This video may be 3 years old but it help me very much much appreciated thank you 🙏

Looks Good... When I put one on my 2005 Dodge Dakota I didn't remove the pan either. I used a dremel moto tool with a cut off wheel to cut the plastic. 3 years later a idiot in a Jeep passed me in a snow storm going down the mountain and when coming back over in the lane went sideways 50' in front of me. Had no choice but to hit the brakes or hit him. The Dakota went sideways then head on into the guardrail. A reflector on the guard rail cracked a headlight and the, "bull bar", cracked the chrome grille but that was it. Adjuster said policy wouldn't cover bull bar as it was a accessory. I priced a new grille and headlight at the dealer and asked the adjuster if I could install them. He said the bull bar saved the truck from a lot of damage so he allowed for a new one. After I got the check I ordered the headlight, grille, and bull bar off Ebay and walked away with $120. They work. I put one on my current Nissan Frontier when I got it.

Hard to believe you did that five years ago. I enjoyed that video very much, you're a funny guy. I did that in my best Joe Pesci voice by the way. I have a 2001 Dodge ram 1500 that I'm thinking of buying one for my truck, I saw it on eBay for $174 which is really isn't a bad price. Anyway, I will be referring to your video if and when I buy that cattleguard or bumper guard. Thanks for the video.

I have an 07 Ram and its been on my "to do " list for the last 3 years, some day lol

Good job! Splash guard protects from rust... You should also consider an undercoating that protects from rust as well. I like these kind of videos... car maintenance or enhancements. Cool truck! 😎 Can't wait for your lights to come. 👍

Boy, that really spruces up your truck! Nice job, Rick!

Got a rough country bull bar with LED lights for Christmas! Definitely planning on keeping that lip/splash guard on my '17 Ram. Definitely want to get those black '17 rims too. They look better than chrome.

You did a good job of showing us how to install but I may use my dremel when I cut the valence, good idea on keeping it on. Looks good, I got the same truck but with a quad cab and I wondered how it would look if I put one on, now I know, thanks!

I have a 1992 mustang I have been replacing stuff on, A lot of videos off here help a lot.

Never use ramps on gravel. I learned my lesson the hard way. But nice truck I just added the same bar to mine.

Love your "pillow" at 12:29 That really dressed the front of your truck up. Looking forward to seeing it with the LEDs.

Nothing screams American ingenuity like Working on your truck and a gravel driveway with crocs on

You must of heard me yelling/The jack stands the jack stands.Seen that mistake too many times.Bar Looks Awesome!!! Thanks for sharing.

WOW this Dodge looks SO nice! I really like it!:)

I got a 14 express regular cab. I was wondering what it would look like with a bull bar. Thanks dude!

Nice work Rick. You already had a great looking truck but you just kicked it up a notch ! 👍🏼

Thanks for this video! Now i have an idea on how to put it on myself!!👏🏼👍🏼

Nice truck man. That bull bar looks great! Great video!

Great video. Hilarious! Can't wait to install mine.

That's nice Rick. Can't wait to see the lights you get. Then you'll have to video How it looks at night? Good job. Now show us how it will take a deer out😃

Your truck is bad ass!!!

i was thinking about doing that to my 2011 chevy silverado LTZ i might put a herb bumper on mine! but might keep the splash guard on mine i also have splash guards for the tires as well! bought my truck used last year almost mint 110 thousand miles heated leather and a custom tow package love that truck!!! nice ram 1500 as well!!!

Oscillating tool makes the cuts in the valance much easier

I got a show room condition 2008 Ram 1500 slt Big Horn I'm doing mine next week I do like the black and chrome skid plate looks nice bud I'm excited to do mine I'll post a picture of mine when I get it done. Where did you get that two tone one at? Thank's 👍

Okay, I just subscribed to you. I randomly saw your Sheetz video with the burrito last week. And now this. Too much of a coincidence lol..

From cooking to car work. What can't you do?? :) you guys need to be my neighbor. Haha

I wish i saw this video before i installed mine

Currently doing this on my 2014 Ram 1500 I took off the splash guard lord it was a pain to get off ..... fyi the support brackets are put on wrong the open slotted side goes on the main bracket and the closed side bolts on to the trunk

Now just get a Ram with a Cummings and you'll be set. Lol forreal tho clean looking truck.

I was wondering if you removed the jack stands... Hey nice looking truck, Rick. Thumbs up

I worked up a hell of an appetite watching you do all that work. What's for dinner?

Looks amazing friend. I own a silver Ram with chrome bumpers and can’t decide if I like the black or chrome version more. Also I’m trying to find one that either doesn’t interfere with sensors or relocates them? Thanks

Good job! Smart thinking! Sharp looking!

Awesome job looks great and your truck sounds amazing what kind of exhaust you running brother?

That truck is beautiful

Pretty smooth install Rick. It has nice looks, and when you catch a cow you can bring it home to BBQ. lol. Thanks for sharing this with us. 👍👍

I did remove my splash guard and I had much better perfect cuts then you did right in the money.

Good job. Thanks

very funny video and informative

beautiful

Rick, you should have had it in sport +, +4, driving up on the ramp!! Lol. Could you imagine! The pedal Commander at that setting would be ridiculous driving up the ramps!

cool truck rick

Next mower end of the season put away?

I'd recommend laying cardboard down next time you work on that gravel. Nothing like kneeling 9n some sharp edges of rock on your knees man

Lookin good Rick!

Looks nice!

Did you order the right one, seams to small for your truck

Aw I thought this was how to cook food on a engine block : )

Good somewhat humourous vid, get a dremmel you won't regret it. 👍

Were did you order it from ? I’ve got a 2002 ram 1500 I’m wanting to put one on

What’s the exhaust?

Here in the country deer are bad about jumping out in front us.

💪

What's for dinner after all that work .

now install some hella lights :D

Last time you got that cover it didn't even fit. Remember. Don't look at me. Glasses.

Are you gonna use that to Ram people lol... Should've used a multitool to cut the holes.

Do u smell what the rock is cooking ?!?!??

goober

use a dremel for God's sake....I got exhausted watching this.

Can I ask what the purpose of your bar is?

It heavy hahaha 40 pounds !!!

Dude get a dremel tool

"saved an hour" lol spent an hour using a blade to cut, instead of a Dremel lolol.

Poor show