Thanks man!!!! ♥

Thank You!!! 🎉 🎇

😂🤣😂🤣😂

Hi! Thanks for comment! And to answer your question - yes! This is exactly his setup (not directly from him, but same devices)! Up to the Bitwig project and samples! Richie has shared his Bitwig project and Traktor mapping. richiehawtin.com/DJsetup_Bitwig&Traktor

Hi! Thanks for the question. They are just for my convenience to select the DLY preset from the plugin. These buttons is used because of the PSP42 version 2 so many DELAY presets in CLK mode. There are 26 presets (from "1/96" Triplet up to the "9/1") and all these presets are controlled by just one knob. In the first version of the PSP42 plugin there was two knobs for every digit on the plugin screen. You could change the first digit (5 positions) with one knob and second digit (13 positions) with another knob. So, with these A->B buttons i have made Bitwig macro and mapped them to the every preset I need from the all 26. Every button press just selects the preset i need. The second part is the INPUT knob. With a knob rotation I just pressing the buttons 1, buttons 2, buttons 3, buttons 4 and buttons 5 and backwards (with a little bit help from ADD macro). Here is a link to the short video how it works. Top left corner shows the values selected by A->B buttons from the PSP42 knob "Delay Note" :) Knob by itself is mapped to the Xone K2 real knob. mega.nz/file/UwAAQASS#GqxGcTQ5DJuIqD5bOT3vgVU1D3G-5UoID5dm-IF6dZ8

Thanks for the question! There is no need to be sorry! 😉 I'm using PSP42 via Bitwig. But it's a simple VST plugin and will work via any DAW or even groove box like Maschine.

@@isotoxin because I try to install on Ablaton,but the VST will not be reading

​@@AgniDeva.Maybe it's the problem with 32 and 64 bit plugin/Ableton versions?

@@isotoxin honestly I dont know,in many cases they are read, but sometimes it happens that some VSTs don't read them, like this one.

@@AgniDeva. Unfortunately this is the best I can recommend. Check the versions of Ableton and VST. :/

It is good one yeah? 😎😍

Hey! Thanks for question. By saying 1/96, I mean the settings by the PCM42 style. Like in the version 1 of the plugin. You can enable this like this: mega.nz/file/8oIBlaDb#_EPDBsKhCmCkd0eGbIaoPrnpx4FMaRFfvw6Ucw5EEwo

Hi again. I have edited my replay for You about the CLK settings. And I have added the picture with more settings in video description.

@@isotoxin thank you once again!!

sag mal- daumen hoch 122

If You are talking about the reverb in the loop, then it's from the song. 😅 Actually I don't remember which one. I just needed a simple loop with an expressive mids (snare/hihat/ride) or a catchy sounding theme.

@@isotoxin Okay :-) I had thinked, that is Your Track . I don`t knowed , is it a mastered Track in the DJ Mixing. I had in past 8x 1210mk2 , I think , if you USE a Real EQ with LOWPASS and HIGHPASS, it is BETTER for Your Mixing Technics. Because , if You run den Delay in Feedback , with lowcut and highcut , You can mixing the TONE/sound special . Lowend and Highend can cut special . Normal is a Lowcut at 242hz , but i comes on of the Key of the Track , because the TONE can played from c1 to c2 - which key is the track and how more or less from 242hz is the lowcut. And You can go with lowcuzt up to 1000hz , if it needed or go down to 50hz in parts without drums. My thinking is , if You use a real parametric Eq , You have a better mixing and more fun, if a trick comes good for the crouwd . PSP42 is a realy good GOA Delay ;-) It is perfect for Dubmixing technics. It is a good choose the psp42 to use. I remember , it was my delay in the 1999er . It is the Hammer. Very good sound delay

@@isotoxin Sorry Friend , I wrote it half english , half German language . In Your Language , I wrote : "Nice Reverb on the Kick (I mean the complete mix is nice), or? I don`t know, that is not a DAW track.

@@alfa156c Thanks for the insight! I will try to use this knowledge in the future.