Instructor : Abhinav Goyal (B.Arch, Mcoa, Authorised Rhino Trainer) Follow us on formforge www.formforge.co
Пікірлер: 144
@irislilies54697 жыл бұрын
thank you for the tutorial! the length of the video is not too long and the tutorial is easy to follow. keep the tutorials coming please! :)
@farzadjahanfard4 жыл бұрын
Love it man thanks please do more you are the only person that is easy to understand what you are doing amazing man thanks
@savvygabram107 жыл бұрын
love this. give us more! you're great
@joonhoephang67166 жыл бұрын
Your tutorials is great! Thanks for posting and sharing it!
@natalialavie87204 жыл бұрын
Hey! Awesome tutorial, thanks so much! Please keep on making these great vids!
@1vidad5 жыл бұрын
You are just amazing, thank you 1000 times
@thatagz7 жыл бұрын
Great tutorials!! keep posting! your methods are very good! super easy to understand!
@Holly-wy9ss5 жыл бұрын
Very thorough and easy to follow and understand. Thank you.
@ioantis_5 жыл бұрын
So, my friend, i study architecture and i really really want to say thank you for this awesome tutorial. Really really useful. I'm definately going to use these technics in one of my projects. Thanks
@abdullahten13085 жыл бұрын
Ntua ? :D
@ioantis_5 жыл бұрын
Nope, University of Patras
@bigoz17347 жыл бұрын
You've just saved our uni project. Thank you for this tutorial
@formforge7 жыл бұрын
+Harrison I am glad... you can contact me for any further help!
@patriciadelapena35326 жыл бұрын
This is such a helpful video! Thank you so much for this tutorial :)
@michaelowen83 жыл бұрын
This is AMAZING! Well done bro!
@khokulramana13186 жыл бұрын
Nice work man....rhino tutorial from an Indian......great goin' good job.
@krishnasahu32817 жыл бұрын
thankyou sir... this video is very helpful in learning rhino......... pls keep posting such videos...!!! god bless you
@zehraaltuntas19347 жыл бұрын
Incredibly helpful, hope you to upload more of these...
@DJRod917 жыл бұрын
Where were you when I had to do this last spring! it took me hours to figure out :/ Im glad this is here now. Such a good workflow.
@formforge7 жыл бұрын
Daniel Rodriguez thankyou. next time send in your quarries, let's make something more interesting
@prajaktkarmarkar83107 жыл бұрын
Great tutorial! helped me to build the model so quickly
@jordanbenaderet79297 жыл бұрын
I like your turorials. Very helpful but please use an exterenal mic of better quality. The quality and level of sound is very poor and low. Thank you for posting though ;)
@formforge6 жыл бұрын
sorry about audio quality, will take care next time
@gotango20086 жыл бұрын
Great work! Will be following you!
@ruxandramariapopescu93196 жыл бұрын
This was very helpful ! Well done explained ! Thank you !
@rakshavasani7768Ай бұрын
thankyouuuuuuuuuuuuu sooo much for this you are life saver
@tonythongpaseuth75297 жыл бұрын
Damn! Best tutorial ever, thanks :)
@UTCHEATS124 жыл бұрын
Great video. Anyone who is having the problem of not everywhere being solid, make sure you JOIN the surfaces instead of GROUP. A simple command which makes a huge difference.
@himanshuadnani74404 жыл бұрын
i am unable to join rhino 6
@himanshuadnani74404 жыл бұрын
if any one else is unable to join the curves just cap them after extrusion you will get same result
@muhammedsenaaslangil95366 жыл бұрын
You'r really helpfull guy. I'm thankful to you very much.
@vishalsignapurkar6 жыл бұрын
I like your tutorials very much..
@estheroguntona44327 жыл бұрын
Helpful tutorial how would you continue the waffle of the vertical tube, ( so the contours continue till the ground) .Thank you
@eagle98934 жыл бұрын
ı wanna say to thanks u for ur presentation, ı am a architecture student and our teachers are so interested in rhino and they want to see modelling our projects on rhino so this video is incredibly beneficial
@formforge4 жыл бұрын
Thankyou ;)
@dhruvsharma38632 жыл бұрын
this video saved my life 😌
@villemononen53036 жыл бұрын
Very very nice! Well done!
@insidiousar23736 жыл бұрын
good one and very well explained....since i am new with this software could you do a video on all the tools relevant to architecture modelling, like 2d documentation, 3d model building, rendering etc to make your channel one stop point , i know its lot to ask but if you could it would be very helpful. and off course will wait for your next video
@ew27846 жыл бұрын
you're a legend man!
@jannynebianco33725 жыл бұрын
Amazing Tutorial!!!! thankyou
@yizhang53304 жыл бұрын
Doctor says my hearing was ok, then I show him this video. ;) Thank you though!
@formforge4 жыл бұрын
This video is for Audiophiles ;)
@user-nl5jm8gr2y3 жыл бұрын
brilliant!thats what i want. u make it in a simple way,without using grasshopper. great
@demamade15035 жыл бұрын
thank you ! great an easy to follow
@alastinjudy34475 жыл бұрын
OMG! Thank you SO MUCH!
@setareabbasian22027 жыл бұрын
it was really helpful thank you so much
@kermiciara4 жыл бұрын
This was very helpfull, thank you!
@muhammadjamilnawabnawab44694 жыл бұрын
Great one Dear like sixer in cricket.
@jackzheninghuang8916 жыл бұрын
Best tutorial ever
@liuyuzhou68256 жыл бұрын
Thanks for your tutorial. I just get a problem after ExtrudeCrv that some of the pieces with thickness are not in solid. I just try to use cap-fail, planarcrv on both side-fail(seems like the curve is in segments), even patch-fail. But one of their surface is created by curve boolean, others can not. Is there any suggestion to fix the trouble?
@jjj123g7 жыл бұрын
thank you!!!! you help us so so much
@mojtababahmani5 жыл бұрын
Great Tutorial! Thank You...
@meharbhallay67223 жыл бұрын
AMAZING TUTORIAL... THANKS A LOT
@nikhilverma25535 жыл бұрын
hi thank u for the video .... but why is my being extruded in horizontal direction at the end @14.42
@kyokomogami34635 жыл бұрын
It would be nice if the like was clear enough to understand anyways thankyou it's a great help
@MrAmmarTV5 жыл бұрын
how did you join the curves after contour?
@allthebest53017 жыл бұрын
enormous thank you!! :)
@saranamdarian10537 жыл бұрын
awesome tutorial! thank you
@Epicmou5e5 жыл бұрын
Great tutorial, thanks!
@juaninci7 жыл бұрын
thank you at all really great work. i would build simply wood estructures to all my proyects thanks!
@amulyasai30104 жыл бұрын
I have imported cad 2D outline plan on rhino and am trying the same. After rebuild I am unable to play with the control lines along z axis
@AnishKrish5 жыл бұрын
Superb bro, thank you
@BRXVWN4 жыл бұрын
Man thanks a lot for this very useful tuto ! I just got a little issue.. after triming the circles onto the surface the curves appeared segmented so impossible to loft or blend. Can someone help ?
@lydiazou14936 жыл бұрын
So helpful! Thanks a lot!
@georgiosdrak6 жыл бұрын
Really useful, thank you!
@h.rubensuasnabar40887 жыл бұрын
Excellent!
@huaiyu0x593 жыл бұрын
like it! so great~very helpful :D
@barboraferiancova26246 жыл бұрын
Thank you very much!
@amrpop13196 жыл бұрын
when I blend surafe the two surfaces he selects a single edge ?????
@pablopaci6 жыл бұрын
How to obtain the CNC cutting planes of each of the panels?
@lidibethwong5555 жыл бұрын
This tutorial is awesome! I’m just having a bit of an issue when offsetting the surface. There are some parts in which it doesn’t offset and I can’t work out what the issue is.
@formforge5 жыл бұрын
My guess is the curvature of surface you have bent is more then offset distance.
@harithasaad39603 жыл бұрын
Thank you so much you make it like a piece of Waffle
@boulahya056 жыл бұрын
owesome job thanks
@daniaik25023 жыл бұрын
amazing!!!!
@otto80707 жыл бұрын
Thank you so much!!!
@Jobcumentary7 жыл бұрын
was great to know first
@TooLiveChris7 жыл бұрын
Great tutorial! Can you please increase the volume of the video, I can barely hear you.
@formforge7 жыл бұрын
C Ford sorry man that's how it got recorded. best you can plug your ear phones in, will be lot better.
@formforge6 жыл бұрын
sorry about audio quality, will take care next time
@israfiltaslbeyaz89094 жыл бұрын
Actualy ı cant not hear you nevertheless you are perfect for me . thank you so much. please continuation
@rhfali81156 жыл бұрын
Thank you so much
@Ritvikazzvlog6 жыл бұрын
Abhinav bhai thanks bt next time volume thoda high
@digitallyhandmade38246 жыл бұрын
This was super helpful. Turning up the gain on the mic would make it easier to hear, but the lesson was well done.
@formforge6 жыл бұрын
sorry about audio quality, will take care next time
@user-xj6tf8my3w4 жыл бұрын
Thank you!
@nirencunthen13905 жыл бұрын
Thx a lot very helpful
@datta3ya6 жыл бұрын
Amazed
@martinpareja33477 жыл бұрын
THANK YOU
@fyless792 жыл бұрын
Thanks for video
@joonhoephang67165 жыл бұрын
Hi Sir, I have encountered a situation where there is no isocurve shown in the TOP view that makes me could not trim the line within the eclipse. May I know what the problem is?
@patty156315 жыл бұрын
I could not trim the surface within the elipse and can't figure out why either.
@erosangelos94227 жыл бұрын
Hello and thank you for great tutorial,just please make sure your other videos the sound quality is better )) ,my Volume is the top notch and barely can hear you. good Video thanks
@formforge6 жыл бұрын
sorry about audio quality, will take care next time
@yuvarajbonde23186 жыл бұрын
control points were not showing when selecting and hitting enter of the curve plz can you solve it
@jfakhroo06 жыл бұрын
Very helpful . Thank you for the hard work. Just a small comment tho. Get a better mic cuz it was so hard for me listening to your voice.
@Kevin-kw3ug5 жыл бұрын
amazing
@dom14306 жыл бұрын
awesome
@Happy-oj2ke Жыл бұрын
Worked, thx
@furkankon86797 жыл бұрын
bro thank u so much for ur effort in this video...but I have a problem with making contour..when I implement the contour tool I had some empty surface and some of them are solid ..what is the problem ?? u know ??
@formforge7 жыл бұрын
Hi, It happens when the geometry or object is not clean. you have to be careful then you are blending two different surfaces. add cross sections if you have to. the resultant surface should not overlap or have any gap. you can to a surface check surface>edgetools>showedges for poly-surface objects.
@furkankon86797 жыл бұрын
thank u so much bro ..I will check it :)
@furkankon86797 жыл бұрын
can u send to me your model file..if you have it I could not find my mistakes??? furkankon@gmail.com
@formforge7 жыл бұрын
It will be better if you mail me your file at abhinav@formforge.co if will check it for errors
@arushigoel92176 жыл бұрын
great tutorial..but I have this problem that I am not able to join the contour lines and group them ..when I press the command join the selection goes off? I tried to see the command in the video..it doesn't show anything? could you suggest where is the problem
@formforge6 жыл бұрын
Group them right when you make contour so it can be selected later all together.
@_inan_2 жыл бұрын
had the same problem. grouping worked though
@liadnil5 жыл бұрын
Eres el mejor
@yarivkenigshteinhellden18915 жыл бұрын
love the indianess
@oguzhangur6627 жыл бұрын
first thanks for video :) and when you click on ellipse or circle arrows appear but when i click on those arrow things doesnt appear do u have any idea about it ?
@formforge7 жыл бұрын
+Oğuzhan Gür this is bit unusual. Make sure your gumball is on. If you can send me a small videoclip of this may be I could help.
@graysoncroucher16505 жыл бұрын
Hi, Abhinav Goyal love this video very helpful! Just wondering how I would make this into a laser cut flat file, is there a particular way to do this?? would love to find out :))
@chathurangakulathilaka44525 жыл бұрын
thnk you
@ThanhTamTiVi2 жыл бұрын
Like liền cho bạn hiền nhé
@RegisR3D6 жыл бұрын
The sound is low !!
@tadeosanchez4184 жыл бұрын
Genio
@mk-ul5tv3 жыл бұрын
Wtf I loved it
@parisajavid1875 Жыл бұрын
👏🏼
@naishadhjoshi70065 жыл бұрын
Bro please upload other video and work other
@Howhizzle5 жыл бұрын
CAN'T HEAR YOU! SPEAK LOUDER PLEASE!
@jacobsobelman39234 жыл бұрын
When I do the Rebuild command, after I click OK all the control points disappear without giving me the chance to rebuild the surface. How do I fix this issue?
@formforge4 жыл бұрын
Hi. Try to explode surface before rebuilding it.
@technopen82285 жыл бұрын
Hi it is easy to design, but is it feasible, please let me know thanks.
@formforge5 жыл бұрын
zenkyumaestro.blogspot.com/2012/10/sevillas-gigantic-new-waffle-in-sky.html?m=1 This is a real example. This tutorial does not cover the engineering aspect of it. That depends on scale and budget of the project.