RGBW LED Tape & Fabric Church Stage Design Idea

Рет қаралды 126,425

3 жыл бұрын

In this episode, I am showing you how I take by stage design concept and turn it into a reality. It's a lot of work to plan a project of this size but it can be done and you can do it too. Make a plan, put it on paper and get to work. The gospel of Jesus is not contained in these four walls but it's an honor to make the place we assemble to worship our Lord and Savior a beautiful place.
-Thank you for watching. Please SUBSCRIBE and ring the bell to be updated when new content is released.
___________________
SPONSOR: www.churchmotiongraphics.com/
___________________
Products We Used to Make This Design
-RGBW LED Tape (Black): amzn.to/3firOgR
-Gorrilla Glue Clear: amzn.to/3bQLZ3E
-DMX 32ch Decoder: amzn.to/3oOS5GF
-Decoder Power Supply: amzn.to/3wu6DhI
-Shrink Solder Connectors: amzn.to/3yuOiTs
-Heat Gun: amzn.to/3hQNKBF
-Fabric: www.rosebrand.com/product2842...
-Air Staple Gun: amzn.to/3oUIdeQ
-This is the stapler I use but any will work well.
-My Favorite Work Gloves: amzn.to/3feFhq6
-Extension Wire: 18/5 Solid Jacketed Sprinkler Wire (By-the-Foot) www.lowes.com/pd/Southwire-18...
____________________
* NEW WLH MERCH*
CHECK OUT OUR MERCH STORE: worshipleaderhangout-2.creato...
____________________
WE ARE KINDA SOCIAL
Facebook: / worshipleade. .
Instagram: / worshipleaderhangout
Web: www.worshipleaderhangout.com
____________________
JOIN OUR FACEBOOK GROUP: / 159676088077343
____________________
Most product links are affiliate links.
KEYBOARD: amzn.to/3o6jYd3
MY CAMERA GEAR
- HDMI ENDOCDER CamLink 4k: amzn.to/3w2AuxH
- EOS R (Chads Cameras): amzn.to/3o48XZI
- Lens: 35mm Macro RF: amzn.to/3tA0yOT
- Lens: 24-105mm RF: amzn.to/2SmdsR1
- 80d (Davin's Cameras): amzn.to/2o7Hds9
- Lens: 35mm EF: amzn.to/2KgzWM8
- Lens 17-55mm EF : amzn.to/2DrQVLs
- ND FILTER: amzn.to/2FxdKMF
- Studio MIC: Rode NTG 2: amzn.to/3bjjoDD
- MIC: Shure Lense Hopper : amzn.to/2DqVaVJ
- MIC: Rode Link Lapel: amzn.to/2KzXhet
- TRIPOD: amzn.to/2Drd8Yn
- MINI TRIPOD: amzn.to/2MoXhxS
- Big Light Aputure 120dii: amzn.to/35eTFbr
- Light Dome ii Aputure: amzn.to/2Yfw4G7
- Lanturen Aputure: amzn.to/3bFeZcu
- Small Light Aputure MC: amzn.to/2xahQeo
- DRONE: amzn.to/33vgNCr
- PODCAST MIC (SM7B): amzn.to/3f4bTS6

Пікірлер: 102

@Deraco1 2 жыл бұрын

Looks awesome!! Simple tools and material used to make a great backdrop!

@ardomolce 2 жыл бұрын

awesome video!!!! for people trying to replicate this make sure when you picking led lights from amazon you check how separated the led lights are, and when you pick the pine wood pick the ones that are super straight. God bless you all

@BlackstaRPHTM 11 ай бұрын

woow amazing. we always pray for our church renovation completion . cause we believe God will provide.

@keithcrone4617 2 жыл бұрын

Thanks for the ideas and work you do. A.C.T. (About Christ Theater) will be using these ideas with their stage and church.

@eddychinoda5826 2 жыл бұрын

So far the best

@frankgarofalo843 5 ай бұрын

OMG this is awesome! You are so smart and talented, and handsome! Thanks for sharing!

@nathanwall37 2 жыл бұрын

“You cannot do this by yourself.” My three years of no vacation beg to differ 😂 For real though, having a plan and a team makes a potentially agonizing process fun. Appreciate the great content!

@jamesssemakula165 3 жыл бұрын

Good Job - thanks

@johntorgerskjelstad5619 3 жыл бұрын

Fantastic videos. We are renovating our church here in Norway and want to add LED tape to the design. The back and side walls are large and clean, but white colored... Could you give us some ideas of how we could use LED tape ( and maybe fabric) on white walls? Thanks!

@oleksiimm 3 жыл бұрын

Great! thanks for the ideas sharing) I have a question. How much is this white net visible when the RGB-light is turned off?

@martina8489 Жыл бұрын

Hi! I'm Ana from Buenos Aires Argentina, i love your work. Amazing 🤩. Thank you 😊

@WorshipLeaderHangout Жыл бұрын

Thank you and thanks for watching Ana

@ebube4god 2 жыл бұрын

Hello, I really love your design, I'm trying to implement something similar to our church. However, I live in the UK, can you recommend similar material I can find? How did you hook up the frame at the top? DId you also use one DMX 32ch Decoder for all the RGB? Thanks

@shadowboy23 9 ай бұрын

How funny is this .. I have just started to learn how to pull together LED lights using a chip called ESP32 and I was thinking it would be cool to do something at church with them. Randomly your video popped up and I was not thinking BIG enough lol. This is so cool and such a cool project to get the church involved with, if they are open to it :)

@djpedromixhouston 3 жыл бұрын

i am on to led strip panel biulding, thanks for makeing this video. god bless.

@eddychinoda5826 2 жыл бұрын

This is great

@thomasheath3900 3 жыл бұрын

Hey, I love the videos on the stage designs! Just one question, do you guys need permits to build these sets?

@yhltv6536 4 ай бұрын

nice design

@edcross1 3 ай бұрын

Hi great video and thank you for sharing. It must really enhance your services. I am looking to create a similar backdrop. Would you be able to tell me what material you used. God bless

@andreyadalaka 2 жыл бұрын

This is awesome! Just a suggestion to pre- sew all the pleats according to the dimensions of the frame and have it just stapled to save time. God bless you all! Love your work🙏🏽💯❤️

@aleafgo1 3 жыл бұрын

Love your videos, thank you for all of the great ideas we are few years behind on working your designs, we are working the ping pong ball design to use in our teen room and doing the boxes with the Yarn in our large church for boxes for lettering.

@audiomusicladiscotecamovil711 2 жыл бұрын

Hola gggy es fytdtdAwr a s

@djpedromixhouston 3 жыл бұрын

I am making panales for a dj setup,, very interested in the conectors, plug, and unplug to the dmx decoder, thanks

@netoalas4113 Жыл бұрын

Hi how are you doing?I am loving your videos. Any chance you can give me tips for my project. I have a small room (the space is 6mtsx6mts) and I am trying to find the best configuration. I am planning on doing a total of eight BTF-LIGHTING addressable led strips (60 leds/m) (5mt each 12v) + Muzata diffusers. What would be the best way to power them? Maybe 2 60 Amp Power Supply (running 4 and 4, or running one at the beginning and one at the end)? How many Injections would you recommend? Would I get away with one ESP32 board or should I get more? Or is there any board you would recommend for longer projects? I've seen ENTECCs Octo as an option but would love to get your advice on it. Greetings in advance, love your content

@MrRza1987 Жыл бұрын

Thank for sharing your expirience. If somebody know manufacturers with secret frames for lighting pars on walls, somthing like electric lifts, let me know please

@jakevanskike 7 ай бұрын

Could you describe how you (or where) you attached the power and encoder to the fixture? Top or Bottom? Floor or on the fixture. Thanks.

@bradsnelling5122 Жыл бұрын

You appear to have 30 individual strips (2 per 15 panels) and your saying they can all be individually controlled? Are you using 4 of the 32 channel controllers or did you serial link some of the strips together? Thanks.

@pastormiguelrios3428 2 жыл бұрын

Hello Chat, we really liked the design of the lights, we have all the frames with their LED lights connected to the decoders, but I am stuck in the part of how to connect one decoder with another (I have 4 in total) and how to assign channels to each strip of light, do you have any video? Our plan is to include all the lights to the LightKey, but in these two weeks, we will temporarily connect to an Elation DMX Operator mixer.

@moisemackenson7364 2 жыл бұрын

Respect fi yu my brother

@WorshipLeaderHangout Жыл бұрын

Thank you!

@nickdelacruz3429 2 жыл бұрын

Do you have any videos showing how you design your stage using keynote?

@RENUEVOFUMC 2 жыл бұрын

Question, What color is the fabric? When you go to the Rose Brand link, two colors appear

@Mrle1021 Жыл бұрын

Hi, Where do you download the Keynote for layout the stage?

@paulalexis5768 11 күн бұрын

Are all the light lit up only by the led or are there bars hitting the fabric as well. Is it the LED strips fully lighting the panel?

@patriciomiranda4722 Жыл бұрын

Awesome decoration, inspirational, One question, I am using led strips with a decoder and power source, but the source emits a "digital sound" when the lights are on and increases if the brightness of the lights increases, that even interferes with the audio system (I don't know how), did you have that problem or do you know how to solve it?

@WorshipLeaderHangout Жыл бұрын

I didn’t have that problem but you may need to have your sound and lights on different power circuits.

@rickultraa 2 жыл бұрын

Can you use tulle fabric ?

@reetamoonesar6409 3 жыл бұрын

love your video man need to post more its been forever since the last one

@WorshipLeaderHangout 3 жыл бұрын

Thank you!

@reetamoonesar6409 3 жыл бұрын

@@WorshipLeaderHangout what p0rojector u use

@samiiiieeee 2 жыл бұрын

Can hot glue hold the tape?

@Nathan_Lundstrom 2 жыл бұрын

Using this design as a reference - love it! How did you hang or mount these fabric and 1x2 frames to your stage? Hang it to pipe? or are they french cleated somewhere?

@WorshipLeaderHangout 2 жыл бұрын

They are hanging from the truss with plastic coated steel wire from a hardware store. I used zip ties initially to get them into place before finishing with steel wire.

@brennenforster9312 2 жыл бұрын

@@WorshipLeaderHangout love the video and design! Just wondering if you have any videos or pictures showing how you hang things like this using the wire you mentioned above? I’m a worship leader from Canada looking to do similar designs but just not quite sure how to hang them properly. Thanks for all you do!

@voaji Жыл бұрын

@@WorshipLeaderHangout how do you connect led strips and then light fixtures in thr church all to the light mixer? Do you use a dmx splitter? I habe one 512 dmx decoder for 8 led strips which i understand can thrn be sent to the light controller but i also have about 6 light fixtures i want ro connect to the light controller. How do i do that please

@ronchiles399 3 жыл бұрын

Wow!

@snoopycharlie8718 2 жыл бұрын

Mentioned link for How to combine/ extend the led strips but don't see it in description? Thanks, love the idea

@WorshipLeaderHangout 2 жыл бұрын

This is probably not what you are looking for but I was probably referring to this video about wiring the led strips to extend the wires: How to Wire 32 Channel DMX Decoder, Power Supply, RGBW LED Tape kzfaq.info/get/bejne/aZx6iLF8zrjOgmw.html

@snoopycharlie8718 2 жыл бұрын

@@WorshipLeaderHangout Thank you, think it is what I was looking for !

@BlairNeis Жыл бұрын

what is the name of your church? i'd like to check out a sunday morning service online to see how this design works with your congregation

@djpedromixhouston 3 жыл бұрын

7:35 i need this conectors

@renhal467 Жыл бұрын

What kind of fabric?

@engrndifon5429 10 ай бұрын

What is the name of the fabric you used

@Falconechist 7 ай бұрын

How i can contact with you guys? Need help with computation

@ilivecreations664 3 жыл бұрын

Thanks for sharing. It s good that you could use keynote to do the layout

@WorshipLeaderHangout 3 жыл бұрын

Thanks for watching. About 6 years ago I started using keynote in that way because I didn't have the means to pick up a proper design software. This works for now but I'm sure I'll make my way towards a more dedicated design app.

@ilivecreations664 3 жыл бұрын

@@WorshipLeaderHangoutI honestly didn’t know keynote had these capabilities. Which other design apps are you aiming for ?

@tyler6552 2 жыл бұрын

So if each strip is separately addressed, does that mean you have 30 DMX decoders?? Each decoder has 8 outputs but isn't each decoder just one DMX channel? Or am I missing something.

@WorshipLeaderHangout 2 жыл бұрын

I use a 32 channel decoder allowing me to program 8 LED strips on each decoder.

@shempre6044 4 ай бұрын

anyone concern to comment what software he's using to create idea for stage lighting.. i heard "kino" ( i'm not sure about the spelling ) thanks!

@WorshipLeaderHangout 4 ай бұрын

I used to use Keynote because I didn’t know how to use other design software. Now I use LightKey

@voaji Жыл бұрын

How do you connect the led strip decoder and light fixtures to the light controller

@WorshipLeaderHangout Жыл бұрын

Via DMX and a lighting usb interface

@voaji Жыл бұрын

@@WorshipLeaderHangout so sorry please tellnme what do u connect where? Just a small detail as im new to this. Thank you so much

@ayoanil 2 жыл бұрын

did you find strip lights to be brighter than uplights?

@WorshipLeaderHangout 2 жыл бұрын

The are not unless you double up but they look really good going all the way up the edge.

@ayoanil 2 жыл бұрын

@@WorshipLeaderHangout thank you for this reply. With led strips being 10% the cost of an uplight, I could double up and allow for a better cheaper option.

@russellgoodwin Жыл бұрын

How do you get the pleats at the top to match up?

@WorshipLeaderHangout Жыл бұрын

I measured them as I stapled. Then when I went to the other side I pulled tight looking down the panel making sure each fold was straight and in line with the one on the other side. I also continued to measure each pleat. Only one gave me an issue with not wanting to match up properly so I used a steamer to loosen the fabric.

@russellgoodwin Жыл бұрын

@@WorshipLeaderHangout I'm doing it pray for me lol. You need to come to Wisconsin and help me lol 😆

@rubenparada866 3 жыл бұрын

Hi Chad, could you please show how the stage design looks with all the stage lights on, like when the pastor is preaching? Just so we can have the whole picture. God bless, Ruben

@WorshipLeaderHangout 3 жыл бұрын

Good idea. Look out for a story here on youtube soon. We use ellipsoidal's and use the blinders on them to keep the light off the set design and only on the front section of the stage. The end result looks very similar to what you see in this video.

@Worshiper1298 2 жыл бұрын

Hi Chad... I have the same question 😊 Could you post a picture?

@jahazielalbornoz9374 3 жыл бұрын

blessings as the software is called to make the designs that showed blessings

@WorshipLeaderHangout 3 жыл бұрын

It's an Apple presentation app called Keynote. Not made for designing for stages but I still manage to use it.

@jahazielalbornoz9374 3 жыл бұрын

@@WorshipLeaderHangout thank you very much ❤️❤️

@DTHAW 2 жыл бұрын

Do you have a link for the extension wire?

@WorshipLeaderHangout 2 жыл бұрын

18/5 Solid Jacketed Sprinkler Wire (By-the-Foot) www.lowes.com/pd/Southwire-18-5-Jacketed-Sprinkler-Wire-By-the-Foot/50148248

@spencecrisco376 2 жыл бұрын

@@WorshipLeaderHangout we are using 18 gauge 5 pin LED wire just to keep cost down. then we had a design change and this wire wouldn't have been so bad. =)

@fredyayala4067 Жыл бұрын

How many 32 ch decoders do you use in this design?

@WorshipLeaderHangout Жыл бұрын

We used 4 for this design.

@fredyayala4067 Жыл бұрын

@@WorshipLeaderHangout with this same design as you, can i use only 1 decoder (knowing that i May not control independently the led strips)

@adventureseeker423 3 жыл бұрын

Link for the extension wire?

@WorshipLeaderHangout 3 жыл бұрын

It’s a 5 wire jacketed sprinkler wire from Lowe’s. Thanks for watching.

@taritales 2 жыл бұрын

hello , may we please have the app that you use to your design

@WorshipLeaderHangout Жыл бұрын

It’s just Keynote, Apples presentation software. Its not really a design software but I use it to play with ideas. Lightkey or an actual design software would probably be better.

@taritales Жыл бұрын

@@WorshipLeaderHangout oh thank you need to design for our stage we are having conference so l need to write down my thoughts

@minecraftgamer-kj5pt 2 жыл бұрын

Want to work like this and also w u

@andrewbradice8916 Жыл бұрын

I use to use these backgrounds when i got stoned

@WorshipLeaderHangout Жыл бұрын

@josiahstroud2245 2 жыл бұрын

Did anyone else do this at their church? If so how did it turn out?

@ebube4god 2 жыл бұрын

I'm working on doing the same and will share feedback soon

@jakevanskike 7 ай бұрын

Could you show where you attached the power and dmx decoder to the fixtures?? Thanks@@ebube4god

@michaelrobb9708 Ай бұрын

@@ebube4god How did it go?

@Italia-oz7sw 2 жыл бұрын

This fabric doesn’t exist any longer, has anyone had any luck with another low cost alternative? Sheer organza seems to be really thin?

@spencecrisco376 2 жыл бұрын

I’m looking thru comments for same thing. Went to local fabric store and they had nothing that would work. Someone at church had tons of left over tulle that wouldn’t pleat and was still too thin even doubled up. Now I’ve got LEDs, connectors, wire, etc coming tomorrow. Frames are built and painted….but DIW without some fabric.

@camerongaddy3896 2 жыл бұрын

@@spencecrisco376 dido.. Trying to find some cloth that would work is apparently more difficult than expected

@spencecrisco376 2 жыл бұрын

@@camerongaddy3896 well. Not really. Same company we ordered 25yd of NFR white gauze. Was like $116 shipped. And it’s what they used. Has to be. Grabbed a few stills and blew them up. What’s in the link and what they used…2 different ones. We built the first panel tonight. I’ll see if I can post a pic tomorrow. Or I’ll look you up in the book of faces. 😎

@camerongaddy3896 2 жыл бұрын

@@spencecrisco376 sounds good to me. It'll be next week before I finish tackling this project

@rickultraa 2 жыл бұрын

@@spencecrisco376 how did it do?