No video
RGH Hack an Xbox 360 E | Postfix and Teardown Guide | ASMR
Рет қаралды 76,652
Күн бұрынI wanted to provide a quick Xbox RGH guide on how to apply a postfix adapter and RGH hack an Xbox 360.
This video is meant to be used alongside this guide:
bit.ly/3uEudZr
Link to Octal's J-Runner with extras (be sure to use SMC+):
cdn.octalscons...
Amazon affiliate link to the JR Programmer I used:
amzn.to/2YvTQjD
Amazon affiliate link to the chip I used:
amzn.to/3Dp4cjV
Amazon affiliate link to the X-clamp tool:
amzn.to/3mweVlS
I receive a small monetary kickback for any items purchased via affiliate links.
#xbox
#restoration
#righttorepair
@W00fer 2 жыл бұрын
Very high video quality, I hope you show more which exact pins need to be soldered to what points. Other than that, great video
@RestorationRelaxation 2 жыл бұрын
Thanks for the feedback! I’ll definitely do that when I make guides in the future
@fadedraider1705 7 ай бұрын
remember that some xbox 360 E's are winchester model, therefore they cannot be jailbroken at all, this here 2:49 is a corona model and you can jailbreak it in the RGH 3 way
@Harmonic14 6 ай бұрын
Hence the warning at 0:15 lol
@itailevin 2 жыл бұрын
RGH3 is coming soon! (You won't need a modchip only some wires)
@RestorationRelaxation 2 жыл бұрын
Really? Link anywhere?
@thedrbat9572 2 жыл бұрын
sureeeeeee
@Ahmed-bz5bi Жыл бұрын
RGH3 is available now or not yet ?
@Kintah Жыл бұрын
@@Ahmed-bz5bi it's been available for months
@arnoldthegreat4138 Жыл бұрын
@@Kintah wheres the link
@GoodwinsPlace 2 жыл бұрын
Great video again..Not seen an E been done before. 👍
@RestorationRelaxation 2 жыл бұрын
Thanks :)
@JrManPT 2 жыл бұрын
Very nice, you make it look easy 👍
@RestorationRelaxation 2 жыл бұрын
Thank you!
@BassFoxNation Жыл бұрын
Thank you soo much I was searching for hours trying to find compatibility and luckily my 360 was made before 2014
@Majima487 8 ай бұрын
the clicks and bangs really hit the nail on the head of how noisey this console is to tear down and rebuild, the pop for the screws sounded like the finger in mouth pop heh that was a good idea :)
@ConsoleWarehouse 2 жыл бұрын
Great video! 👍
@RestorationRelaxation 2 жыл бұрын
Thank you!
@xAKIMBOCURLYx 2 жыл бұрын
Was that the original thermal paste? If so it was in great condition considering
@RestorationRelaxation 2 жыл бұрын
Good eye! It’s actually relatively fresh paste from when I restored this console for my personal collection a few months ago
@aliabdallah102 2 жыл бұрын
Also Xbox 360 Es were announced around 2013 so they're not that old.
@wavvy01 2 жыл бұрын
@@aliabdallah102 meh, I just did a Corona E manufactured in 2014 and the paste was quite dry
@oOignignoktOo1 2 жыл бұрын
Yeah in my experience the stock paste they use is junk and every xbox I work on now that hasn't been repasted the stuff is bone dry and brittle.
@thedrbat9572 2 жыл бұрын
@@aliabdallah102 i had a 360 e from 2013 and the paste had nearly evaporated completely
@Void.e 2 жыл бұрын
You are a legend, THANKS! really appreciate it!
@pukalo 6 ай бұрын
Good to see 360 mods carrying on the spirit of original Xbox modding by using the unpopulated debugging headers on the motherboard.
@jessragan6714 Жыл бұрын
Boy, you really gotta put a lot of work into this.
@craig2004 2 жыл бұрын
I got a soldering kit along with everything else to mod a trinity for my birthday. I've never soldiered before so I'm hoping I don't butcher it XD
@RestorationRelaxation 2 жыл бұрын
I believe in you!
@Tedgamer-hm9hq 15 күн бұрын
Excuse me my xbox 360 e was released back in september 2014..is there a way to hack it or jailbroken pllzz replay
@abdurrahmannajdi6188 Ай бұрын
My Xbox 360 E was released in 2014 is there any way to hack?
@jeffbayso6502 22 күн бұрын
Going through the same thing. Doesn't look like you can because every one made after 2013 has a winchester motherboard. Personally I'm going to just put mine up until a hero comes out with a method of hacking that motherboard. May never happen though. I've thought about selling it and replacing it with an older model.
@desahuevate0 2 жыл бұрын
i like my xbox 360e, my only complain is that the tosslink audio output was removed
@xAKIMBOCURLYx 2 жыл бұрын
What is that?
@RestorationRelaxation 2 жыл бұрын
The optical audio out on some consoles
@mohammadhusein9232 2 жыл бұрын
how many watts should my soldering iron be? Great vid btw do more of them I love them for sure!
@RestorationRelaxation 2 жыл бұрын
I’m not sure about the wattage, I’d get one that you can change the temps. And thank you!
@mohammadhusein9232 2 жыл бұрын
@@RestorationRelaxation Np and thank you for the quick reply. If possible do you know what temp you used for that video? tysm
@RestorationRelaxation 2 жыл бұрын
@@mohammadhusein9232 usually around 375-400c
@mohammadhusein9232 2 жыл бұрын
@@RestorationRelaxation ok tysm
@mohammadhusein9232 2 жыл бұрын
@@RestorationRelaxation Also ik this might be too much but 2 last questions. Is there anything else I need to know other than if my xbox 360 E is a Corona 4gb ? If thats all I need to know what type of pieces do I need? (especially the glitch cards). I am a begginer so sorry for asking you boring questions.
@nothingincommon Жыл бұрын
Can this be done on ANY xbox 360 E? I've heard from a couple of YTs only certain 360E can be worked on , specifically those manuf. before 2014. Is that b.s. or just old info?
@RestorationRelaxation Жыл бұрын
360 E’s with a Winchester board cannot be modified unfortunately
@technogatsby3935 6 ай бұрын
@RestorationRelaxation - in theory, can the Corona board from this black version of the E model be placed in the Blue version of the E, replacing the Winchester board? This would give fans of the Blue E model the option of having a modded Blue. Thoughts?
@RestorationRelaxation 6 ай бұрын
Yep
@dizzy21100 2 жыл бұрын
Love to do e serie coronas haha,what did you use on the and of your nand cabels?
@RestorationRelaxation 2 жыл бұрын
I actually cut some extension wires for a Raspberry Pi GPIO kit, and put heat shrink tubing around the end to make it more durable. They work surprisingly well
@dizzy21100 2 жыл бұрын
@@RestorationRelaxation nice man i use the pins of a pinheader😂😂works great also
@retroreviverepairs 2 жыл бұрын
Great video as always. Really wanted to do this to my Halo 3 edition 360 but it seems like the Zephyr boards have a low success rate :/
@RestorationRelaxation 2 жыл бұрын
I’m working on a video for that right now :)
@retroreviverepairs 2 жыл бұрын
@@RestorationRelaxation you're doing the RGH mod on one?
@RestorationRelaxation 2 жыл бұрын
@@retroreviverepairs it’s a little more special than just that, don’t want to ruin the surprise
@retroreviverepairs 2 жыл бұрын
Do you have an Instagram I can follow or a website?
@RestorationRelaxation 2 жыл бұрын
@@retroreviverepairs I don’t, but I should look into making one!
@Apieceofbread09 6 күн бұрын
Im thinking about modding my 360 e would I get banned if I connected my main account and played multiplayer ?
@RestorationRelaxation 6 күн бұрын
@@Apieceofbread09 yep
@Apieceofbread09 6 күн бұрын
@@RestorationRelaxation should I remove all of the accounts from the xbox first ?
@aarongray503 9 ай бұрын
Anyone got any advice for a 360 E not turning on? Power supply providing 5v DC for standby
@gamer-br2nc 2 жыл бұрын
Hey it whould be great if you're are gonna do a video with rgh 3 in xbox 360 E
@zaidkazim9757 2 жыл бұрын
i am unlucky my xbox 360 E was manufactured IN 2014 is there any other way to hack like removing the antivirus from the xbox or something?
@Goodgamer78 4 ай бұрын
Mine too, just check if it’s a corona then RGH3 it. You can’t remove the “antivirus” lol if you haven’t figured out
@lilg8017 11 ай бұрын
It's missing its sacred warning sticker. You need to be told not to move console with disc in tray.
@9ALiTY Жыл бұрын
All Stuff says currently unavailable
@suculento8959 2 жыл бұрын
Hello from Chile c:
@RestorationRelaxation 2 жыл бұрын
Hello! It’s amazing I have a viewer in Chile
@suculento8959 2 жыл бұрын
@@RestorationRelaxation I love your content c:
@RestorationRelaxation 2 жыл бұрын
@@suculento8959 thank you so much!
@MassimoAntonioCarofano 2 жыл бұрын
Hi, nice tutoria! Are you able to do the same tutorial about RGH3 (no modchip required!!!!) on the same console?
@RestorationRelaxation 2 жыл бұрын
Thank you! And not likely on the same console as I sold it already. Maybe in the future if I find one!
@moddingmatrix2791 2 жыл бұрын
Great work! Would an RGH3 mod be possible on the final edition of the console (light blue, 500gb)?
@RestorationRelaxation 2 жыл бұрын
Nope, those typically have a Winchester motherboard which can’t be hacked
@eat457 3 ай бұрын
I have a 360E AND I HAD IF ROT 30 YEARS NO it is good and it runs all of mi favorites game and I purchase 2 GANES the other dey to play it
@QuailsAlt Ай бұрын
Learn how to spell little guy.
@Video_Juice Жыл бұрын
Does it exactly have to be 2014 when it doesn’t become hackable? My Xbox manufacturer date is 2014-01-18
@vwoop Жыл бұрын
2014-08-14 is the cutoff date, you should be fine if your xbox was manufactured before that
@berkealisenelyt 2 жыл бұрын
Where we can find the latest version of aurora ?
@Void.e 2 жыл бұрын
whats the thing that you put under the cpu looking IHS? here is the time stamp 3:39
@RestorationRelaxation 2 жыл бұрын
That’s a postfix adapter
@Void.e 2 жыл бұрын
@@RestorationRelaxation ohh is it necessary to mod the 360? I'm kinda new to hardware modding consoles
@Void.e 2 жыл бұрын
@@RestorationRelaxation I'll just assume its necessary thanks!
@Mehran4040404 Жыл бұрын
how much which set timing board ace file corona?
@YrsBrenton 9 ай бұрын
what type of tool is you using
@nathanielb.5910 8 ай бұрын
my xbox360 was manufactured in 25.11.2014. Is it possible for me to crack it??
@Harmonic14 6 ай бұрын
@Mole460 almost any Corona can instaboot with RGH 3 or 1.2
@emugamers 2 жыл бұрын
Can i do it if my console was manifactured in 2014??
@RestorationRelaxation 2 жыл бұрын
I believe July/August and later of 2014 is Winchester
@bhavayparmar2669 Жыл бұрын
Hey!!my xbox 360 e manufacture date is 2014-11-10 can it be JTAG??
@DreasWaveBroadcasts 5 ай бұрын
No, J-TAG is typically for older models like 2012 and only slim models
@egeberksimsek7371 11 ай бұрын
Where can I do this in Turkey? Mine is this model.
@eat457 3 ай бұрын
Turkeys are generally cooked in the oven, hope this helps 👍
@santhosh.v8386 2 жыл бұрын
My xbox 360 e mfr date is 2014.08.08 can i jtag it
@CurrentGenGamesWithNick Жыл бұрын
I have a question?
@EverSeeThe 11 ай бұрын
How much to mod my E console?
@srinivasprasad837 2 жыл бұрын
Is the mod possible on xbox 360 E manufactured on 2015?
@RestorationRelaxation 2 жыл бұрын
Probably not - it likely has a Winchester board
@Ahmed-bz5bi Жыл бұрын
Kindly confirm that every xbox 360e can b hacked or jtaged by the process you show in this video, or there is some models can b jtaged by manufacturing date, becouse i have a xbox 360e and i take it to markit for jtaged but he says its manufacturing date is latest we can jtaged the older version of xbox 360e, please clear the confusion becouse i want to jtaged my console, thenks
@RestorationRelaxation Жыл бұрын
Winchester models cannot be hacked
@y.b.7104 2 жыл бұрын
Is there any way you can mod an Xbox 360 manufactured in 2014?
@RestorationRelaxation 2 жыл бұрын
Yep, this method should work
@y.b.7104 2 жыл бұрын
@@RestorationRelaxation ok thank you
@devjeetchowdhury454 2 жыл бұрын
can use ace v2
@JustinPNG 28 күн бұрын
…and on second thought my 360 is perfect just the way it is lol.
@SkullboyMus1c 2 жыл бұрын
GOD I WANT TO RGH MY 360 E SO BADLYYYTY I WISH I HAD SOLDERING SKILLS
@siddharthsonkar2072 10 ай бұрын
Xbox 360 e 2015 can also
@ndr4san122 2 жыл бұрын
how to proces mfr date 2014 master
@loganbrown7744 Жыл бұрын
My 360 E was mfr Sep 2014 yet it still has a corona 😛
@lizzielyly 8 ай бұрын
how is that possible?
@hammabrinsi4193 2 жыл бұрын
My xbox 360 version 2015 i can glitch it 🙄🙄
@Harmonic14 6 ай бұрын
No
@OwlCapone8630 2 жыл бұрын
You wouldn't happen to be in North Carolina, right?
@BlindReflex Жыл бұрын
You should speak brahhh
@zohaibtech6949 8 ай бұрын
Hi
@mynamesjeffe782 2 жыл бұрын
You clearly have a mic just use your words
@justxaine.3544 8 ай бұрын
I don't even want to mod mine anymore. To the garbage she goes.😂
@RestorationRelaxation 8 ай бұрын
Just give it to a kid in your neighborhood
@nabnab9 2 жыл бұрын
Soldering sucks
@RestorationRelaxation 2 жыл бұрын
I love it
@yuumi925 2 жыл бұрын
not really a guide. u don't explain properly where all the wires go, what software to use and how to use.
@LenoxFilms 2 жыл бұрын
Lol download jrunner and the program iteself comes with the diagrams for the nand reader 1.- Solder the chip/solder the nand reader 2.- Read the nand and write the ECC 3.- Recover the cpu key from the Ecc , then create the Xebuild and write the nand once again 4.- Done
Fabiosa Best Lifehacks
Рет қаралды 20 МЛН
Restoration & Relaxation
Рет қаралды 34 М.
Fabiosa Best Lifehacks
Рет қаралды 20 МЛН