How did you wided your typon? I want to make mine wider, like how you have yours.

@@putkins26 just have to swap for Kraton hexs, hubs, and stub axels. They work together for an extra inch of width 👍. Throw some offset 17mm hex Trencher 2.8's or MX28''s on and you're left with a much wider stance overall plus more cushion and ground clearance for rougher terrain. 🍻😎💪👊👊

@@richduperbash2966 ok cool. I've seen where people swap out the A-Arms front and back and do awhile bunch of other things, but that just makes it to wide I think. I'm going with your way. I like it a whole lot better. Great videos as always.

@@richduperbash2966 also, can you send me a link to all the parts? Just wanna make sure I get the right things.

@@putkins26 here's a link to Jenny's RC with the part #'s listed. It's often cheaper to grab stuff from them or other eBay parts sources. I've found the extra included stuff to come in handy later. jennysrc.com/collections/arrma-outcast

Thanks so much brother Eric 😜!!!! Shout out well deserved as always 🤙. Just glad I could bum the Hobbywing out of my eb48.4 to get back out after my midair seize up 😱🤣🤣. It sucks my original vid wouldn't upload 😝. I started pulling clips left and right thinking perhaps one was corrupt. Probably an issue with my driver or software 🤔. I had a clip of me pulling the rotor out all mangled that was pretty funny actually 🤣🤣. The Typhon was hauling ass and hanging tough though. Hopefully get the other mixed footage up soon. We're doing what we can at that spot, but that junk pile is huge pieces of lumber bolted together 👀. I'm stoked to see your new Hybrid Bro 😱!!!! That power setup in a SWB is Nuts. Appreciate the kind words Brother. 🍻🚀🚀😎💪👊👊

Thanks so much Gary 🤗!!!! It's been an honor testing both the Tekno and ARRMA M2C upgrades. It's a team effort and approach that assures parts fit and perform as designed 👍. We often make tweaks and adjustments to the prototypes if necessary. This vid got cut short Brother 👊. I ended up breaking a shock shaft and cracking a front A arm 👀. Both are pretty rare events fortunately. Appreciate the kind words Brother!!! 🍻🚀🚀😎💪👊👊

Thanks Brother 👊!!!! Yeah the Terremoto's just aren't stout enough for anything rough I guess. So stoked about all the Killer upgrades Mitch is doing 😱🥰🥰. He's been on absolute fire in his shop 👀. Looks like he perfected his tumbling process too. These mounts and his chassis's are so smooth it's Crazy. Sure they'll get roughed up, but it's clear he's passionate about the final products being nothing short of stellar!!!! 🍻🚀🚀😎💪👊👊

Rich Duperbash forgot to mention that saucer flip was cool!

That's funny my friend 🤣. He'd been wanting to get these done a few weeks ago, but was busy with other projects too I think. Mitch has an incredible creative ability and his understanding of machining is next level 👀. We're fortunate to have his genius and all the other great aftermarket options available. 🍻👍👍😎💪👊👊

Thanks so much dear Brother 😍!!!! She's an animal with the Hobbywing 2200 combo 😜. Just so dang fast. Felt awesome to send her on hard throttle 🥰🥰🚀🚀😎💪👊👊

Thanks Brother 😜!!!! Love the Typhon 6s 🍻🤙🤙😎💪👊👊

Thanks so much Tom 🤗!!!! I actually like the Terremoto's just can't beat on them too crazy 👍. They're so light for their size. This M2C mount and hinge pin kit is working awesome 😱!!! Appreciate the kind words as always Brother 🍻🤙🤙😎💪👊👊

Thanks so much Brother 👊!!!! The Typhon takes such a beating 👀. Even bone stock I was impressed with it. 🍻🤙🤙😎💪👊👊

Thanks so much Chris 🤗!!!! I decided this Truggified is staying in buggy form 😍. Just so bloody fast and solid AF 💪. Building another wider version right now with either a bug or truck style body. The new blocks are butter smooth with the Delrin inserts 👌👌😎💪👊👊

Great choice Jedediah 😱!!!! That's really the way to do it 👌. It's good to have some on the deck and some on the runway waiting for take off 🤗🚀🚀😎💪👊👊

Thanks so much Brother 🤗!!!! 🤙🤙😎💪👊👊

@@richduperbash2966 your very welcome brother

Thanks so much Philip 🤗!!!! I'm stoked about these new mounts Brother 👊. Mitch does such amazing work. 🍻👍👍😎💪👊👊

Duratrax for the win!!!!

Thanks so much Cam 😜!!!! I'm slowly building another Truggified like old Orange Darling 👀😍😍. Keeping this one as is for pure buggy rippage 😋. Just so bloody fast and agile. The others are all fun, but she keeps my attention like no other. 🍻🚀🚀😎💪👊👊

Funny I’ve just finished rebuilding mine as we speak. Put the M2C chassis and motor mount on her. I still need some towers and a HR gearbox case to get but it’ll do for now.

Thanks so much Bro 🍻. Yeah the bolt through design makes a lot of sense when you think about it 👍. The pins on Delrin is silky smooth and takes load off the diff case during stacks for sure. The Typhon is so friggin durable it's ridiculous 🤣👍👍😎💪👊👊

Thanks so much John 👊!!!! Always good talking with ya Brother. Can't go wrong with the Talion or Typhon 😍. Definitely both favorites in my book. Love the option to rip street with them too. 🍻🚀🚀😎💪👊👊

Thanks so much Kizzel 🤗!!!! Wish the entire vid would've loaded 🤣. Had some great footage with my buddy Aaron rippin it up with his Kraton and Talion. 🍻👍👍😎💪👊👊

Thanks Brother 👊!!!! This rig is definitely a screamer 😱. Such a Blast to rip around. I always look forward to Eric's uploads 🤗👍👍😎💪👊👊

Thanks so much Brother 👊!!!! I think it's the ridiculous speed and twitch buggy handling 😍🤙🤙😎💪👊👊

Thanks so much Aaron 🤗!!!! Yeah this video just wouldn't cooperate 😝. I had footage of me pulling the rotor out completely mangled 😱🤣🤣 plus KILLER Outcast, Kraton, and Talion stuff with my buddy 😔. Definitely going to do another upload with it soon 👊. Think I need faster SSD drivers, stronger graphics card, and more RAM 👀. My system is old school and getting updated pronto. I'd rather invest and spare myself the misery and wasted time trying to edit as I please quickly. Mitch has hit another home run with this wonderful design 😍👍👍😎💪👊👊

Thanks so much Matty 😜!!!! She's still my favorite hands down 😍. Just a friggin Rocket 🚀🚀😎💪👊👊

@@richduperbash2966 Agreed 😎😎 I've gotta run the typhon in full hybrid but I'll probs go back to trug spec after😶 .. and get the outcast rebuilt .. yet again 😂

@@RcA_Rc sounds awesome Bro 😍. Look forward to seeing them back out again🔥🔥

They truly are Jesse 🤗!!! This one is upgraded, but I still remember bone stock being blown away by the speed and handling 😱😎💪👊👊

Thanks Dan 🤗!!!! Happy bashing Brother 🍻🤙🤙😎💪👊👊

Thanks so much brother Chris 🤗!!!! Can't believe how nice the finish is with Mitch's tumbling process 👀🥰🥰. I've always said I put looks way behind function, but the it's hard not to love how silky smooth these parts feel in the hand 😱🤣🤣. Had another Blast out there testing them 👊. Borrowed my other Hobbywing 2200 out of my eb48.4 after my first one turded out midair. That slicer was pretty gnarly Bro 🙀. There was so pulling out this time...Lol🤗. She took a solid beatdown for sure. Mitch's towers passed another serious test. Props to him for making a great rig fantastic 👏👏🚀🚀😎💪👊👊

Thanks Brother 🤗!!!! Had a blast out there 🍻👍👍😎💪👊👊

LMAO 🤣!!!! Thanks Jason 🤗. Love my precious Truggified Typhon 🥰🚀🚀😎💪👊👊

@@richduperbash2966 precious.... I hate to see the way you treat something you don't like ! 😝 😂. 👍

@@jasonbudd2950Jag I treat her rough, but she keeps asking for more 🤣🤙🤙

@@richduperbash2966 LMFAO 😂.

Thanks so much Mike 😜!!!! The Typhon definitely fly's like a bird 🤙. Really appreciate it my friend 🍻🚀🚀😎💪👊👊

Think he is a pilot part time🤣🤣 and a true rc Hobbies master😎

They really are Brother 😱. Fantastic versatility and performance with both the Talion and Typhon. I'm sure they haul ass in the drags. 👀👍👍😎💪👊👊

@@richduperbash2966 hahaha yes they are beasts! Check out some of my vids man! 👍👌

Thanks so much Sean 🤗!!!! Kev's a good guy 🍻. I'll try and incorporate links in my vid descriptions. This rig and my Kraton is mostly M2C upgrades; chassis, towers, standoffs, ZRS caps/pistons. I'm also running some Voltage Hobbies; chassis braces, servo mounts, but his inventory took a major hit. I'd recommend visiting M2C Racing for top quality 7075 upgrades.m2cracing.net/48-typhon

@@richduperbash2966Thanks man! What wt do you have in your Kraron difs and shocks? Mitch is awesome! O hope more manufacturers get him involved. Redcat needs to get someone like RPM on board making upgraded plastics too. Looking forward to your next content.Are you gonna check out the new Redcat Kaiju? Redcat doesnt seem to have a lot oF YT bashers..real bashers who SEND IT reviewing their stuff. Keep up the fun and much yhanks!

Thanks Stevo 😜!!!! The Typhon fly's with the best of them 🤗👍👍😎💪👊👊

Thanks so much Tee 😜!!!! Love me some Typhon 6s 😍. Just so Crazy fast and fly's like a bird. 🍻🤙🤙😎💪👊👊

Thanks so much Ed 🤗!!!! I also have tons of Voltage 👍. These have an advantage of taking impact pressure off of the diff cases via the Delrin inserts. The 3rd hinge pin is simply a spare Mitch decided to include. 🍻😎💪👊👊

Thanks Brother 👊!!!! I was thinking they might work on the Talion for just rippin around. 🍻😎💪👊👊

Thanks so much Tony 🤗!!!! Yeah I had my doubts about these lighter spoked wheels 👀. Probably fine for just rippin around. Had a Blast with my beloved Truggified Typhon 6s 🥰🥰🥰. Really appreciate it Brother 🍻!!!! 🤙🤙😎💪👊👊

Hey Brother 🤗. My original Truggified typhon uses stock dog bones and turnbuckles. My Truggified XL has Mojave arms, dog bones, and turnbuckles along with Mojave wheels and M2C +5mm hexes.

Thanks so much Nick 🤗!!!! Mitch did a fantastic job with these hinge pin kits. Definitely takes some strain off the diff cases and arms with the Delrin inserts 👌. Not sure on my 2nd favorite 🤔. I'm loving my Crusher K8s at the moment, but the Talion 6s and my modded Kraton 4s are 2 that also come to mind 😱🤣🤣. It's like trying to pick a favorite child. Just can't do it....Lol. 🍻👍👍😎💪👊👊

Hey Connor. I'm using Kraton hexs, hubs, and stub axels for a wider, more stable stance. Adds about 1" total. Key upgrades are 4mm 7075 M2C Goliath Series chassis, M2C towers, M4 shock standoffs, suspension blocks, and 7075 chassis braces. Also use a Typhon Tbone Basher 6s front bumper and RPM rear skid plate. Wheels are Proline MX buggy. Here's a link to M2C Racing. Don't forget to use the m2ccoupon code for some savings. 🍻😎💪👊👊m2cracing.net/48-arrma-typhon-6s-v4-and-v5-model

Thanks so much Raymond 🤗!!!! Not sure on height or distance but she's getting sent pretty far 🤣. The Typhon 6s fly's with the best of them 😍. So happy to hear about your BRCC Brother 👊. ARRMA has put out such awesome variety the past year especially. Appreciate the feedback and kind words. 🍻🚀🚀😎💪👊👊

@@richduperbash2966 I have given all my friends your links so I hope they subscribe. I got the outcast 6s, kraton 4s, big rock, and rustler vxl. What should I get next? For bashing...

@@richduperbash2966 Hopefully I can travel down by you so we can bash/break/the rigs. Lol. 😂 Im considering getting the Kraton 6s. What upgrades do u suggest out the back?

@@raymondrodriguez7177 I still stand by the core basic upgrades; aluminum chassis supports, servo mount, and the curved wingmount/chassis brace stop piece 👍. Also rear RPM skid plate and Tbone or RPM front bumper. Here's a link to an older but relevant mod vid. This was prior to M2C Racing moving from mostly race parts into the bashing scene. 🍻kzfaq.info/get/bejne/gsueiK-DsdSbYJ8.html

@@richduperbash2966 Thank you for the info. What u do to the rigs after runing on wet conditions? Do u recomend complete teardown and clean up? What lubricant do you use for moving parts?

I use mostly Hobbystar compact single 6s hard packs. 5000mah 100C and 4800mah 50C.

Yes indeed Brother 👊. There's limited travel and arms level is perfect 👌. Totally normal to achieve pretty easy chassis slap. You can experiment with heavier oils and just see if you like it. Shock set-up is such a preference thing. I always avoid too stiff or bouncy with mine. 🍻😎💪👊👊

Rich Duperbash thanks king your input and replies me the world to me. Im so great full what you do for this hoppy.!!

My MT41O has been taking a break 👍. I'd borrowed the electronics for my eb48.4 awhile back. I do prefer my upgraded ARRMA's for hard bashing overall. The Tekno is smoother and handles great though. 🍻😎💪👊👊

Thanks Brother 👊!!!! Yes indeed. It's been awhile since I had an issue, but I've had weak switches prone to shut off before. You might try mounting the switch sideways. I've zip tied or even taped mine in the on position before. I'm not a fan of sliding switches. The Hobbywing push button style are problem free. 🍻😎💪👊👊

I'm running 50/200/20k front to rear diffs. 😎💪👊👊

@@richduperbash2966 right on thanks man

Think I'm running stock oil weights 🤔. That's 500cst or 40 weight. 😎💪👊👊

Thanks Jeff 🤗!!!! It's the family Man Van 🤣. I normally drive my hopped up Subi, but the ramp fits perfectly in the van. It actually works great for packing in RC gear. 🍻🚀🚀😎💪👊👊

Thanks so much Nickolas 🤗!!!! I'm still a switch hitter with the Truggified tires. These Duratrax Lockups and the new Proline MX buggy wheels are supreme for absolutely hauling ass off-road 👀. Both have had glue issues though. I still love strapped and vented MX28's for my go to bigger 2.8 bash wheel. 🍻😎💪👊👊

Thanks Brother 🤗!!!! Yes indeed. The Typhon is an incredible little Beast 👀. She packs and tumbles, but ends up wheels down most times..... just keeps rippin 😍!!!! 🍻🤙🤙😎💪👊👊

The benefit is a much more stable platform and the ability to mount bigger 2.8 MT wheels (Trenchers and MX28's) without wheel scrub on the hubs. There's no downside that I've experienced. It adds an inch of width and much more with offset wheels. 😎💪👊👊

Those are Redcat Mt10e Terremoto wheels 👍. I do like them overall, but the spokes are vulnerable. Maybe good for road and lighter mixed use bashing. They probably hold up better on a lighter 1/10th. 😎💪👊👊

That's the Hobbywing 2200kv combo with 16T pinion. The stock motor rips too, but this one has more top end. 🍻😎💪👊👊

Thankyou man👍👍😂

I recommend swapping in 200k center diff fluid and venting the tires. I use 1/8" sharpened brass tubing chucked in a drill. Makes venting super easy. Just tape over the rim holes. Duratrax makes nice tires, but the glue beads aren't always the best. 😎💪👊👊 kzfaq.info/get/bejne/ibB_jM2TtZ7VhGQ.html

@@richduperbash2966 thanks man I'll give that a try.

No I didn't swap on Kraton arms. Just Kraton hexs, hubs, and stub axels. It adds about an inch of width and provides the extra clearance to run 2.8 size wheels. Adding Kraton arms would make it an Outcast "Hybrid". Did that also years ago. 🍻

@@richduperbash2966 and how did it perform then vs now ? Handling/bashing ?

@@xXxREDEEMEDxXx-yc9ne the wider "Truggified" Typhon is far more stable than a stock Typhon in classic buggy form. With Kraton/Outcast arms, links, shafts, and towers, it handles like an Outcast. You can do a Typhon/Outcast "Hybrid" as well. It's lighter and faster than an Outcast due to aero and less plastic. Here's one of a few earlier vids kzfaq.info/get/bejne/p-CnbJVpvrvIe3k.html

@@richduperbash2966 oh ok thanks for the reply awsome vids !

It's up to you, but I can say the HR cases I've used have done great 💪. They only add like 4gm of weight each and won't crack or strip out. I honestly think they're a great investment. 🍻😎💪👊👊

I honestly think the stock motor on 16-18T with 6s is a rocket 😱!!!! I'm running a Hobbywing 2200kv on 16T in mine with a Max8 now. My Kraton 8s is sporting a Hobbywing 5687 1100kv with Max5 on 29T 😍🚀🚀😎💪👊👊

@@richduperbash2966 Very awesome... The 5687 is what i've been looking at and of course the Max5, for the Kraton. Typhon might be fast enough but gotta have that Oh Shit factor, lol. You know what I'm talking about. Thanks for replying buddy.

@@scottjones6255 I definitely know what you're talking about 😱🤣🤣

I run 50/200/20k front to rear. My favorite wheel for a Truggified setup is strapped MX28's. Otherwise they balloon badly past 4s power. 😎💪👊👊

It's the M2C Racing Outcast/Typhon 7075 4mm 👀. It's been absolutely flawless for months. Here's the link. 😎💪👊👊m2cracing.net/arrma/59-m2c3005-arrma-goliath-outcasttyphonsentnotor-6s-blx-.html

Thanks man👍👍👍👍👍

@@heyj2324 make sure to use the "m2ccoupon" code if you're gonna grab one. It works for all M2C purchases 👍

Okay, great!👍 Thanks a lot. Keep up the good vids🤜

Somebody has to be numero uno 😱🤙🤙😎💪👍👍

Thanks so much Brother 😜!!!! You're going to love the M2C chassis 😍. Every solid house has a stout foundation. That's great with the channel Bro 👀. Subbed 🍻🤙🤙😎💪👊👊

@@richduperbash2966 cheers yea it will make it as tough as yours hopefully😂😂👍👍. I'm going Mojave chassis and make it an XL

LMAO 🤣!!!! That ramp slicer in slo mo was a perfect side and roof stack 😱. It's a bummer cuz the last 4 minutes wouldn't export. Had some more carnage to share.🍻😎💪👊👊