Richard Raffan makes a depth drill - useful when turning bowls and boxes.

No video

Richard Raffan makes a depth drill - useful when turning bowls and boxes.

Рет қаралды 17,629

Күн бұрын

You see me re-purpose an old tool handle as I make a depth drill. A depth drill is used to set the depth to which you want to hollow when turning a bowl, box, or vase.

Пікірлер: 41

@davidshaper5146 Ай бұрын

The sock should have its own KZfaq channel.

@hedge685 Ай бұрын

Don't forget Son of Sock...

@davidshaper5146 Ай бұрын

@@hedge685 Not to mention the Return of Son of Sock.

@jorisdemoel3821 Ай бұрын

@@davidshaper5146 The Revenge of the Return of Son of Sock

@TalRohan Ай бұрын

@@jorisdemoel3821 and the boxing version... left sock, right sock, sock it to em

@kenvasko2285 Ай бұрын

The pointed end on the drill is one of my favorite tips.

@n64previews29 Ай бұрын

The “on screen” text was very helpful! I’m going to attempt to make a depth drill this weekend. Amazing skill to have. Thank you!

@ianbedwell4871 Ай бұрын

I watched Richard use this technique for a while and when I made one I made a handle that was slightly triangular to be able to grip it better. Also notched the drill similar to his in roughly 1/2 inch increments

@RichardRaffanwoodturning Ай бұрын

Good idea.

@DavidBird-uu8km Ай бұрын

Very nice, a great way to reuse a former handle to a new use.

@gregdownunderinOz Ай бұрын

Certainly a useful tool. I don’t like using a depth hole as the hole sometimes causes me to get a catch, probably don’t go slow enough when approaching centre of bowl. I use a rule and measure depth of cut. Haven’t made a funnel yet with this approach. Thanks for sharing Richard

@eltay3 Ай бұрын

Richard’s reasoning is that it helps to know where the shape is going. I have learned to do the same and concur.

@glencrandall7051 Ай бұрын

Excellent demo. Excellent tool. Thank you for sharing. Have a great day and stay safe.🙂🙂 I agree with David about the sock.😋

@ZOEng99 Ай бұрын

beautiful simplicity

@johnnyb95678 Ай бұрын

Thank you, I am going to update the handle on mine now too.

@carolriley8472 Ай бұрын

Looks good...I need to make one of those!

@AlienLeader4 Ай бұрын

Very nice. Thanks for sharing your knowledge. Keep ip the awesome work . 👽

@MarklTucson Ай бұрын

Enjoyable video to watch your techniques and looks like a useful improvement to the previous design, giving you much more control.

@bradbyers7505 Ай бұрын

I need to get busy and make some of these!

@jorisdemoel3821 Ай бұрын

Very useful tips on how to re-use an off-centre handle. Ash, or some other wood? Another amusing and informative video.Thanks!

@RichardRaffanwoodturning Ай бұрын

West Australian Forest sheoak

@ArchEdge Ай бұрын

Perfect timing Richard. I have some files which need handles!!

@timofeyzhukov-khovanskiy9173 Ай бұрын

I wonder if an inertia sander would get rid of some perpendicular marks on spondle work

@RichardRaffanwoodturning Ай бұрын

It does, but sanding with the grain does a better job.

@markduggan3451 Ай бұрын

I was surprised that no glue was used.

@RichardRaffanwoodturning Ай бұрын

Some epoxy would ensure the drill stays in the handle, and also that the handle gets thrown out when the drill is too short to be useful

@eegaugh Ай бұрын

You don't go into the details of the drill bit and I assume that a standard HSS metal-working twist drill does the job well enough. Any thoughts, however, about the form of the tip and type of flute, etc? Thank you for your continued encouragement of the art; is another book on the stocks and will you deal with any significant changes of mind you have had over the years?

@RichardRaffanwoodturning Ай бұрын

Standard metal-working twist drills do the job, but I also use small gouges as you see in many of the videos. I've never measured the drill bevels, but have used a variety of flutes, all of which work well. I've no more books underway other than a few notes on my life as a turner - few people learning the craft seem to be interested in reading books whilst there's so much information free on KZfaq.

@eegaugh Ай бұрын

@@RichardRaffanwoodturning Thank you for taking the trouble to reply. KZfaq content is, of course, variable in quality, as are books, but the latter are, or should be, edited and reviewed.

@STMwoodturning Ай бұрын

Nice recycling job! I see you wearing long sleeves under your smock. Is winter in full force in your part of Australia?

@RichardRaffanwoodturning Ай бұрын

Shot in June when temperatures rarely rose above 12°c. with below zero most nights. Even colder now, mid-July.

@tebscat Ай бұрын

@@RichardRaffanwoodturning A bit like summer here in the UK then...

@STMwoodturning Ай бұрын

@@RichardRaffanwoodturning burr! Exact opposite here in Georgia USA. Rarely gets below 70f at night rises to mid 90'sf by 3pm. Humidity near 100% by sunrise, drops some as it heats up. Definitely the dog days of summer now

@alandisomma-od5fz Ай бұрын

Is the wood cherry?

@RichardRaffanwoodturning Ай бұрын

West Australian forest sheoak.

@alandisomma-od5fz 29 күн бұрын

@@RichardRaffanwoodturning it pure is pretty?

@Parkview112 Ай бұрын

How long is the drill bit?

@RichardRaffanwoodturning Ай бұрын

Must be about 120mm. It's a standard drill that's been in use a year or two, so slightly shorter than new.

@davidfriedman3962 Ай бұрын

As a new turner I have to ask, how is this used? Thank you. David

@STMwoodturning Ай бұрын

It's used for drilling out the center of the blank before you hollow it out. Having the center drilled out make judging the hollowing depth much easier. Raffan has many bowl turning videos where he uses this technique.

@RichardRaffanwoodturning Ай бұрын

@@STMwoodturning Many thanks for the input.