| RHINO 7 - PARAMETRIC MODELING | Loft + Contour
Рет қаралды 73,141
2 жыл бұрынCNC Cut List ( Fabrication ) - Rhino + Grasshopper Video Link:
• | CNC Cut List ( Fabri...
3D MODEL LINK:
www.shopier.com/ShowProductNe...
STORE LINK:
www.shopier.com/ShowProductNe...
İstanbul Medipol University | Interior Architecture
İstanbul Medipol Üniversitesi | İç Mimarlık
İstanbul | Turkey
Mail: ykp.karaer@gmail.com
Instagram Hesabı:
/ icmimaryakup
Instagram Kişisel:
/ yakupkaarer
Rhino architecture, Rhino tutorials architecture, Rhino 7 SubD, Rhino 7 tutorial for beginners, architecture students, architecture tutorials, Rhino for architects, Rhinoceros 3D tutorial, Grasshopper 3D tutorial, Rhino Grasshopper, Grasshopper architecture, Parametric modeling, Grasshopper 3D course, Rhino dersleri, Rhino mimari modelleme
@alancooke9357 Жыл бұрын
Amazing work with Rhino without Grasshopper. Great process is demonstrated.
@Frases-MAO 18 күн бұрын
Como modelado 3D mis felicitaciones, pero como diseño de sofá, hay detalles que mejorar, principalmente en el respaldo (espalda) ya que tiene ángulo negativo (hacia adelante) cuando debería tener ángulo positivo (hacia atrás)
@ketansingh4881 Жыл бұрын
really great video !! thanx a lot for helping me out
@yakupkaraer Жыл бұрын
I really appreciate your kind words. Thank you.🙌😊
@Milaenily 11 ай бұрын
Thanks to this video I learned what record history does :D
@yakupkaraer 11 ай бұрын
hahaha evet, güzel bir özellik aslında 😊
@Faqiens 2 жыл бұрын
Nice Vid !
@yakupkaraer 2 жыл бұрын
Thank you 😊
@Arya-td5yl Жыл бұрын
Kindly add subtitles about the steps and commands. It'll be easier to understand the workflow.
@yakupkaraer Жыл бұрын
Thank you for your comment. Subtitles will be added. 😊
@alalalus7692 8 ай бұрын
Still no subtitles@@yakupkaraer
@andresenriquez5756 23 күн бұрын
nothing still ?
@yosofya Жыл бұрын
Thanks you for the great tut. I was wondering if you can show us how to lay them flat ( Nesting ) later on and maybe numbering the pieces to get them ready for CNC production.
@DJ-ll2ye 6 ай бұрын
each section needs to be aligned to 1 plane. if each part has a lot of draft, make sure the side with the most surface area sits on the plane so you can run a ball nose contour path around it. Align a face of the body to the plane you want so it sits flat
@yakupkaraer 5 ай бұрын
Check out the video where I prepare the cutting list from grasshopper.🙌🙌 Link: kzfaq.info/get/bejne/Y5-Ee6yWuZa-dIE.html&ab_channel=YakupKaraer
@yosofya 5 ай бұрын
Appreciate your Response and Support. I have watched it, looks exactly what i was looking for. I hope your next videos will be with voice recording and more explanations. that would be awesome. thanks @@yakupkaraer
@somiaagoush2905 Жыл бұрын
thank you ! but how did you close the right and left with the surface after extruding the lines?
@yakupkaraer Жыл бұрын
With the cap command. I did it at 6:07. Did I understand the problem correctly?
@shamimvahdat6232 Жыл бұрын
Can you explain more please?
@alanemoraesdeoliveira Жыл бұрын
Hello! At 3:43 when I extruded the curves, the surfaces haven't created, just the edges are looking. Did I wrong thing?
@yakupkaraer Жыл бұрын
After entering the "ExtrudeCrv" command, the "Solid" option in the command bar above should be set to "Yes." 😊🙏🏻
@maiabdelsalam22 2 жыл бұрын
Hi, how do you select the isocurves and move them then the loft changes automatically ?
@yakupkaraer 2 жыл бұрын
Activate record history before loft. If you look at 2.02 minutes. 😊Then click surface. Then click f10. 👍
@MR.credent1al 2 жыл бұрын
@@yakupkaraer It worked
@casaproductoramejia 10 ай бұрын
@@yakupkaraer THANK U! I had the same question
@eliir5720 8 ай бұрын
thank you same question @@yakupkaraer
@vishakhaswami5860 Жыл бұрын
I can't understand 2:24 min point After clicking on curve u have drag is front side & after that what u did to make a curve bench plz tell me..
@yakupkaraer Жыл бұрын
Open Record History. Select the lines and enter the loft command. The lines will slide. 🙏🏻🙏🏻
@marabelsito4270 4 ай бұрын
can u explain that part in a different way? it still doesn't work for me@@yakupkaraer
@yakupkaraer 4 ай бұрын
@@marabelsito4270 Keep only the lines. Enable the Record History option below. Select all the lines. Enter the 'Loft' command. After changing the positions of the lines, the object's position should change instantly. -- Did it work for you? -- 🙌
@eliftk4201 2 жыл бұрын
selam, bu yanda loft ayarlarını düzenlediğiniz seçeneklerin çıktığı bilgisayar simgeli arayüz bende bulunmuyor? atrı bir eklenti mi eklemeliyim? nasıl açabilirim? teşekkürler.
@yakupkaraer 2 жыл бұрын
O kısıma sağ tıklayın. Display diye çıkacaktır. Display'i aktif edin olacaktır. Sorunuzu doğru anladıysam..😊
@eliftk4201 2 жыл бұрын
@@yakupkaraer teşekkürler :)
@omarikbal7479 Жыл бұрын
great video. Now , if we were to make this. How would we get the sections for each contour?
@yakupkaraer Жыл бұрын
The easy way is to do it from Grasshopper. But if you don't know Grasshopper, you need to extract from Rhino one by one.🙏🏻🙏🏻
@yakupkaraer Жыл бұрын
Nice question 😊😊
@susurrosjoe6817 Жыл бұрын
@@yakupkaraerHow It would be on Grasshopper? I'm very interested cause maybe It could apply to pollar arrays too. Thx very much.
@yakupkaraer 5 ай бұрын
Check out the video where I prepare the cutting list from grasshopper.🙌🙌 Link: kzfaq.info/get/bejne/Y5-Ee6yWuZa-dIE.html&ab_channel=YakupKaraer
@ahmedakkouche7431 6 ай бұрын
Thank you so much ❤. But how i can export cutting template of this kind of shapes ?
@yakupkaraer 6 ай бұрын
There are fabrication videos related to Grasshopper available on KZfaq. I'll also have a project soon. But unfortunately, it requires using Grasshopper. 🙌
@Romkavers 5 ай бұрын
Nice. How much cost the Software?
@yakupkaraer 5 ай бұрын
You can look at this link. Link: www.rhino3d.com/en/sales/europe/Turkey/all/
@T4M3R4K 5 ай бұрын
bRAVO .. ,.
@user-wy1du8ed9u 7 ай бұрын
JK,
@ahmetnurikok5674 4 ай бұрын
Bir de anlatım yapsaydın daha güzel olurdu. Teşekkürler.
@yakupkaraer 3 ай бұрын
Global'e izlenmesi için anlatım yapmıyorum. Biraz Rhino bilgisi olanlar için aslında videolar. Teşekkürler.
@ahmetnurikok5674 3 ай бұрын
@@yakupkaraer öğrenmeye devam o zaman. Teşekkür ederim.
@victorjasa Жыл бұрын
Good idea. Nicely done… never the less The worst music ever
@yakupkaraer Жыл бұрын
Thank you for your comment. The music is subject to copyright issues, which is why finding good royalty-free music can be difficult. 🙏🏻🙏🏻
@javiermauriciopalominorami2981 17 күн бұрын
Iba muy bien hasta que hize el barrido y me quedó en color negro el modelo 🤣
@rooferspb 10 ай бұрын
А чё так медленно всё делал? Надо было бы побыстрее, чтоб ещё больше непонятно было. Мне же так хочется постоянно перематывать назад и смотреть со скоростью 0.5
@yakupkaraer 10 ай бұрын
Thank you for your comment. I'll make a faster version of it in a video for you as soon as possible.🙏🏻🙏🏻
@rooferspb 9 ай бұрын
@@yakupkaraer thanks
Last Leg Woodworks
Рет қаралды 663 М.