Reze Demon Form - ChainsawMan Cosplay Tutorial

Рет қаралды 73,792

2 жыл бұрын

hello everyone this is gonna be the first of the two Chainsaw Man Tutorials I'll be posting, Denji's tutorial should be uploaded by the end of September hopefully!
Meanwhile I hope you'll enjoy Reze's one!
=== Materials List ===
• Styrene Foam
• 6mm Eva Foam
• 3mm Eva Foam
• Black Top from Amazon
• Black Lycra gloves from Amazon
• Black Cotton for apron
• Black Plastic buckle for apron
• 20mm PVC Tube for dynamite
• Brown Packaging paper for dynamite
• Black Elastic for dynamite
• Neodymium Magnets
• Black Ribbon for Ribbon
• Black socks from Amazon
• Black Balaclava from Amazon
=== Consumables List ===
• PVA Glue
• Hot Glue
• Black Acrylic Spray Paint
• Silver paint for weathering
• White paint for teeth
• Black Silicone for organic Veins on top and gloves
• Sand Paper
• Black Thread for sewing
=== Tools List ===
• Box Cutter
• Hot Glue Gun
• Airbrush
• Sewing machine
• Brush to apply PVA glue

Пікірлер: 110

@eshasingh8145 2 жыл бұрын

absolutly amazing, and sure that this video is going to blow up after the anime release. all the best. just a small suggestion, maybe put the product list in the description, i couldnt understand what that black tube was, just a suggestion, beautiful video.

@matsudaindustries2530 2 жыл бұрын

Done 😸

@lilhellish4835 2 жыл бұрын

aaaaa thank you for making this tutorial!! i’ve been wanting to do a bomb devil cosplay since i saw her panel in the manga and your visuals helped me finally figure out how to assemble my design!! this is such great work and it turned out perfect! thank you again for posting this, i can’t wait to make my own🥳🥰

@sweetnightmares6996 Жыл бұрын

AAAAA Thank you so much for posting this tutorial, I was really thinking the hamlet was so difficult to make and I couldn't figure out an idea of how to make it, you made it look so easy (but I know it takes some effort). Now I really wanna give it a try! You did amazing!

@necoarc4097 Жыл бұрын

i followed this video for the head and it turned out awesome! i used a sheet of one way polarized plastic in the circle indent on the front of the bomb so i could see out of that ring with out it being noticeable. thx so much for the tutorial!

@user-bq3nz9lj2k 2 жыл бұрын

That looks so cool! I like the shine of the organic pieces. It males it look like it's sort of slimey and more like flesh. Great job!

@realisticangel4447 11 ай бұрын

Love this! How long did you cut the pvc pipe pieces or did you just eyeball it?

@lostinfantasy2489 2 жыл бұрын

looks amazing!

@kittycatgirl1139 2 жыл бұрын

Definitely going to make this in the future!

@jellyybabyy1029 2 жыл бұрын

OH MY GOD ITS AMAZING! I’ve been looking for csm cosplay tutorials everywhere. This is amazing. Would you at any point consider making quanxi in her devil form or aki gun devil

@francismartinez7992 Жыл бұрын

Aaa this is amazing, I’ve been working on my bomb devil cosplay for a while but still couldn’t figure out how to do the head and this helped a lot!! Thank you!!!

@actionman9451 Жыл бұрын

This is amazing bravo 👏

@britneybij3997 Жыл бұрын

I'm gonna get the helmet on Etsy but I'm definitely gonna use your tutorial for the clothes. Planning on going as her for Halloween and I'll keep the cosplay for any Cons I might go to in the future

@y4ngers 2 жыл бұрын

this is epic

@dxeeb.cosplays9278 Жыл бұрын

i used this video to help me out with making my own Reze Helmet and i lt helped greatly, i received a lot compliments at the convention on my cosplay which i was really happy about

@marliyana9706 Жыл бұрын

how did u walk around with this helmet on?

@k7cos Жыл бұрын

Hi! First of all, love your work! I started trying to make my own bomb devil cosplay today, with the help of your video. I'm just a bit stuck on how to attach the jaw 😅 Do you have any tips on what would be the best way to do it? Thanks in advance!

@manlyanime 2 жыл бұрын

the shop teacher in my head is screaming, asking why are you cutting toward your self be careful that blade is no joke be careful. great tutorial tho excited for the anime soon

@kirbyfan420 2 жыл бұрын

amazing work! is the jaw also attached by magnets? and for the neck piece, could i ask how you made that attach to the head or is it a separate piece? again this cosplay is outstanding!!

@matsudaindustries2530 2 жыл бұрын

On the first version the jaw was attached to a balaclava ( the idea was to move the jaw as the cosplayer spoke, but the balaclava revealed to be way to thin and the jaw was just hanging loose, it looked like the Bomb Demon had a permanent dumb face on it, so I had to lock it in place with some hot glue). As for the neck, is just a piece of 3mm Eva foam around the balaclava's neck, is not very visible nor very interesting to show in camera, so that's the reason I didn't show it; ( on Denji's tutorial I'll show more about the neck thingy )

@Elena-ty8xv Жыл бұрын

Lavoro incredibile! Quanto lunghi sono i tubi di pvc che hai usato per fare la dinamite??

@aurawardhani6542 Жыл бұрын

So amazing! Thank you so much for the tutorial I'm planning to cosplay as the bomb devil for a cosplay contest, silly question but can you see with the helmet on?

@matsudaindustries2530 Жыл бұрын

Not very well but it can be improved by making many small holes in the nose section, otherwise from the mouth you have at least some clear view of where are you walking

@maddiedoesart4379 Жыл бұрын

Do you think this would work with just eva foam, instead of using styrene for the base?

@lindsayj.7926 2 жыл бұрын

this is amazing! how are they able to see out of the helmet? through the teeth?

@matsudaindustries2530 2 жыл бұрын

Yes that's it! Visibility is very reduced and you can only see through the gaps in the teeth, so it's more a photoshoot cosplay rather than a Con Cosplay ( we did bring it to a con but you had to walk with the front piece opened up and wear it quickly for photos )

@pedrinn8961 Жыл бұрын

0:37 goddamn bro

@saphireshare3979 Жыл бұрын

Also how did you accurately measure your head onto paper?

@penga3122 2 жыл бұрын

How much were the foam boards/where did you get them?

@alexiaistrate2581 Жыл бұрын

The cosplay is absolutely amazing.I am planning on following this tutorial but i don t know how much styrene foam should i buy

@matsudaindustries2530 Жыл бұрын

I did use a single 150x50 cm (60x20 inches ) sheet and it was more than enough

@justchiaki1899 Жыл бұрын

this is a great tutorial, but can i get the link to the polystyrene that you used? i tried to order one and i got styrofoam

@aiyanders 2 жыл бұрын

i loved the outcome of the tutorial! i was wondering how much were all the materials? i would love to use this for a cosplay at anime expo!

@matsudaindustries2530 2 жыл бұрын

Depends greatly upon the fact if you own all the tools or not, anyways here's a list: Tools Box cutter and blades - 2€ Hot glue gun and glue - 6€ Silicone gun - 2€ Airbrush - 50€ Sandpaper - 2€ Items - Polystyrene - 5€ PVA glue - 2€ Black spray paint - 3€ Airbrush paints - 10€ Magnets - 3€ Foam - 3€ PVC tubes - 2€ Elastic bands - 2€ Packaging tape - 2€ Black cloth fabric - 5€ Gloves - 10€ Silicone tubes (X3 ) 10€ Balaclava - 5€ Clothing and tools aside, is more or less 70€ in items

@stuff8429 Жыл бұрын

0:38 STYOP RIGHT THEYRE

@valletta9351 Жыл бұрын

Question for anyone who made the cosplay: How do you see out of it?

@Wow..... 9 ай бұрын

That’s also my question-

@matsudaindustries2530 9 ай бұрын

There are holes from the mouth where you can see at least where you are walking, it was designed more like a photoset cosplay rather than a con cosplay. You could also add a hole and mesh in the nose of the bomb to have better visibility tho

@hinatax1846 Жыл бұрын

How long were the dynamite sticks?

@carlagianna1730 2 жыл бұрын

where di you buy Eva foam?

@sergiovenegasovalle634 Жыл бұрын

Hola buenas de que largo se debe cortar el pvc de 20mm para la dinamita

@vanessamalato2188 2 жыл бұрын

Veramente figo, anche i pezzi appuntiti con l’eva foam sono stati ricoperti di colla vinilica prima della pittura?

@matsudaindustries2530 2 жыл бұрын

Si assolutamente perché essendo l'EVA Foam poroso, assorbe la vernice come una spugna e non rimane il colore. La colla vinilica praticamente riempie questi pori

@Jeakun23 Жыл бұрын

Can I replace this with EVA foam instead? Also, ks styrene and styrofoam the same?

@faithkurtz1656 2 жыл бұрын

Hi Matsuda! I absolutely love this project and I'm hoping to make one myself. What was the overall time took to make the helmet? Would I be okay getting away with hand painting the helmet?

@matsudaindustries2530 2 жыл бұрын

Hey there, thank you a lot, it took me around 4 to 5 days approx, including the time to let the glue and paint dry. As for the painting it's really up to you, works fine with airbrush, spray cans and normal brushes, just keep in mind that depending on the way you will be going to paint it, in this case a normal brush, it will probably leave brush marks after drying, so try to use a slightly diluted paint and a very fine brush ( it will probably require more passes because of the diluted paint, but at least it won't leave brush marks) Hope this answers your questions, if you have more just ask I am here for you

@faithkurtz1656 2 жыл бұрын

@@matsudaindustries2530 thank you so much for the reply! It absolutely did help 😄 now that I've had the time to think more on what I'll be using, I think the spray paint will definitely be more beneficial. I can always touch up if need be! I noticed in another comment that you mentioned the visibility is quite low while wearing the helmet, could I create more visibility if I make the teeth smaller and sharper? I really appreciate your advice and time! Thank you again 🙏

@lksoax 2 жыл бұрын

Amazing!!! Do u sell it?

@rejuso 2 жыл бұрын

Can you guys please make one for gun fiend aki hayakawa??

@spageeti2691 2 жыл бұрын

were the pvc pipes heavy? I’m wearing mine to a con and the apron is the only part I’m stuck on. I bought one foam dowel but it’s crazy expensive and didn’t make enough sticks.

@matsudaindustries2530 2 жыл бұрын

I had the exact same problem and yes, they are kinda heavy and a bit tricky sometimes to walk around. I thought the same thing about the foam dowel and figured out the best and cost effective solution was to make the TNT tubes out of rolled paper, wrapped around the PVC tube as a mold to give it the exact shape and then remove the PVC tube; should have enough strength by itself reducing greatly the weight. Let me know if you manage to do it, and what solution did you adopt.

@EatMySweat Жыл бұрын

How do you see?

@saphireshare3979 Жыл бұрын

How thick was your styrofoam? Thank you so much for the tutorial!

@belluna_meow8594 Жыл бұрын

40mm ~ 4cm

@ibeancookie6664 2 жыл бұрын

Where did you find the polystyrene foam? I’ve been looking but I can’t find exactly what I need

@matsudaindustries2530 2 жыл бұрын

In most home Depot/ hardware stores, it's a common insulation material used in home construction, very cheap as well, a whole 1mtx0.5mt was 5€ bu it depends on thickness. Keep in mind that this is different from the much more common polystyrene, which is made of lots of "bubbles" and it definitely won't work as well

@queenpablo2614 Жыл бұрын

Hey I would like your help what dims do you need for like measuring your head I'm going to be 3d printing the head so I would have a general idea.

@matsudaindustries2530 Жыл бұрын

For 3d printing i suggest 3D scanning using your smartphone, there are plenty apps and tutorials showing how to do it. Otherwise you can do it traditionally using a tailor's meter and calculating the circumstances of your head ( will take much longer and won't be as precise tho)

@ecto.astronomer6702 Жыл бұрын

Currently doing the apron for a con i have this weekend, but i’m trying to figure out how you managed to attach the apron on the person without breaking the cloth/waist belt since the pvc tubes are pretty heavy.

@matsudaindustries2530 Жыл бұрын

In fact yes, they are kinda heavy and if I had to redo it today I would make it in EVA Foam or something similar. The apron was attached to the waist of the person simply with a "belt" or rather ribbon made from the same cloth as the apron base, and tied to the back. It does hold but the weight drags it down a bit and movement is kinda slow and uncomfortable

@ecto.astronomer6702 Жыл бұрын

@@matsudaindustries2530 do you think the PVC Tube design could hold out walking around in a 12hr con? Or should i just redo the tubes with foam instead?

@matsudaindustries2530 Жыл бұрын

They do hold, I have mine and is still infact, never had issues with the tubes apart the fact they are slightly uncomfortable when walking.

@matsudaindustries2530 Жыл бұрын

I suggest tho bringing with you a stick of hot glue and a lighter for emergency repairs in case something wasn't properly glued or someone bumps into you and breaks anything

@ecto.astronomer6702 Жыл бұрын

@@matsudaindustries2530 alrighty! Thank you so much really!! This put me more at ease for this weekend. 🤍🤍

@HenshinmanX Жыл бұрын

By any chance do you have the pattern? It'll be helpful if you have

@yumma63 Жыл бұрын

Soy de Chile, alguien sabe como se llama el material que usaron para la base?? :(

@heqvenlyrosie Жыл бұрын

Are the foam disks supposed to be so big? i'm currently making the bomb head but i feel like i already messed up cause the disks are way too big already :(

@matsudaindustries2530 Жыл бұрын

If you thrust the process there's nothing to be worried about, just make sure the measurements are right and always double check ( measure twice cut once ) It happens a lot to me as well, and some components look bigger/smaller, but it makes sense in the end

@gabrielalunaluna4140 2 жыл бұрын

Could you provide the templates please?

@claudiasantiago3248 2 жыл бұрын

does it matter if its 40mm foam or something cause i cant find 40 mm stryofoam

@matsudaindustries2530 2 жыл бұрын

Thickness isn't really a matter, if it's thinner you'll need to add more layers, if it's thicker you'll need less. You can use any material you like, but styrofoam is very light and very easy to work with

@ebonyrowe3 Жыл бұрын

0:38 anybody else see that?

@mirage866 7 ай бұрын

Bro thought he could sneak one in

@maxtherrien8397 2 жыл бұрын

How many tubes of that silicone did you have to use?

@matsudaindustries2530 2 жыл бұрын

I've used a total of 2 and a half

@maxtherrien8397 2 жыл бұрын

@@matsudaindustries2530 Good to know. What was the specific silicone you used if you don't mind me asking

@matsudaindustries2530 2 жыл бұрын

Just common acetic silicone, just black in color

@ky0ko51 2 жыл бұрын

Al posto del Eva foam può andare bene usare il polistirene sempre da 40 mm?

@matsudaindustries2530 2 жыл бұрын

Si, ma tieni presente che il poliestere è molto piu fragile e poco elastico rispetto all'EVA Foam, motivo per cui le alette sono state fatte in foam anziché poliestere

@pelatozzomalefico1456 Жыл бұрын

La mascella sotto poi dove va attaccata di preciso?

@sartailustra3528 2 жыл бұрын

I have a question, can you see it with the mask on? I want to do it but I have that question, and I need to know, if you could answer me I would appreciate it.

@matsudaindustries2530 2 жыл бұрын

Not quite unfortunately, you can barely see from the mouth aperture. You could make some holes in the front to help you see better, at the expense of the looks, so it's definitely more of a Photoshoot cosplay rather than a Con cosplay

@whizxcoffee Жыл бұрын

@chyrains Жыл бұрын

can you make a shark devil mask, please? I really need how to make it, I can't find anywhere how to make it, there is a cosplayer who is in the same country as me but he doesn't respond to my response about asking how to make the mask, I'm very sad even though I need a tutorial for cosplay :(

@livia2066 Жыл бұрын

how thick is the styrofoam?

@matsudaindustries2530 Жыл бұрын

40 mm ( 1.574 inches)

@daevld Жыл бұрын

6:08 literally me

@matsudaindustries2530 Жыл бұрын

NNN Is almost over

@AFunnyDog69420 Жыл бұрын

0:38 BRO IS THAT AN R34???

@a.loucadosgatosb1506 Жыл бұрын

Será que dá pra fazer de isopor?

@miiaatzs4524 Жыл бұрын

acho que o isopor não seria tão flexível, eu queria muito fazer mas mano, não entendi nada

@ampushade8809 2 жыл бұрын

0:38 hmmm Hmmm HMMM

@user-rj2jx8sh9q 2 жыл бұрын

it's for reference I swear

@astraynasuha4314 Жыл бұрын

Wait... That's bomb head no hole to look out?

@matsudaindustries2530 Жыл бұрын

Unfortunately at the time it was only a photoset cosplay, you could see where you were walking but a complete vision of the surroundings wasn't a priority at the time ( i didn't want to ruin the looks with holes ) I did see other cosplayers solution for this problem and some are very smart in hiding the holes for the eyes ( I saw someone making the very tip section detachable with magnets, allowing for a quick don when needed for pictures, and a quick removal when you needed to move around, It basically had no holes at all while af the same time had a very large hole for visibility. Another solution would be tho make the tip dotted with tiny holes so you can see and kinda retain the shape while being comfortable seeing; I've seen this solution on AliExpress

@astraynasuha4314 Жыл бұрын

@@matsudaindustries2530 thx for the information, sir

@02d37 Жыл бұрын

Pliss next projek katana man and squat party devil human makiman

@HyDerosesakara Жыл бұрын

What that bomb head do?

@kyoko6178 2 жыл бұрын

Potresti mandare il link del Eva foam perché ho controllato anche su eBay ma non trovo nulla

@kyoko6178 2 жыл бұрын

Mi servirebbe per il Rimini comics

@matsudaindustries2530 2 жыл бұрын

www.ebay.it/itm/Eva-Foam-nero-per-Cosplay-Hobby-ecc-/132999760302?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=724-127637-2357-0

@matsudaindustries2530 2 жыл бұрын

Questo è l'esatto link da dove lo presi io

@daevld Жыл бұрын

0:38 hello?

@carlagianna1730 2 жыл бұрын

non riesco a trovare l'eva foam così grossa dove si può acquistare?? mi servirebbe urgente grazie💗

@matsudaindustries2530 2 жыл бұрын

Lo puoi trovare sia su Amazon che eBay, oltre a negozi online specializzati. Io li comprai su eBay, che a differenza di Amazon offre più scelta di spessori, se ti serve urgentemente con Amazon prime puoi farli arrivare domani stesso

@carlagianna1730 2 жыл бұрын

grazie mille