RFI In the Shack (

No video

RFI In the Shack (

Рет қаралды 4,425

Күн бұрын

Steve, WB7DND, lives in a apartment building and he is having problems with his loop antenna. He is asking why is his antenna so unstable on 15 and 17 meters. Watch to learn more of his other problems and what is causing it.
Subscribe: / davecasler .
Giveaway Info: dcasler.com/giv...
Edited and Videographed by Aidan Jakeman
To learn more about me, visit: dcasler.com/home/
To support my channel financially: dcasler.com/su... (offers several options)
To pose an Ask Dave question: www.dcasler.com... or www.ke0og.net/a...
Theme music is "Sour Tennessee Red," by John Deley and the 41 Players, courtesy KZfaq Music Library. You can listen to the entire song here: • Sour Tennessee Red - J...
I use drawings from OpenClipArt.org, including the "walking man"
Technician training videos, see www.ke0og.net/t...
General training videos, see www.ke0og.net/g...
Amateur Extra training videos, see www.ke0og.net/e...
Thanks to my sweet wife, Loretta, KBØVWW, for both audio and video assistance! (Her website is www.aldea-art.com.)
My primary website: www.dcasler.com
The ham radio part of my website (direct link): www.ke0og.net
My publishing website: www.mtsneffelsp..., where you can find my fantasy and science fiction books.
My Amazon author page, which lists my print and Kindle books: www.amazon.com/....
Twitter: @dcasler

Пікірлер: 10

@lyfandeth Жыл бұрын

Dave, if the aluminum foil works, a longer term more aesthetic solution is to use mirrored vinyl window applique. Inexpensive, just looks like a mirrored window in the daylight. And having tried to work through several large office windows with that stuff, it is damn near radio opaque, so it is blocking/ reflecting RF very nicely. FWIW. Water is the only "adhesive" used. No mess to remove it, just moisten it again.

@AC3HT Жыл бұрын

I appreciate all of your videos, Dave. Always interesting and informative. 73, AC3HT

@rogerlafrance6355 Жыл бұрын

Aluminum foil on a concrete floor and covered with a carpet will capacity couple into the rebar and the concrete, which is also an RF conductor. AC conduit boxes are also bonded to the steel frame and should be tied in. Antennas and modern electronics need to be kept as far apart as possible, gone are the days you could light a florescent lamp in the shack. Best practice is to do all tuning at the antenna, an ATU being a good solution. A 17 foot telescopic whip, tilted out works well with it.

@glenmartin2437 Жыл бұрын

Thanks again, Dave. N0QFT

@janvelter3253 Жыл бұрын

I think a CMC or Common Mode Choke filter will help him a lot allready to get rid of his RFI problem. It's not expensive ... and the easiest way todo it ;) 73

@mcconja Жыл бұрын

I had a ground wire break in my mic cable once. It definitely made a mess of things.

@kenwezeman7827 Жыл бұрын

The hamstick needs a "counterpoise." It won't work very well by itself.

@sincerelyyours7538 Жыл бұрын

That's good to know that aluminum foil will reflect RF energy. My shack and antenna balcony (currently under construction), are also on the 2nd floor but the walls of the house are covered with a 1 inch thick brick facade. Under the bricks are sheet aluminum panels shaped a bit like regular aluminum siding but they are only there to hold up the bricks. My 40/15 meter dipole antenna, once I finish erecting it, will be 3 meters away from my rig (and me) which is just close enough to give me some health-related RF proximity concerns. Does this mean that my house and shack, with its brick/sheet aluminum walls, will reflect enough RF energy away to protect me from excessive RF exposure?