Thank you, some people like to scam others but you speak truth, and I thank you.

GOD BLESS YOU. You are a real human. I don't know you but I am proud of you. We need more people like you on earth hence the life would have been different than now.

Thank you for being honest, not scamming, speaking your mind, building something excellent looking, and for all your efforts. God bless!

Thanks for being honest and explaining why you think it does not work. I am looking all over for a workable design. I have seen the Yildiz motor run for hours and need to find out more of that design before I start turning material. This has become one of my bucket list items and I don't want to quit on it. When I find a workable design, I will share it with every one

You are a good man.!! Keep working your ideas!! John Markidis from Greece.

Thanks for your effort, me too I was trying the same magnet motor project, but not using woods materials, I used jut magnet and swedish bearing. Thanks fir intersting design

Try to use big magnates for Starter and fit the rooter magnates little deeper. Don't give up. You are near to success. May God helps you.....

this is good concept motor,low heat absorbtion ,and low static propertys,as many other fabricaters/builders use plastic or metals..

excelente herr Truman, muchas gracias por compartir su conocimiento.

Translation: I have wasted 10 years of my life

Thank you for being honest.

thanks a lot for saving our time and sharing your experience

Thanks Sir. May be it will be improved soon to a fully functioned magnet motor.

Looking at it I can't imagine how many hours you spent assembling and disassembling repeatedly just to show people how it's done my respect, sir!

A great experience, but the oil companies do not accept the production of generators without power for Inhm you lose, but at the end relieved of their power to prevent this energy is free and produces free generators.

realy ur taking efforts and your mind is open for all not like hild something. great i like your nature

thank you for trying and thank you for the honest opinion just out of curiosity have you tried staggering the stator magnets like the rotor magnets are?

its an amazing build credit where its due and full well deserved thankyou

great work i was interested in this magnet motor i hope this motor will published soon to public

Thanks. You put a lot of work into that. I'm sorry it did not work but you are very truthful!!

Don't throw it out. Even if it doesn't work, it's still a work of art.

Maybe you shoud put the magnets in a half part off the wheel and the other half, you can use as an aceleretor by gravity, a boddy to give velocity again!!! Good work! Bellive your self, and don't give up! Zea gut! Pedro from Brazil! Write me back if you can!

thanks for your work !!! - you need a potmagnet to eliminate the magntic flux -- here an idea i got dont belive me just try it take a (in german - "hutmutter m20" or so) put you magmet inside and you will discover your mags only have flux to one side lets say 90% to 10% on the other side maybe you have seen such mags in a radio sometimes they are in a pot, in the end you need someone to turn you pots for all of your mags and drill bigger holes in your wooden motor.

your honesty is charming. thanks

sir.......can we use steel.....that will not eliminate the magnetic feild...but it will shut the magnetic field and change the route of the force..that made it vibrate

Thank you for the explanation, Daly. I finished watching your video and appreciate the quality of work. You are the first person that understands the problem. Before I make any comments, please let me know if you still got Your project?

Muammer Yildiz's motor (turkish designer) uses a kind of white plastic. Maybe that material prevents dispersion and it channels magnetism. They are selling a generator with that tecnology at US$15.000 + taxes and shipping, for 25A at 220Vac. Price for 2015.

Don't give up. The idea seems feasible. There must be a way to make this work.

Thank you for your efforts , I ask you to install magnets and operating

So if I understand him correctly, all he must do is better isolate the ‘waste’ magnetic field around all the magnets to stop interference. An observation I made also is in the question: how does he get the rotor to advance?...it looks like all the magnets are in alignment on the ‘rotor’..wouldn’t it be prudent to have a few degree variance to advance some of the individual magnet runs? Unless of course that has been accomplished on the ‘field’ side magnets. I can see this working to some degree if he can achieve at least those couple things. Although it may turn, the power output may be minimal. I hope I’m wrong on that. You have come so far...keep going...take a break and come back to it. 👍👍

Have you tried to Shield one end of the magnet to block the field from interfearing with the others?

Magnet motors do work, but you just have to know how to shield off the contra forces of the magnets. Also you can use magnets in combination with coils and electronically eliminate the contra emf.

kindly explain that what do you use metal on surface. hole demo

For what I noticed, the space between the stator and rotor is too close. then how did you place the magnets polarity? N/S, like all in stator are S and all in rotor are N?

So that your magnets do not cancel their effects, you should have positioned it at a 45-degree angle on the rotor or with a different distance so that when they turn, it seems to see an arrow (positioned in wide then narrowing) ..

Still, Sir, it is a beautiful effort. I truly admire you. pierre from New Mexico

it could work if you place a little heavy cycle. so wight is necessary to impulse motion of the rotation. Simple . try throwing a paper and a stone, which one will go far.

Thanks for sharing your ideas.

There is kind of metal used with this motor to prevent magnetic field from spreading, it shield it and keep it in one direction, you need to search for it bro

I want to know the name of the magnet you useded please...

The issue isn't the magnets, I's you're set up. Degree of angle on both sides! Don't leave any spaces on the push that surrounds the cylinder.

Hello, you must have glue 2 magnets in the same palarity, after that put a shaft in between like 2 coins with a shaft in between. other wise it wont work. please keept trying. Nice video. Congratulations.

You should put the magnets inside the feromagnetic jackets before you install all the magnets to rotor and stator,to get one way/focusing direction of magnetic flux

use brass and copper mixture for that material but it will be heavy and expensive cooper can reduse magnet power in other directions

i think it might work if you put some distance between the magnets, looks like they are too close

Great work, just about there. all you need are some coils that are magnets that can be turned on and off, offset from the permanent magnets with minimum power input using transistors to intensify the power to them and it will work. Check out John Bedini Motors and you will see.

everything must be in order to work. main mistake i think was almost no gap between the stator and the rotor, thats why there is some damage on rotor. other mistake was that the stator and rotor wasn't built as one piece but got seperate mountings

How would the halbach array work with this application?

You need to use aluminum not wood, aluminum cancels 50% to 70% the magnetism around the magnet inside the aluminum, only the exposed surface of the magnet is going to push the other magnet

which magnet are used and how it's power

Thank you sir for your research and efforts..

good work bro... where did you end up buying those magnets????

What are you talking about is called magnetic shield and the magnets must be placed in specific angle. One without other will not work.

outside draw a linear stairway magnetic & use only one magnet inside (rotor)& draw a star with 5 magnets (1 each stair) use springs to calibrate the jump presure in jumps each ("1hz") circle complet ... there u have a magnet generator

Have you considered replacing the wood with bizmuth ?

Thank you sir it's project is very useful 👍

Glad you tell the truth. This was my original invention... which was stolen from my shop many years ago... then a few months later showed up on KZfaq. Then all over KZfaq. It was never intended to go online. But some people just couldn't resist to steal my ideas. I'm glad you did this to show people that just because you have an idea, doesn't mean it will work. Especially with magnets. The problem with KZfaq is that people want to Monetize their web pages... so they put up crap on their site and fake it. Which is wrong. I am happy you told the truth in this instance. I am vindicated finally... because I never intended that my ideas be exploited like it has been by stupid people and fools who just want to make a buck.

Can you share me your diagram on this magnet motor?and it’s specification and instruction manual,thank you

you need to have positive and negative rotors and if you have a coil between these rotors to generate power it might just work the gap between the magnets is very important this is something i had in mind since the eighty,s

hi thank you for your presents your project , I need to know more about the magnet , size , imported from where , that all .

we can use this motor in farm or in country with no electricity

Thank you for a great video sir!

Good job! Thanks for your video

please tell me the name of this alternator

you just have to make the outside a fraction wider so it dont rub.

Sir yeh material kahan se prat kiya h

Couldn't you sleeve the magnets in bismuth or bismuth and copper. I would think that would focus the fields

Try fishing magnets, they are powerful on one side. They make them in small sizes about 1” OD.

I like ur honesty. Great design too. It will work. Just got to figure out where to put the magnets. Timing. Like a car motor. Maybe spiral staircase them. Like a drill. Also springs. I would like to help. I can see it in my head.

So how they doing maganting motor to work I think problem is wood and metals ok you can try one more time with metal and thanks for share

Mr give answer why you can tune it on lier such as I dian film which put his leg on earth all cars go on sky

Can you please help me to get this magnetic machine???

sua ideia e muito boa mais quais as medidas do moto e do imas

Thank u very much

Hi, I'm from Argentina, Mendoza, and I'm very happy with your project to generate electricity with magnets and I would love to be able to do it myself. is there any way to get the blueprints of manufacturing? I would also like to ask you some questions For example, the more quantity of neodines, the more speed? I await your prompt response. Thank you in advance

Hi Great project . Do you have blue prints?

hola como te va soy argentino me puedes pasar los planos de ese motor con lo himanes que usaste para armarlo; te lo voy agradecer

Amazing and intresting

Hi, can you,please, give me more information about the angles of the wholes, and some blue prints? I will really appreciate~Only for personal use, of course.

hi iam from India nd I want to make this can u please tell me how to make this

pleas tell me about magnets pole side you put in roter and in stator magnets pole side

Thank you.

always leave a space without magnets to form vortex

Congratulation, it's a very good job, maybe for help everybody

Nice work!

I think it will work, the machine is to heavvy!!! And you can isolate the magnats to make the structure of magnats 20 cm distance

The magnets on both stator and rotor are too close. Separate them more so that on the stator you can place a strip of iron (i) (ferrous material) and a space(/) after the magnet(m). The iron will attract the magnet on the rotor, when the rotor magnet reaches the magnet on the stator it is repulsed: /-i-m-/-i-m-/ and so on. This keeps the imbalance because the attraction to the iron is less than the repulsion from the magnet.

Thanks for saving people money,💪👏👍🇷🇸

Dont give up take help from others who r building

Try changing the magnet position....so they repel each other.... Positive to negative the magnet ... Or negative to negative or positive to positive

Hi sorry i'm late to this Video But I have the Patton to the Perendev Magnet Motor and it Calls for Magnetic Shielding Like Graphite or Stainless Steel if u haven't trashed the unit u might want to try them

Thank you

you're missing the magnetic shielding around each magnet

I've tried to make one of this but I failed, that was way back 2015.

Great project

I noticed in the comments that everyone seems to give advice but I don't see them building one or better yet a working device.

Sir can I get these magnets

Magnets parallel on both sides won't work , they need to be off set in direction , parralel and magnets placed on angle won't work either

Hello for rotor your magnets are ok. But for stator you must use magnets North sud on thé sale face. Half, half. And it will bé good...😉

Is this experience successful or not, please reply please