Rhino Tutorial | Industrial Design | Vacuum Sealer Part 1

No video

Rhino Tutorial | Industrial Design | Vacuum Sealer Part 1

Рет қаралды 5,739

Күн бұрын

Reference image:
drive.google.c...
Reference tutorial:
www.bilibili.c...
Product:
www.waringcomm...
Model_1:
drive.google.c...

Пікірлер: 11

@pratheek2011 24 күн бұрын

By far, the most useful Tutoral, solved all my doubts . Thank you

@Fasimedes Жыл бұрын

Best explanation EVER!

@Daoru_Wang Жыл бұрын

Thanks for saying that!!!

@hn7405 10 ай бұрын

Thank you!

@anarmirzayev 3 ай бұрын

Thanks for the tutorial vid, Daoru. but I couldn't get how you managed to pull down the two curves at the back while also pulling down the curves reflected on the surface. really appreciate it if you could enlighten on that. 12:50

@Daoru_Wang 3 ай бұрын

Thanks. Please use "record history", and the link is here: docs.mcneel.com/rhino/5/help/en-us/commands/history.htm#:~:text=The%20status%20bar%20Record%20History,option%20using%20the%20History%20command.

@magorzataromanowska7474 8 ай бұрын

Hi, what's your approach to modeling more complex objects, whose cross-sections vary more than in the vacuum stealer in the tutorial? Would starting with surface network, sweep1, or sweep2 but with more cross-sections have bad implications for further steps? PS: thanks for the valuable tutorial :)

@mari6448 4 ай бұрын

Hi Daoru! Thanks for your wonderful tutorial, as I see in some of the comments below, I am also getting too many checkpoints and too many slashes on the surface, when I do "Sweep2"... (video 6:08 ) I checked if both curves have the same angles and points, and they do, so I'm not sure what I'm doing it wrong..

@Daoru_Wang 4 ай бұрын

That’s because your two curves have different DEGRESS or different amount of CONTROL POINTS. I don't know what do you mean "angles". Please try to copy and paste one curve to generate the second curve, and then change the control points on the second curve accordingly to make the adjustments.