.

@johnbarney5787 3 жыл бұрын

Thanks for the great, informative video Rex. I just discovered your channel, this video, today. You got a new subscriber! Great job!

@lwj2 3 жыл бұрын

When I learnt to sharpen, jigs were something machinists used to sharpen paper trimmers. I was taught not to roll my blade, obviously it works for you, but in the sixties it was forbidden. Here on the U.S. East Coast, diamond sharpeners are about $30US for a 2x6 stone; I use tap water and a drop of dish liquid soap on mine. Great presentation, right to the basics. And regarding kitchen knives: 8, 10, 12 inch chef knives need a working edge, not a razor edge, when dicing or chopping you'll destroy a razor edge in seconds.

4 жыл бұрын

It's always a pleasure watching your videos :) Thanks for sharing :)

@mikec2810 4 жыл бұрын

Great video Rex! Thank you for sharing your knowledge with us!

@RexKrueger 4 жыл бұрын

Any time

@yssing 3 жыл бұрын

That grey and white stone! Looks so great.

@Critter145 3 жыл бұрын

You take the time consuming mystery/BS out of the process. God bless you, Sir.

@tonwanten6417 3 жыл бұрын

Thank you, leaning every day! Very helpful.

@itonuoro3813 6 ай бұрын

Thank you very much for this video. It helped me a lot!

@dondawson7409 4 жыл бұрын

Another wonderful video Rex, keep it up mate

@zacharylindahl 3 жыл бұрын

holy crap I've bee putting the blades in my planes backwards this whole time. I wondered how they cut so easily for you

@eddiefrie8968 4 жыл бұрын

Another method to avoid the bur (aka rollover) is to only push the blade on the stone. The rollover bur is from scraping the metal off the edge of the blade, but if you push the blade only, you avoid this mostly. You can still get this bur, but usually on softer blades. Of course you have to only pull on the strop but you are only polishing at that point. A stroke compromise is to push harder forward and let off on the backstroke so you keep the angle form. Thanks, Rex these are great videos keep them coming.

@ChristiannTyler 2 жыл бұрын

I just like the micro-bevel for honing, I can get a dull edge back to perfection in just a few seconds focusing on that last bit of steel. For me sharpening the whole primary bevel just means more time sharpening, more time for a mistake. I love that tiny polished strip along my edge. To each is own 🤷🏻‍♂️

@piercekimmerly 3 жыл бұрын

I like it. I hand sharpen my drill bits. It takes a small amount of practice but it's very easy. You can make it very aggressive or not much at all, for whatever application you wish.

@jennessalynam7682 3 жыл бұрын

Love this video and how you have explained with easy to understand details. Especially the part about the bevel and the fact that it's not what does the cutting but the back of the blade does. Ps, you have gorgeous eyes 😉

@TheFireMage100 4 жыл бұрын

Been watching your videos for a while despite having essentially a storage cupboard too full of other junk I cant get rid of to do what woodwork I can. Yesterday found a random sharpening stone, came back inside and found you made this video. No idea what grit it is but with this video I at least got my tools to a point that they bit into my thumbnail and dont need a sledgehammer to pair a surface. Thanks Rex!

@RexKrueger 4 жыл бұрын

That is awesome!

@nightcatarts 4 жыл бұрын

I use a diamond & water stone & then a strop because it's just a lot less messy than oil. Keeping the water stone in a tupperware box works really well, & (even though it may slightly age the stone) I add just a few drops of lemon juice to keep the standing water from going nasty. Recently, I've started just putting the diamond plate in there too since that also needs a little water, & it seems to be working out well so far. Easy to store & access, no mess.