*ROTATE* *ATTACH* *ATTACH* *ROTATE*

Take a shot for every time he says rotate and/or adjust

You messed up the knee transformation. You're supposed to pull down the big back flap thing until the psychoframe part slides up.

the problem with the RG Zeta is that it transforms from a humanoid shape into a plane shaped-thing, the Unicorn is just a humanoid that turns into a more taller & bulkier humanoid.

I love this kind of review . Realistic , goes straight to the point . Thanks !

I heard from my friends that the frame varies in tightness.Some are too tight and some are just right, but never heard of it being loose. Then again some people don't '"excersice the frame before build anyways.

unicorn mode is my favorite mode

I am glad you made that video

Man your literally making the transformation complicated than it should be and its not fragile if you build it right you can actually play with it without braking the kit like me 😁

Open... Shit... i said the same thing hahaha

Ordered this last night. Waiting for it come now

The Arms loosen up with time, so they wont become an issue after a while.

I built the Banshee version after hearing the praise people threw at this thing. The Unicorn is one of my favorite designs, so I was hyped to build it. I got to the arms, and the frame completely snapped on me when I was trying to loosen up the joints. I applied a little bit of pressure to the shoulder joint and the upper arm connection snapped immediately. Luckily I could glue it. My next issue is the thigh construction. Any kind of rotation or movement causes the transformation gimmick pieces to pop off. It looks fantastic, and the yellow inner frame is sick, but as an avid RG collector and builder, I'm still slightly pissed at the arm snapping so easily. 6/10

I love this kit. The unicorn gundam is my favorite mobile suit design and the rg was probably the most fun for me to build. Yea, some spots like the shoulder are SCARY tight, but it's not too hard to loosen them up. Definitely worth it though

The foil sticker looks...off. I think the painted one you did looks much better.

The gap in the torso isn’t an issue, it’s something I encountered too by playing with the torso. If it’s bothering you, just push the upper torso towards the lower torso, and that gap will go away

Awesome Review ^^ nice Transformation sequence :D

I actually broke the L-shaped piece that conects the arm to the torso and it was really hard to fix it. My advice is to try to loosen up the joints in the arm with dish soap, but BEFORE assembling the chest and arms, because it will be very dificult to dissasemble the arm from the torso after it's assembled.

Jobby-san?

Mines is coming next week and I'm excited.

I'm new to seeing these models, and I am in awe at how the sheer detail confuses my sense of scale. This thing looks massive but your thumb dwarfs it!

It was cool when you Transfarm it

Just got this for alChristmas. So hyped

*A Jesta A Jesta rotate rotate A Jesta*

It looks good. Mine is on the way. Thanks for the review.(Banshee,Phoenix and green frame. Shut up and take my money!)

Rotate Open Attach *say something snappy *rinse and repeat

I've played around with my RG Unicorn ALOT switching between Destroy Mode and Unicorn Mode in various poses and no problems whatsoever, so I don't get people who break theirs.

S W I V E L H E R E

You spray that with locitite silicone spray

are the nub marks in this kit undergated? because I'm planning to buy in the near future

Mine also *had* that torso gap lol.

R o W t A y T

I remember I had this guy and somehow broke the hip joint, Then the right shoulder broke, And I was so confused since it was my first RG, And now I know why

SWIVEL HE MUST HAVE JOINED US

Great review

The waist going up that much is normal mine does it too i think its to give it a taller look or to make articulation there easier

Might get one of this someday....

How complex is the build

my rg unicorns arm joint is really tight, as for the neck joint i extended by adding more flat plastic then drilled a whole through it be carefull not to widen it.

cant wait for the banshee

Mine doesn't seem too tight. It is tighter than your average RG, but not by much. Use will loosen the joints a bit (which I did, it's just too cool to not play with)

Can i have this as a beginners RG?

Is a advance good tech of gunpla. it also was a nightmare transform gunpla.

your review made me want to buy this now hahahahahaha

This was my first RG And then I broke the hip joint, then the shoulder broke

I broke both shoulder chest joint

Can you use a hg banshee norn with the weapons of the original banshee combine pls ?

I actually wanted to get this But seeing how good the ZZ Ver.Ka is, I might have to ditch this lol

Ajest!!!

Which one is better unicorn? Rg or mg?

Good review

i painted both v fins look way better the the sticker

Hold up, where'd you find that RG version with the trans-green internals? Asking because I've been looking for one with green internals for a little bit now... Also, are parts swappable with the RG 1/144 Banshee? I have both the Unicorn and Banshee on order in the same scale, and am hoping to make a "custom" Gundam of sorts using pieces from both kits.

The forearm transformation is pretty much effortless for me, once I unlock it. My problem are raising the thighs

I don't know about this, but I broke a part of the MG Unicorn while transforming. I'm now pretty scared of transforming pretty much anything now... So I don't know about getting this

hey, i just started to repaint one of my kit but a few parts of it got a little bit more layers of paint than the others got a tip on how to fix it?

Is it okay to paint this with a spray can

Jezzzzzzzz

Your review is way more detailed and not boring to watch than zakuarilus channel

that gaping hole can be fixed by pushing it up

Channel 2s line Every gunpla hand ever

I literally just bought this and it’ll be my first gundam ever so do you have any tips on putting it together?

did u have trouble with skirt armor? mine is a little loose

So is this your kit of the year so far or would that still go to HG Barzam or GM Sniper II? I personally have yet to finish any 2017 kits (except for Providence Gundam), and I got HG Zeta, Efreet Schneid, Hamma Hamma and Dragon Momoko Testament Gundam on my backlog...

Rotate, rotate, rotate

Say what you will about all the unicorn kits but in terms of how to handle the transformation there's next to nothing new in all my years of unicorns. Two going on 3 PGs, numerous MGs including the first v.ka, ms cage hd color, titanium finish etc and always I had to do the same shit with pins etc. You even get TWO in the pgs and if you buy the LED kit seperate it comes with a part puller

Open open something open open something open open

i just destroyed the right arm when i rotated it damn

a jest!

Yeah.....I'll just stick to Destroy mode.

Wait was that a green phyco frame rg unicorn

The stickers look like shit on the v fin gold gundam marker highly recommended

You are so wrong if you wanna transform the kneee you just have to slide down the thruster in the leg

Is this a good kit to throw on a bag and take with me lmaooo Honestly tho, can I do that?

2:32 SHIT Lol

ROTACH

*_Open open remove rotate attach attach rotate remove rotate remove remove_*

lol thats alot of transformation... i prefer destroy mode...

rotate extend attach LOL

Remove remove x999

All the commenting you did while doing the transformation was annoying AF! No need for all the rotate, swivel, attach, remove could have been left out & it would have made this video watchable.

I don't like the joints. I prefer pc joints

Adjust Rotate Adjust Shit

Too fragile

WANNA BE JOBBY AND MEDS😅