Rhino-Rack | Pioneer Platform Flat Pack Assembly Instructions

Рет қаралды 56,689

2 жыл бұрын

Learn how to assemble your Flat Pack Pioneer Platform by watching this instructional video. Please note before commencing any installation you should review our website for the current instructions.

Пікірлер: 38

@thelazyoverlander 2 жыл бұрын

I had one on my 76 and now I have one on my 105, wouldn't use any other brand. LOVE my Pioneer Platform.

@RhinoRackAustralia 2 жыл бұрын

So great to hear, thanks for taking the time to leave this feedback! Happy adventuring 🤙

@Coreyvallephoto 2 жыл бұрын

Did you notice a huge impact on fuel mileage & noise?

@RhinoRackAustralia 2 жыл бұрын

Please refer to this link for the printed instructions for the Pioneer Flat Pack Assembly featured in this video - assets.rhinorack.com/Instructions/Accessories/Pioneer-NG-Fitting-Charts/R2445%20Pioneer%20NG%20Alloy%20Tray%20flat%20pack.pdf. Please note instructions are subject to change. Instructions current at Feb 2nd 2022.

@chadboudreaux1685 Жыл бұрын

Would love to know how many screws go where.

@elgastsos210 10 ай бұрын

Went to web site and it threw me into a gladiator category. What all do I need to purchase to attach the 54x52 pioneer platform to a Jeep JKU Hardtop. Very confusing?

@seniorchief.e8 17 күн бұрын

I paid 1800 for purchased and installed @ In &Out Big Tires and Trick Trucks

@arrosiu1188 Жыл бұрын

Thanks for not telling me how many screws I need to insert in each slot.

@RobertWoodTexas Жыл бұрын

We here at Rhino-Rack have spent multiple minutes developing the most obfuscated instructions we could. We know you spent more than $1,000 on your platform, but only God can tell you the spacing of the cross bars. However, to help, there is a QR code in your "instruction" book that will take you to a page that does not work. If you have issues, please call customer support. They are happy to tell you they will provide help, but sorry, that joke is on you.

@T0DDS 2 жыл бұрын

How much height does this add to the roof overall once fully installed? I have a garage door clearance issue and every inch is going to matter.

@RhinoRackAustralia 2 жыл бұрын

Hi Todd, thanks for reaching out. It depends on your vehicle and the type of roof rack fit. Feel free to email us at customerservice@rhinorack.com.au and the team can assist you with your specific vehicle fit. Thank you

@T0DDS 2 жыл бұрын

@@RhinoRackAustralia thanks, my application is for a 2021 Jeep Wrangler 4 door hard top. I’ll email the address you provided as well.

@Jays_Off-Road_Adventures 11 ай бұрын

What size are the bolts that attach the rack to the feet? I have a JL Unlimited Rubicon and my Pioneer rack is assembled with the backbone supports as well but there is very little room to screw down the 6 bolts and none of my paperwork says what size they are. Thanks.

@darranjacobsen4366 5 ай бұрын

How about what size is the rack??

@Jays_Off-Road_Adventures 5 ай бұрын

@@darranjacobsen4366 72”x56”. I eventually got everything figured out and the roof rack has done great. I have an iKamper Skycamp 3.0 on it that is huge and it handles it along with me and my gear with no issues whatsoever.

@thejeepbountyhunter Жыл бұрын

Will this hold the weight of an awning and shower caddy? For jeep wrangler

@RhinoRackAustralia Жыл бұрын

Hi there, The platform itself will hold the weight of these items, but the cargo limit is based on what your vehicle can carry. Thank you

@david.chappers 2 жыл бұрын

You don’t have the exact size I’m after. Can I cut the slats that run parallel with the vehicle to make it shorter. Thanks

@RhinoRackAustralia 2 жыл бұрын

Hi David, thanks for reaching out. If you email our team at customerservice@rhinorack.com.au they will be able to assist you with your query. Thank you

@jasonlavastida3341 4 ай бұрын

Jacked up instructions. Do you initially put 12, 16, 20 or 24 of those tabs in (L)

@dwcarc Жыл бұрын

"Don't take your vehicle though the automatic car wash with the roof rack on." Is this true as the rack seems like a more permanent accessory?

@RhinoRackAustralia Жыл бұрын

Hi David, if a permanent roof rack is fitted to the vehicle we recommend to hand wash the vehicle only to avoid any damage. Thanks

@georgesdesk Жыл бұрын

After contacting Rhino-Rack to attempt to obtain some small screws for corner caps that were missing the customer service was not exactly sure how to supply such a small request, apparently it had to involve their engineers and even then, after three days still could not come up with a solution to help a request a customer of theirs must say very dissatisfied and disappointed at such low customer service

@RhinoRackAustralia Жыл бұрын

Hi George, sorry to hear - from our understanding this has been resolved now. If you need further assistance please let us know. Thanks

@georgesdesk Жыл бұрын

@@RhinoRackAustralia yes thank you

@housekeys9768 Жыл бұрын

Yeah but how do I attach it the mounts to my truck

@RhinoRackAustralia Жыл бұрын

Hi there, if you head over to our website and enter your vehicle details into the Fit My Vehicle search www.rhinorack.com/roof. You will find the complete web listing for your specific vehicle Pioneer Platform fit - including the different mounting options. If you have any questions or if you'd prefer to speak to one of our team directly, you can call 877-744-6622 or email customerservice@rhinorack.com. Thanks

@housekeys9768 Жыл бұрын

@@RhinoRackAustralia do they all require drilling holes?

@MrChxzqw 8 ай бұрын

Hi team, this is for my 2021 Prado with factory roof rail. So I got a Pioneer Platform 1928 x 1236mm and raised rail leg kit RX100, as per your website they are compatible. However it appears that once the leg is placed under the platform's slot, I am not able to tighten the screw as the screw is completely blocked by the side steel bar. So what am I missing here? or the RX 100 is not the right choice? Thanks.

@edenrow1901 7 ай бұрын

Any update on this? I'm lost as well...

@MrChxzqw 7 ай бұрын

Hi, @@edenrow1901 i ended up with drilling 4 holes on sides. if u go to Rhino's website and search the rack, u would probably see something called 'fitting chart', in which states that it needs drilling 8mm holes, which however doesn't appear in the manual of either Rack's or leg kit's. Honestly am not happy with that and a bit regret bought the item...

@abbeyro6762 7 ай бұрын

Me too, so frustrating

@adventureD1 Жыл бұрын

What size is the last form?

@RhinoRackAustralia Жыл бұрын

Hi there, the Platform shown in the video is our 52108: www.rhinorack.com/en-au/products/roof/roof-trays/pioneer-platforms/pioneer-platform-1828mm-x-1426mm-_52108. Thanks

@erintetro9974 10 ай бұрын

Congratulations Rhino Rack for producing THE worlds worst assembly instructions- Undecipherable

@davidteixeiramarauder 5 ай бұрын

For the money we pay for this, would be nice to have better instructions …

@dennis8647 5 ай бұрын

YOUR WRITTEN INSTRUCTION are missing important details, example - page 5 of 9 it FAILS to show the distance between the five cross rails. The "link" in the instructions don't work and your website does NOT have the information either. What a Joke !!!

@JustinD0917 9 ай бұрын

Absolutely useless video the directions that come with the kit are not very helpful either. Now I have to use the Allen key to adjust the platform and I can’t fit my hands in there. So I have to take the whole thing off again then guess and hope it fits. Not very happy with the help considering the price tag.